I have apart from the boot drives a SATA disk for storage. Usually I
would mount it with
mount /dev/ada0p1 /archive
but as my last reboot into
FreeBSD 9.1-STABLE #0 r252369
I cannot mount the disk, I get
mount: /dev/ada0p1: Device busy
Well, busy with what?
fuser -m /dev/ada0p1
/dev/ada0p1:
I
On 2013-09-13 01:30, Polytropon wrote:
On Fri, 13 Sep 2013 00:54:01 +0200, Per olof Ljungmark wrote:
I have apart from the boot drives a SATA disk for storage. Usually I
would mount it with
mount /dev/ada0p1 /archive
but as my last reboot into
FreeBSD 9.1-STABLE #0 r252369
I cannot mount
On 2013-07-20 07:25, aurfalien wrote:
Hi,
Is this;
http://lists.freebsd.org/pipermail/freebsd-current/2012-September/036777.html
... available in the form of a patch for stable rels?
Its ZFS TRIM support.
According to /usr/src/UPDATING, yes:
20130605:
Added ZFS TRIM
Hi,
Is Apache on FreeBSD affected?
Thanks,
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Hi,
Upgraded a system from 8.3 to 9-STABLE and did make delete-old-libs
afterwards. System has around thirty ports installed and all except
bacula-client upgraded gracefully.
Why does it want libz.so.5 when libz.so.6 is present? I'm pretty sure
I'm missing the obvious here...
Linking
On 01/28/13 21:43, Artem Kuchin wrote:
Hello!
I have to made a decision on choosing a dedicated server.
The problem i see is that while i can find very affordable and good
options they do not
provide hardware raid or even if they do it is not the best hardware for
freebsd.
The server base
On 2012-09-28 14:16, jb wrote:
Hi,
the boot of my notebook Lenovo TP r61i stops (sometimes) after usbus6.
$ dmesg
...
atkbdc0: Keyboard controller (i8042) port 0x60,0x64 irq 1 on acpi0
atkbd0: AT Keyboard irq 1 on atkbdc0
...skipping...
hdaa0: Conexant CX20549 (Venice) Audio Function Group at
Trying to run a Linux app under 9-STABLE. I can start it once and stop
it once but all subsequent efforts produces a core dump.
I believe the reason being that this app stores licensing information in
shared memory and when it stops first time it fails to remove this info.
Is there a sysctl
On 08/12/12 11:12, Per olof Ljungmark wrote:
Trying to run a Linux app under 9-STABLE. I can start it once and stop
it once but all subsequent efforts produces a core dump.
I believe the reason being that this app stores licensing information in
shared memory and when it stops first time
On 07/23/12 21:21, Andy Recker wrote:
do u answer questions about y computer aftwer trying to install your program
-- http://www.freebsd.org/doc/en_US.ISO8859-1/articles/freebsd-questions/
___
freebsd-questions@freebsd.org mailing list
A long time KDE3 user but now thinking of Xfce instead as KDE4 is not
really my way of doing it.
One of the things I've found productive in KDE is the Konqerour file
manager, is there anything similar available as a separate app to run
under Xfce?
In particular, it should accept URI's like
On 02/15/12 19:54, Waitman Gobble wrote:
On Feb 15, 2012 9:58 AM, Per olof Ljungmark p...@intersonic.se
mailto:p...@intersonic.se wrote:
A long time KDE3 user but now thinking of Xfce instead as KDE4 is not
really my way of doing it.
One of the things I've found productive in KDE
Hi,
I am in the process of upgrading my laptop from 8- to 9-STABLE, thus
also rebuilding a LOT of ports.
I now notice that Postfix stopped to work with SASL AUTH (TLS and
unencrypted is fine), and it appears that the problem is with
cyrus-sasl2. I've gotten as far as building the sample
Hi,
I am in the process of upgrading my laptop from 8- to 9-STABLE, thus
also rebuilding a LOT of ports.
I now notice that Postfix stopped to work with SASL AUTH (TLS and
unencrypted is fine), and it appears that the problem is with
cyrus-sasl2. I've gotten as far as building the sample server
On 11/01/11 21:48, Al Plant wrote:
I havent recieve any FreeBSD questions Sunday Monday tuesday. No nov
reminder either. Is the service broken?
