Jason
Is the topology stable, or are you seeing repeated topology changes in your
statistics?
Billo
Data Communications Co-Ordinator
Information Technology Telecommunications
ph 0249 213804 fax 0249 213038
william.ol...@hnehealth.nsw.gov.au
-Original Message-
From: Jason Grubbs
BTW, I should have added that you can get much the same output from this
command on the S;
S4bonded (su)-show port egress tg.*.*;lag.0.1
tg.2.101104 untagged static
tg.6.101108 untagged static
lag.0.1 1 untagged static
lag.0.1
We use MRTG for historic BW charts, and this works well. It takes some work to
write the scripts, and depending upon how many interfaces you want to look at,
it could take quite a lot of work.
We use Spectrum for real time BW monitoring, but Netsite could work just the
same for this task.
Scott
That is correct, you should not be able to ping the virtual IP address.
Billo
Data Communications Co-Ordinator
Information Technology Telecommunications
Hunter New England Health Service
ph 0249 213804 fax 0249 213038
my config was correct, I just can't ping the VRRP IP address without this
command?
Scott
No, you cannot ping the virtual ip without that command, unless one of the
routers has the virtual ip as the vlan interface address, as you discovered.
This function as design for vrrp.
Billo
Data
licenses for routing.
Sean
-Original Message-
From: William Olive [mailto:william.ol...@hnehealth.nsw.gov.au]
Sent: Sunday, May 01, 2011 4:17 AM
To: Enterasys Customer Mailing List
Subject: RE:[enterasys] Configuration question
Sean
What was the issue that caused you to re-think your
Sean
What was the issue that caused you to re-think your routing strategy?
And what budget constraint implies that you must use static routes as opposed
to a dynamic routing policy?
Billo
Data Communications Co-Ordinator
Information Technology Telecommunications
Hunter New England Health
Charlie
We run a network that covers a geography the size of Texas and includes several
large hospital campuses. The Enterasys LC03 long haul MGBIC handles
transmission over MMF of both 50 62.5 micron for us without a problem. This
is a much lower cost solution than SMF.
Billo
Data
Lamine
The traffic is already classified by the L2 header.
What further classification do you wish to do?
Billo
Data Communications Co-Ordinator
Information Technology Telecommunications
Hunter New England Health Service
ph 0249 213804 fax 0249 213038
Andy
Did you try an ftp transfer?
Billo
Data Communications Co-Ordinator
Information Technology Telecommunications
Hunter New England Health Service
ph 0249 213804 fax 0249 213038
william.ol...@hnehealth.nsw.gov.au
-Original Message-
From: Andy Middlehurst
Fritz
You can get 'octopus cables' to emulate the rj21 patching.
Doesn't help much if you need to pull a blade, but it is a help for general
patching.
Billo
Data Communications Co-Ordinator
Information Technology Telecommunications
Hunter New England Health Service
ph 0249 213804 fax 0249
Aern't Siemens and Enterasys joined now?
Anyway, here's a DHCP config. You do this in the switch BTW.
set dhcp enable
set dhcp exclude 10.1.1.94
set dhcp pool data
set dhcp pool data dns-server 10.8.4.8
set dhcp pool data default-router 10.1.1.94
set dhcp pool data network 10.1.1.64
BTW
Should have mentioned, you do not need to include a IP helper-address
in the router (seems obvious, but you never know).
Billo
Data Communications Co-Ordinator
Information Technology Telecommunications
Hunter New England Health Service
ph 0249 213804 fax 0249 213038
Regards,
Abhijit Pal
SIEMENS Information systems Limited.
GO/ GTAS(Global Technology Application Services)
13th Floor, Tower-2,Millenium City Bldg,
DN-62,Sector-5,SaltLake, Kolkata-700091.
DID:+91 33 2339 9396
Board:+91 33 2339 9000
Fax:+91 33 2339 9001
-Original Message-
From: William
Tom
I can't answer your question, except to say that we run a large number
of DFEs and, alone in my experience of network equipment, I have never
seen one fail.
Like the Cabletron box they evolved from, they are bomb proof.
Billo
Data Communications Co-Ordinator
Information Technology
Abhijit
To get the C3s to route between the vlans, you enter 'router' mode.
#router
#enable
#configure t
#(conf) interface vlan 20
#(conf interface) ip address n.n.n.n m.m.m.m
#(conf interface) no shutdown
#(conf interface) exit
$(conf).
Very Cisco like and easy to understand.
Billo
Lou
Fill half the slots with 3G modules and the other half with non proxy DFEs and
you'll have two seperate chassis.
Billo
Data Communications Co-Ordinator
Information Technology Telecommunications
Hunter New England Health Service
ph 0249 213804 fax 0249 213038
17 matches
Mail list logo
