...@enterasys.com
To:Enterasys Customer Mailing List enterasys@listserv.unc.edu
Date:05/09/2013 12:58 PM
Subject:Re: [enterasys] Wired 802.1x
--
I have seen behavior like this if the client is set to the default of use
smart card. Check
:* Re: [enterasys] Wired 802.1x
That's not good. I want to keep Admin-Edge. I do have 802.1x
listed as first. 802.1x is working just fine if I store my
credentials within the supplicate. My only problem is that I cannot
get prompted by Windows.
On Tue, May 7, 2013 at 1:34 PM
!
Best Regards,
Bob Perry
*From:*John Kaftan [mailto:jkaf...@utica.edu
mailto:jkaf...@utica.edu]
*Sent:* Tuesday, May 07, 2013 2:43 PM
*To:* Enterasys Customer Mailing List
*Subject:* Re: [enterasys] Wired 802.1x
That's not good. I want to keep Admin-Edge
[mailto:jkaf...@utica.edu
mailto:jkaf...@utica.edu]
*Sent:* Tuesday, May 07, 2013 2:43 PM
*To:* Enterasys Customer Mailing List
*Subject:* Re: [enterasys] Wired 802.1x
That's not good. I want to keep Admin-Edge. I do have 802.1x
listed as first. 802.1x is working just
*To:* Enterasys Customer Mailing List
*Subject:* Re: [enterasys] Wired 802.1x
That's not good. I want to keep Admin-Edge. I do have 802.1x
listed as first. 802.1x is working just fine if I store my
credentials within the supplicate. My only problem is that I cannot
*From:*John Kaftan [mailto:jkaf...@utica.edumailto:jkaf...@utica.edu
mailto:jkaf...@utica.edumailto:jkaf...@utica.edu]
*Sent:* Tuesday, May 07, 2013 2:43 PM
*To:* Enterasys Customer Mailing List
*Subject:* Re: [enterasys] Wired 802.1x
That's not good. I want to keep
List
*Subject:* Re: [enterasys] Wired 802.1x
That's not good. I want to keep Admin-Edge. I do have 802.1x
listed as first. 802.1x is working just fine if I store my
credentials within the supplicate. My only problem is that I cannot
get prompted by Windows
| djohn...@fhsu.edu
From: Karl Gerling gerl...@enterasys.com
To: Enterasys Customer Mailing List enterasys@listserv.unc.edu
Date: 05/09/2013 12:58 PM
Subject:Re: [enterasys] Wired 802.1x
I have seen behavior like this if the client is set to the default of use
smart card
Is 802.1x enabled on the nic?
Sent from my Android phone using TouchDown (www.nitrodesk.com)
-Original Message-
From: John Kaftan [jkaf...@utica.edu]
Received: Tuesday, 07 May 2013, 12:22pm
To: Enterasys Customer Mailing List [enterasys@listserv.unc.edu]
Subject: [enterasys] Wired 802.1x
There may be some switch config settings that might help. Try setting 8021x as
first in priority for authentication. I also have seen admin-edge enabled on
the end system port (spantree) cause 8021x to fail also.
Thanks,
Brian Anderson
of heaven and Earth will
pause to say, Here lived a great street sweeper who did his job well.
~Martin Luther King, Jr.
From: Brian Anderson - ASI [mailto:br...@arcadiasecureit.com]
Sent: Tuesday, May 07, 2013 1:34 PM
To: Enterasys Customer Mailing List
Subject: RE: [enterasys] Wired 802.1x
There may
That's not good. I want to keep Admin-Edge. I do have 802.1x listed as
first. 802.1x is working just fine if I store my credentials within the
supplicate. My only problem is that I cannot get prompted by Windows.
On Tue, May 7, 2013 at 1:34 PM, Brian Anderson - ASI
br...@arcadiasecureit.com
I would try turning it off one port and see if it works. I have a case open
with GTAC on this issue. If you have the same problem you should be able to
link up with that case?
On May 7, 2013, at 1:43 PM, John Kaftan
jkaf...@utica.edumailto:jkaf...@utica.edu wrote:
That's not good. I want to
*Subject:* Re: [enterasys] Wired 802.1x
That's not good. I want to keep Admin-Edge. I do have 802.1x listed as
first. 802.1x is working just fine if I store my credentials within the
supplicate. My only problem is that I cannot get prompted by Windows.
On Tue, May 7, 2013 at 1:34 PM
14 matches
Mail list logo
