On 02/02/11 10:25, Anonymous wrote:
O. Hartmannohart...@zedat.fu-berlin.de writes:
Hello.
I just upgraded openoffice-3.2.1 to openoffice-org-3.3.0 and found
myself in a serious issue. Opening openoffice works only sporadically,
in most cases I get the error:
XDM authorization key matches an
On 02/02/11 10:25, Anonymous wrote:
O. Hartmannohart...@zedat.fu-berlin.de writes:
Hello.
I just upgraded openoffice-3.2.1 to openoffice-org-3.3.0 and found
myself in a serious issue. Opening openoffice works only sporadically,
in most cases I get the error:
XDM authorization key matches
Hi list.
We are looking for a small, cheap, decent performing 19 server to run
FreeBSD or possibly FreeNAS, and found the Dell R210 which suits our
needs perfectly.
However, a lot of people seem to have problems with the SAS 6/ir
controller under FreeBSD. According to what I've found on
On 02/03/11 05:14, Martes G Wigglesworth wrote:
Does anyone know what the new minimal install size is?
Minimal, no, but a recent thread about DruidBSD (a rescue system) said
that the whole lot was 24 MB, so that gives you an upper limit.
I remember running across a blurb about FBSD-7 and
On Thu, Feb 3, 2011 at 10:14 AM, Pavlo Greenberg sir_...@onet.com.uawrote:
[SNIP]
But I'm agree with you, OOo's behavior after the last update is abnormal.
Why not give a try to LibreOffice, that is in ports :
http://www.freshports.org/editors/libreoffice/
That's clever but I mean is this normal behavior with netif, have never seem
this before in other *nix base systems. Thanks for the tip. I'll keep it on
my belt now. Lisandro
On Wed, Feb 2, 2011 at 11:32 AM, Paul Macdonald p...@ifdnrg.com wrote:
On 02/02/2011 15:44, Lisandro Grullon wrote:
Alexandre writes:
On Thu, Feb 3, 2011 at 10:14 AM, Pavlo Greenberg sir_...@onet.com.uawrote:
[SNIP]
But I'm agree with you, OOo's behavior after the last update is abnormal.
Why not give a try to LibreOffice, that is in ports :
http://www.freshports.org/editors/libreoffice/
Hello,
I have a dell with 2 dual xeon 6 cores, dual thread cpus (24 logical
cpus)
with that famous perc6 controller, running FreeBSD 8.2 and with
journaling FS (one partition) and 2 SAS drivers of 160GB.
The controller blocks almost all the time.. message is timeout.
I used the mfi config
On 01/02/2011 07:29, pepe wrote:
I have 2001:14b8:10:402::/64 ipv6 from my isp and I cant get it working.
Ifconfig should be ok:
backup# ifconfig rl0 inet6
rl0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500
options=8VLAN_MTU
inet6 2001:14b8:10:402:2::1
On 02/03/11 11:51, Alexandre wrote:
On Thu, Feb 3, 2011 at 10:14 AM, Pavlo Greenberg sir_...@onet.com.ua
mailto:sir_...@onet.com.ua wrote:
[SNIP]
But I'm agree with you, OOo's behavior after the last update is
abnormal.
Why not give a try to LibreOffice, that is in ports :Â
On 3.2.2011 17:53, Thomas Sandford wrote:
On 01/02/2011 07:29, pepe wrote:
I have 2001:14b8:10:402::/64 ipv6 from my isp and I cant get it working.
Ifconfig should be ok:
backup# ifconfig rl0 inet6
rl0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500
options=8VLAN_MTU
inet6
Hi,
On Thu, 3 Feb 2011 07:50:59 +0100
Matthias Apitz g...@unixarea.de wrote:
MA Hello Jens,
MA
MA surf stick is marketing speech and you never know what the ship
MA today below this label and tomorrow, I think. You should convince
MA them and plug it in and see what appears in
On Mon, Jan 31, 2011 at 05:43:20PM +0100, Jan Henrik Sylvester
m...@janh.de wrote:
GSSAPI of Heimdal 1.1 in FreeBSD base is still broken, GSSAPI of
Heimdal 1.4 in ports is supposed to work, but I have not been
successful with Cyrus SASL (see below).
KDC up and working on 8.2-RC2 base
On 02/02/2011 05:56, Neil Short wrote:
old problem on HP laptops. the workaround has been to go to the BIOS and switch
from AHCI to IDE interface; but my BIOS doesn't support switching.
is anybody working on this?
