Paul,
Don, KD6HQ is correct that delay problems have been documented between HRD
(actually DM780 which is one of several modules) and PSDR; you can search for
these discussions and the reconciliations in order to get these two packages
correctly (v little delay) communicating. I wouldn't ditch
Paul,
I would be pleased to help as well if you contact me off list. I use DM780 and
the logging program (without HRD) successfully with a Flex-5000 and a
Flex-3000,
the 5K running under Windows 7 and the 3K under Windows XP. I also sometimes
use
DM780 with my IC-7700, but I am now almost a
Thanks for the fast replies!
I don't use DM780 or the HRD logbook, but use HRD as a tuning interface for
PSDR.
I have reverted back to PSDR 2.0 for the time being.
Paul Delaney
paul.hamra...@verizon.net
http://k6hr.dyndns.org:8080
- Original Message -
From: Ed Wilson
LinkedIn
I'd like to add you to my professional network on LinkedIn.
- Jim Menefee
Jim Menefee
Broker Associate at Watson Commercial Real Estate
Jacksonville, Florida Area
Confirm that you know Jim Menefee
https://www.linkedin.com/e/4j68mi-gehfmndo-28/isd/1708123101/uRFVOjb2/
LinkedIn
I'd like to add you to my professional network on LinkedIn.
- Jim Menefee
Jim Menefee
Broker Associate at Watson Commercial Real Estate
Jacksonville, Florida Area
Confirm that you know Jim Menefee
https://www.linkedin.com/e/4j68mi-gehfmujd-18/isd/1708123101/uRFVOjb2/
my waterfall display has gone blank, and I can't seem to get it back,
even after full reset.
black in both waterfall and panafall, even if I change the low color
it did work, then mysteriously went away
Flex 1500, PowerSDR 2.08
suggestions?
73
paul
Rich et al,
Paul is asking about the 2.0.8 Beta, not the production 1.8.6, when he speaks
of the CAT delays.
There have been CAT delays between HRD and PSDR for quite awhile, but they took
a turn for the worse in beta 2.0.8
I agree with Paul that significant additional CAT delay between
Are you using DDUtil too?
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Jim Jannuzzo
Sent: Friday, September 24, 2010 8:35 PM
To: astro_maryl...@yahoo.com; flexradio@flex-radio.biz; flexe...@flex-radio.biz
Subject:
Paul,
Check the High side for the waterfall, sounds like it is set too high too,
change it to -130 , low side to -80.Then go to 80 meters, with an
antenna connected the noise level should be in the -110 or -100 range and
should be bright blue.. You can then adjust the High side
Not anymore. When the BobSmeter was released, I used DDutil to semnd CAT to
the meter, and HRD/DM780. I then started hanging other programs off DDutil,
like fldigi and CWSkimmer. After 2.0.8, I stopped all that tomfoolery, and
just ran straight to HRD/DM780 from PSDR. I couldn't get
I had something similar happen the other day. I was moving some gear
around, so shut down PSDR and powerered off the F3000. This is the first
time in many months that the rig has been turned off.
When I powered it all back up everything worked just fine, except no
waterfall display. I
11 matches
Mail list logo