Works like charm here. Did you try to subscribe again just to check your
account was not accidentaly unsubscribed? And of course you checked your
On 07/20/11 22:07, Jack L. Stone wrote:
At 11:38 AM 7/20/2011 -0800, Beech Rintoul wrote:
On Wednesday 20 July 2011 11:22:44 Beech Rintoul wrote:
On Wednesday 20 July 2011 09:47:33 Jack L. Stone wrote:
Am running FBSD-7.x and IMAP WU + sendmail-8.4.x + MySQL-5.0.x
Sorry to bother the list
Upgraded Perl to 5.12.3, rebuilt ALL ports depending on Perl, everyone
except cups-base compiles fine.
I have rebuilt again using portupgrade -fRX but that did not fix it.
Any suggestions befora I pkg_delete -a and start from scratch?
FreeBSD 8.2-PRERELEASE #0: Fri Feb 25 17:47:56 CET 2011
Answering myself,
On 02/26/11 18:56, Per olof Ljungmark wrote:
cc -Wall -Wno-format-y2k -fPIC -Os -g -fstack-protector -I..
-D_CUPS_SOURCE -I/usr/local/include -O2 -pipe -fno-strict-aliasing
-DOPENSSL_DISABLE_OLD_DES_SUPPORT -D_LARGEFILE_SOURCE -D_THREAD_SAFE
-D_REENTRANT -c -o
On 09/29/10 15:59, Robert Fitzpatrick wrote:
Just want to check here to see if anyone else has experienced the
following errors showing up periodically in the logs on a FreeBSD 8.0
VPS on vmware ESXi...
Sep 29 05:38:35 db1 kernel: mpt0: attempting to abort req
0xff80002a48c0:60350
Hi,
Could someone please recommend a 2- or 4-channel SAS PCI-e 4x RAID
controller that works with 8-STABLE and is generally available?
Thanks!
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
Quoting Per olof Ljungmark p...@intersonic.se:
Hi,
The machine restarts during DVD/Memstick boot, possibly when is
trying to identify the HD. If I take out the LSI 3041E SAS
controller and replace it with another SCSI controller or the
motherboard SATA all is fine, installing other OS's
Hi,
The machine restarts during DVD/Memstick boot, possibly when is trying
to identify the HD. If I take out the LSI 3041E SAS controller and
replace it with another SCSI controller or the motherboard SATA all is
fine, installing other OS's with the 3041 is also fine.
Tried various FBSD
Hi,
Did anyone in the community try to adopt the Entropy Key
http://www.entropykey.com/
for use with FreeBSD?
As a non-programmer I would not even try but perhaps someone with better
skills already did?
FWIW MirBSD seems to have a port of the keyd.
Thanks!
On 11/09/10 01:09, RW wrote:
On Mon, 08 Nov 2010 18:51:08 +0100
Per olof Ljungmarkp...@intersonic.se wrote:
Hi,
Did anyone in the community try to adopt the Entropy Key
http://www.entropykey.com/
for use with FreeBSD?
As a non-programmer I would not even try but perhaps someone with
better
On 11/03/10 00:04, Bartosz Stec wrote:
Hi,
Hello!
I'm doing a major overhaul of our Samba servers including an upgrade to
the latest port version, 3.5.6. I'm getting most things in place but a
remaining problem is that I cannot any longer use mount_smbfs:
mount_smbfs -I 192.168.1.8 //peo
Hi,
I'm doing a major overhaul of our Samba servers including an upgrade to
the latest port version, 3.5.6. I'm getting most things in place but a
remaining problem is that I cannot any longer use mount_smbfs:
mount_smbfs -I 192.168.1.8 //p...@mars/inter /home/mnt
Password:
mount_smbfs:
On 10/31/10 14:06, Per olof Ljungmark wrote:
Hi,
I'm doing a major overhaul of our Samba servers including an upgrade to
the latest port version, 3.5.6. I'm getting most things in place but a
remaining problem is that I cannot any longer use mount_smbfs:
mount_smbfs -I 192.168.1.8 //p...@mars
A ProLiant DL380 G4 with built-in 6i and a SA 6404 will only detect the
6i as ciss0 during boot, the dual 6404 is not seen at all, neither in
/dev/ or pciconf.
All three controllers are visible from the BIOS and configured and
displayed during BIOS boot.
