Hello,
We have recently bought 10-12 Enterasys switches out of which 2-3 are
SecureStack C3 and rest are SecureStack B3. We have planned to use B3 switches
as L2 and C3 as L3.
L2 switches will have vlan configured in it. The L3 switches will be used for
Vlan routing. The links between L3 and
Set vlan egress ge.1.49 tagged
The tagged option is the 801.Q trunk that you need.
Regards,
Hugo Veiga
Hello,
We have recently bought 10-12 Enterasys switches out of which 2-3 are SecureStack C3 and rest are SecureStack B3. We have planned to use B3 switches as L2 and
C3 as L3.
Hello,
Appreciate your quick response. But still it's not so clear. Cause Cisco
concepts are not getting out of my mind. Oh God please help...:).
Suppose ge.1.1 is the L2 switch port which is connected to L3 switch. And I
want all traffic from different vlan configured on that L2 switch
Hello Pal,
as you know Cisco`s solution is only to define a port as a trunk port to send
all vlan packets to a router or layer-3-engine. This trunk port sends all
traffic from VLAN 1 to 4xxx as dot1q or isl tagged.
You could achieve the same (trunk port) with Enterasys when setting set vlan
Hi,
On the L2 you simply have to modify the egress list as stated below.
If you create for example two VLANs on the L2, you just have to include the
uplink port in the VLAN egress list.
I will copy Christians example:
# create first vlan with id 2
set vlan create 2
# create second
I would suggest something like this (assuming you have cleared configs on the
switches just in case something in the old config conflicts with the new):
L2 switch as follows:
set vlan create 2
set vlan create 3
set vlan egress 2 ge.1.1 tagged
set vlan egress 3 ge.1.1 tagged
(you must tag the
Hello,
If I create vlan20 and vlan 30 on L3 switch then do I have to issue any other
command on that switch for inter vlan routing?
Best Regards,
Abhijit Pal
SIEMENS Information systems Limited.
GO/ GTAS(Global Technology Application Services)
13th Floor, Tower-2,Millenium City Bldg,
Tell us exactly what you need.
All the vlans, the ip address for all of them and also the uplink ports for the L3 and the L2.
Also send witch vlans you need in the access ports of the L2.
Me or someone else will send you a complete config.
Regards,
Hugo Veiga
Hello,
If I create
Abhijit
To get the C3s to route between the vlans, you enter 'router' mode.
#router
#enable
#configure t
#(conf) interface vlan 20
#(conf interface) ip address n.n.n.n m.m.m.m
#(conf interface) no shutdown
#(conf interface) exit
$(conf).
Very Cisco like and easy to understand.
Billo
