: RE: [enterasys] Help with dot1x reauthentication
Hi Jolyon/Patrick,
I increased the times for the following attributes and set the uplink to
forced-auth.
set dot1x auth-config quietperiod from 3600 to 65535
set dot1x auth-config txperiod from 3600 to 65535
set dot1x auth-config reauthperiod
-Original Message-
From: Patrick Printz [mailto:ppri...@qcc.mass.edu]
Sent: 10 November 2011 01:44 PM
To: Enterasys Customer Mailing List
Subject: RE: [enterasys] Help with dot1x reauthentication
You set eapol to forced auth too, correct?
Sent from my Android phone using
What are your nic settings for 802.1x?
From: Mamabolo, Pheko [mailto:pheko.mamab...@siemens.com]
Sent: Wednesday, November 09, 2011 2:54 AM
To: Enterasys Customer Mailing List
Subject: [enterasys] Help with dot1x reauthentication
Hi
Please advice, we have enabled dot1x on an N3
Pheko,
We dealt with this about a year ago, I was digging and trying to remember what
we did to fix it. First off, I would make sure the firmware is up-to-date. The
issue we had though was EAP packets hitting the ports on the switch and causing
any attached PC’s to re-authenticate. The timing
job well.
~Martin Luther King, Jr.
-Original Message-
From: Patrick Printz [mailto:ppri...@qcc.mass.edu]
Sent: Wednesday, November 09, 2011 10:18 AM
To: Enterasys Customer Mailing List
Subject: RE: [enterasys] Help with dot1x reauthentication
Make sure authentication is disabled on your
doing in the world had been declared impossible
before they were done., Louis D. Brandeis
From: Mamabolo, Pheko [mailto:pheko.mamab...@siemens.com]
Sent: Thursday, 10 November 2011 12:30 AM
To: Enterasys Customer Mailing List
Subject: RE: [enterasys] Help with dot1x reauthentication
-
From: Jolyon Ansuz [mailto:jolyon.an...@une.edu.au]
Sent: 10 November 2011 04:19 AM
To: Enterasys Customer Mailing List
Subject: RE: [enterasys] Help with dot1x reauthentication
Pheko,
On our edge network C-chassis’ we use:
#eapol
set dot1x enable
set dot1x auth-config reauthenabled true