The systems ROM's are less than a year,
uname:
FreeBSD 7.3-PRERELEASE #1: Sun Feb 14 12:07:05 CET 2010
pciconf:
vgap...@pci0:64:0:0:class=0x03 card=0x020d10de chip=0x014e10de
rev=0xa2 hdr=0x00
vendor = 'Nvidia Corp'
device = 'NVIDIA Quadro FX 540 (NV43)'
class = display
subclass = VGA
Rebuilt
Christian Weisgerber wrote:
Per olof Ljungmark p...@intersonic.se wrote:
Does anyone have a recommendation on a good GPS receiver/board for use
with NTP/FreeBSD to create a stratum 1 public time server?
Anything with a PPS output. The Garmin GPS 18 LVC is probably the
cheapest option
Hi all,
Does anyone have a recommendation on a good GPS receiver/board for use
with NTP/FreeBSD to create a stratum 1 public time server?
Preferably something above the Garmin puck level but not ridiculously
expensive either...
Thanks for any input,
--
per
Hi,
Is it possible to have the Quicktime player with Firefox 3 or 3.5? If
yes, a hint how to accomplish this would be welcome!
Is /usr/ports/www/mplayer-plugin viable?
Running 7-STABLE, NVidia graphics.
Thanks,
___
freebsd-questions@freebsd.org
Per olof Ljungmark wrote:
Hi,
Is it possible to have the Quicktime player with Firefox 3 or 3.5? If
yes, a hint how to accomplish this would be welcome!
Is /usr/ports/www/mplayer-plugin viable?
To answer my own question,: yes.
___
freebsd
After a pkg_delete -r pear
I get
/usr/ports/devel/pear# portinstall pear
[Updating the pkgdb format:bdb_btree in /var/db/pkg ... - 204 packages
found (-34 +0) (...) done]
[Gathering depends for devel/pear
. done]
--- Installing 'pear-1.9.0' from a port
Per olof Ljungmark wrote:
After a pkg_delete -r pear
I get
/usr/ports/devel/pear# portinstall pear
[Updating the pkgdb format:bdb_btree in /var/db/pkg ... - 204 packages
found (-34 +0) (...) done]
[Gathering depends for devel/pear
. done]
--- Installing
Bill Moran wrote:
In response to Per olof Ljungmark p...@intersonic.se:
Dan Nelson wrote:
In the last episode (Sep 01), Bill Moran said:
In response to Per olof Ljungmark p...@intersonic.se:
What is a good way to find out how memory is used? Have a 6.4 box where
memory is used by something
Mel Flynn wrote:
On Tuesday 01 September 2009 23:19:23 Michael David Crawford wrote:
Per olof Ljungmark wrote:
Well, my problem is that if I add up all I *can* see in top or ps it
never gets near the by now 3G plus memory shown as Active. Maybe one
gig is accounted for,
I'm not that familiar
Hello,
What is a good way to find out how memory is used? Have a 6.4 box where
memory is used by something but I fail to see what is using it - tried
different switches to ps(1), tried the stat tools but a big chunk of
memory does not show at all.
A proper tool for analyzing memory usage
Bill Moran wrote:
In response to Per olof Ljungmark p...@intersonic.se:
What is a good way to find out how memory is used? Have a 6.4 box where
memory is used by something but I fail to see what is using it - tried
different switches to ps(1), tried the stat tools but a big chunk of
memory
Dan Nelson wrote:
In the last episode (Sep 01), Bill Moran said:
In response to Per olof Ljungmark p...@intersonic.se:
What is a good way to find out how memory is used? Have a 6.4 box where
memory is used by something but I fail to see what is using it - tried
different switches to ps(1
Dan Nelson wrote:
In the last episode (Sep 01), Bill Moran said:
In response to Per olof Ljungmark p...@intersonic.se:
What is a good way to find out how memory is used? Have a 6.4 box where
memory is used by something but I fail to see what is using it - tried
different switches to ps(1
Mel Flynn wrote:
On Tuesday 11 August 2009 12:56:40 Per olof Ljungmark wrote:
Mel Flynn wrote:
On Tuesday 11 August 2009 12:20:00 Per olof Ljungmark wrote:
Mel Flynn wrote:
On Tuesday 11 August 2009 10:53:21 Per olof Ljungmark wrote:
Mel Flynn wrote:
On Tuesday 11 August 2009 09:27:06 Mel
=== Installing documentation in /usr/local/share/doc/pear/XML_Serializer.