___
freebsd-questions@freebsd.org
Hello,
I've never given this any thought, until I recently bought a Blu-ray
drive, and realised that I can neither mount commercial Blu-ray discs or
watch the films with mplayer. As I understand the problem, it is because
FreeBSD has no support for newer versions of UDF and that Blu-ray films
On Mon, Jan 31, 2011 at 05:43:20PM +0100, Jan Henrik Sylvester
m...@janh.de wrote:
I am struggling with exactly the same problem. Unfortunately, I got
no reply on this list about it:
http://lists.freebsd.org/pipermail/freebsd-questions/2011-January/226495.html
If you get any further,
I just installed the current 3.3 snapshot openoffice.org-3.3.20110121
from good-day.net and it seems to work fine on my 8.1 amd64 gnome
laptop.
Regards,
John Levine, jo...@iecc.com, Primary Perpetrator of The Internet for Dummies,
Please consider the environment before reading this e-mail.
Hello,
I tried to burn a little iso with ahci(4) instead of old ata drivers and
it fails to burn with :
markand@Melon ~ $ sudo cdrecord downloads/ubuntu-10.10-desktop-i386.iso
cdrecord: No write mode specified.
cdrecord: Assuming -sao mode.
cdrecord: If your drive does not accept -sao, try
On Thu, Feb 3, 2011 at 2:36 PM, David Demelier demelier.da...@gmail.com wrote:
Hello,
I tried to burn a little iso with ahci(4) instead of old ata drivers and it
fails to burn with :
markand@Melon ~ $ sudo cdrecord downloads/ubuntu-10.10-desktop-i386.iso
cdrecord: No write mode specified.
On Thu Feb 3 11, David Demelier wrote:
Hello,
I tried to burn a little iso with ahci(4) instead of old ata drivers and
it fails to burn with :
i have similar issues. for me using -tao solved the error.
cheers.
alex
markand@Melon ~ $ sudo cdrecord
On Thu Feb 3 11, Rolf Nielsen wrote:
Hello,
I've never given this any thought, until I recently bought a Blu-ray
drive, and realised that I can neither mount commercial Blu-ray discs or
watch the films with mplayer. As I understand the problem, it is because
FreeBSD has no support for
Boy, this kind of problem has been following around lately. When I
attempt to start Xsane as user I get an error message telling me No
device available. One of the help options states that the permissions
for the device file may not allow its use---try as root. Naturally,
when I start the
On Thu, Feb 03, 2011 at 01:41:24PM -0800, Rem P Roberti wrote:
Boy, this kind of problem has been following around lately. When I
attempt to start Xsane as user I get an error message telling me No
device available. One of the help options states that the permissions
for the device file
old problem on HP laptops. the workaround has been to
go to the BIOS and switch from AHCI to IDE interface; but my
BIOS doesn't support switching.
is anybody working on this?
details:
/$ mplayer dvd://
MPlayer SVN-r30341-snapshot-4.2.1 (C) 2000-2009 MPlayer Team
Playing dvd://.
libdvdread:
2011-02-03 22:38, Alexander Best skrev:
On Thu Feb 3 11, Rolf Nielsen wrote:
Hello,
I've never given this any thought, until I recently bought a Blu-ray
drive, and realised that I can neither mount commercial Blu-ray discs or
watch the films with mplayer. As I understand the problem, it is
Boy, this kind of problem has been following around lately. When I
attempt to start Xsane as user I get an error message telling me No
device available. One of the help options states that the permissions
for the device file may not allow its use---try as root. Naturally,
when I start the
Now that I understand how to get a scanner working, if there are any
photographers out there who are using scanners with FreeBSD for
negatives or slides I would love to hear a recommendation. I have an
Epson V500, but it is unsupported, and the only scanner that I have that
is supported is an
All,
After two days of googling, reading, swearing and cursing, I am finally
admitting I cannot solve this one. I have three production FreeBSD servers
running various network utilities (DHCP, bacula, zabix, syslog, rsync). These
have been running fine for several years. As a primary Windows
Icu is a necessary dependency for Gimp, but I can't get it to install.
I checked UPDATING and it states that icu4 is now deprecated, and one
should install /devel/icu. But when I try to do that the file that is
downloaded is icu4c, and the install goes along until it chokes with
this error
29 matches
Mail list logo
