At 22:01 6/12/2014, Mickey Baker wrote:
I'll bet that if you looked at a more specific demographic - hams likely to
spend $3k on a radio controlled by a computer, for example, the balance is
much different.
Yeah, those folks have money, which means they are 92% Windows, 7%
Linux, 1% Mac.
Macs
my waterfall display has gone blank (black)
PowerSDR v2.6.4 -- setup has worked in the past
but not run for ~ 1 month
adjusting the settings has no effect.
reset to defaults didn't help
nothing in the Flex Knowledge base
I'm sure others have seen this - anyone
remember the magic fix?
73
paul
Have you tried rebooting the PC? Several of us including myself see that
once in a while, and rebooting the PC fixes it.
Steve
KC0FU
On Thu, Jun 12, 2014 at 5:19 PM, Paul Wade w1ghz...@gmail.com wrote:
my waterfall display has gone blank (black)
PowerSDR v2.6.4 -- setup has worked in the
Have you tried turning it off and then on again?
https://www.youtube.com/watch?v=nn2FB1P_Mn8feature=kp
On Thu, Jun 12, 2014 at 6:19 PM, Paul Wade w1ghz...@gmail.com wrote:
my waterfall display has gone blank (black)
PowerSDR v2.6.4 -- setup has worked in the past
but not run for ~ 1 month
hi Steve,
thanks, that did the trick.
must be some Windows glitch, so cross your fingers, stand on one foot, and
reboot...
73
paul
On Thu, Jun 12, 2014 at 6:53 PM, Steve Fowler killmo...@gmail.com wrote:
Have you tried rebooting the PC? Several of us including myself see that
once in a
Good old Windows. I'm always curious why Flex painted themselves into the
corner of that environment - twice, it appears. The only PC I own is the PC
to use my FlexRadio.
73,
Mickey N4MB
On Thu, Jun 12, 2014 at 8:07 PM, Paul Wade w1ghz...@gmail.com wrote:
hi Steve,
thanks, that did the
-radio.biz
Subject: Re: [Flexradio] missing waterfall
Good old Windows. I'm always curious why Flex painted themselves into the
corner of that environment - twice, it appears. The only PC I own is the PC
to use my FlexRadio.
73,
Mickey N4MB
On Thu, Jun 12, 2014 at 8:07 PM, Paul Wade
javascript:_e(%7B%7D,'cvml','fishflor...@gmail.com');
To: w1ghz...@gmail.com
javascript:_e(%7B%7D,'cvml','w1ghz...@gmail.com');
CC: flexradio@flex-radio.biz
javascript:_e(%7B%7D,'cvml','flexradio@flex-radio.biz');
Subject: Re: [Flexradio] missing waterfall
Good old Windows. I'm always curious
Just got back from a 3 week vacation. Booted up Computer and rig (Flex 5000)
and found that my waterfall and panfall no longer shows up in Power SDR
2.4.4. display. Just black space where waterfall signals should show.
I reviewed the archives and did the complete reboot that was suggested. (No
Mark,
Is it only the waterfall (is the spectrum panadapter ok?)
Then check the color threshold levels for the waterfall, maybe those values
are corrupted in some way.
HTH,
Rob, PA3CNT
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
the color threshold setting and all is OK.
Mark NU8Z
www.nu8z.com
From: photof...@gmail.com [mailto:photof...@gmail.com] On Behalf Of Rob
Keijzer
Sent: Monday, June 17, 2013 9:24 AM
To: NU8Z
Cc: Flexradio reflector
Subject: Re: [Flexradio] Missing Waterfall
Mark,
Is it only
my waterfall display has gone blank, and I can't seem to get it back,
even after full reset.
black in both waterfall and panafall, even if I change the low color
it did work, then mysteriously went away
Flex 1500, PowerSDR 2.08
suggestions?
73
paul
Paul,
Check the High side for the waterfall, sounds like it is set too high too,
change it to -130 , low side to -80.Then go to 80 meters, with an
antenna connected the noise level should be in the -110 or -100 range and
should be bright blue.. You can then adjust the High side
I had something similar happen the other day. I was moving some gear
around, so shut down PSDR and powerered off the F3000. This is the first
time in many months that the rig has been turned off.
When I powered it all back up everything worked just fine, except no
waterfall display. I
14 matches
Mail list logo
