On 1/13/2012 8:12 PM, Tim Ellison, W4TME wrote:
That is a misprint in the draft manual. It was an intended feature of
the FLEX-1500 that was pulled from the final design of the FLEX-1500.
On 1/13/2012 9:37 PM, Don May wrote:
Brian,
Interesting.
Page 4 of the Flex-1500 manual under
Flexers,
Another Flex-1500 question...
The Flex-1500 rear apron FlexWire DB-9 connector has an audio LINE OUT (pin 9).
Is this connection ONLY a low level mono output or is a full 1 watt mono audio
available here?
I already drive a external speaker with audio via the front panel phones jack
Don:
The LINE OUT pin on the FlexWire connector is 1 Volt line level, 1000 Ohms,
so only about a milliWatt. Definitely won't drive a speaker. Intended to
drive
the LINE IN on a stereo or other kind of audio amplifier.
--- Graham / KE9H
==
On Fri, Jan 13, 2012 at 6:14 PM, Don May
On Fri, Jan 13, 2012 at 4:14 PM, Don May donm...@swbell.net wrote:
Flexers,
Another Flex-1500 question...
The Flex-1500 rear apron FlexWire DB-9 connector has an audio LINE OUT
(pin 9).
Is this connection ONLY a low level mono output or is a full 1 watt mono
audio available here?
It is
Sent: Friday, January 13, 2012 7:26 PM
Subject: Re: [Flexradio] Flex-1500 Speaker Audio
On Fri, Jan 13, 2012 at 4:14 PM, Don May donm...@swbell.net wrote:
Flexers,
Another Flex-1500 question...
The Flex-1500 rear apron FlexWire DB-9 connector has an audio LINE OUT (pin
9
- Original Message -
From: Brian Lloyd
To: Don May
Cc: FlexRadio reflector ; Mike Heitmann
Sent: Friday, January 13, 2012 7:26 PM
Subject: Re: [Flexradio] Flex-1500 Speaker Audio
On Fri, Jan 13, 2012 at 4:14 PM, Don Maydonm...@swbell.net wrote
6 matches
Mail list logo