=== Installing tests in /usr/local/share/pear/tests/XML_Serializer.
=== Installing examples in /usr/local/share/examples/pear/XML_Serializer.
*** Error code 254
What is Error code 254 ?
Mel Flynn wrote:
On Tuesday 11 August 2009 02:48:49 Per olof Ljungmark wrote:
=== Installing documentation in /usr/local/share/doc/pear/XML_Serializer.
=== Installing tests in /usr/local/share/pear/tests/XML_Serializer.
=== Installing examples in /usr/local/share/examples/pear/XML_Serializer
Mel Flynn wrote:
On Tuesday 11 August 2009 09:27:06 Mel Flynn wrote:
On Tuesday 11 August 2009 08:53:59 Per olof Ljungmark wrote:
Mel Flynn wrote:
On Tuesday 11 August 2009 02:48:49 Per olof Ljungmark wrote:
=== Installing documentation in
/usr/local/share/doc/pear/XML_Serializer
Mel Flynn wrote:
On Tuesday 11 August 2009 10:53:21 Per olof Ljungmark wrote:
Mel Flynn wrote:
On Tuesday 11 August 2009 09:27:06 Mel Flynn wrote:
On Tuesday 11 August 2009 08:53:59 Per olof Ljungmark wrote:
Mel Flynn wrote:
On Tuesday 11 August 2009 02:48:49 Per olof Ljungmark wrote
Mel Flynn wrote:
On Tuesday 11 August 2009 12:20:00 Per olof Ljungmark wrote:
Mel Flynn wrote:
On Tuesday 11 August 2009 10:53:21 Per olof Ljungmark wrote:
Mel Flynn wrote:
On Tuesday 11 August 2009 09:27:06 Mel Flynn wrote:
On Tuesday 11 August 2009 08:53:59 Per olof Ljungmark wrote:
Mel
Apache web server on 7-STABLE running nagios and OTRS. My problem is I
cannot understand what I should increase to satisfy those memory-hungry
Perl scripts?
Out of memory during request for 32 bytes, total sbrk() is 17192960 bytes!
Out of memory during request for 4072 bytes, total sbrk() is
Bruce Ferrell wrote:
Per olof Ljungmark wrote:
Bruce Ferrell wrote:
Per olof Ljungmark wrote:
Hi,
We run 7-STABLE and apache22 with php5 serving pages from a webmail app
(Horde).
Randomly (as it seems at least), there is a 500 (Internal server error)
and a blank page is presented
Hi,
We run 7-STABLE and apache22 with php5 serving pages from a webmail app
(Horde).
Randomly (as it seems at least), there is a 500 (Internal server error)
and a blank page is presented to the user like
[04/Jul/2009:15:19:37 +0200] GET
/services/portal/sidebar.php?httpclient=1 HTTP/1.1
Bruce Ferrell wrote:
Per olof Ljungmark wrote:
Hi,
We run 7-STABLE and apache22 with php5 serving pages from a webmail app
(Horde).
Randomly (as it seems at least), there is a 500 (Internal server error)
and a blank page is presented to the user like
[04/Jul/2009:15:19:37 +0200] GET
Peter Harrison wrote:
Wednesday, 31 December 2008 at 2:06:55 +0100, Per olof Ljungmark said:
Peter Harrison wrote:
Tuesday, 30 December 2008 at 23:49:23 +0100, Per olof Ljungmark said:
Hi all,
Here I am away with the family visiting friends and I REALLY need
to get the iwi if up
Hi all,
Here I am away with the family visiting friends and I REALLY need to get
the iwi if up and running.
It's a recently updated system (7.1RC2). Read the man pages, tried
different variations on legal.intel_iwi.license_ack=1, iwi_load,
firmware_load etc. in /boot/loader.conf but I cannot get
Peter Harrison wrote:
Tuesday, 30 December 2008 at 23:49:23 +0100, Per olof Ljungmark said:
Hi all,
Here I am away with the family visiting friends and I REALLY need
to get the iwi if up and running.
It's a recently updated system (7.1RC2). Read the man pages, tried
different
Hi,
I think sysinstall? got it wrong here and I get the complaint in the
subject line on boot. This is amd64 if that matters. Nothing edited by hand.
I must admit I don't fully understand what is going on here, found 32
but the offsets are 63...
Filesystem on LSI controller amr(4):
#
Jerry McAllister wrote:
On Tue, Oct 21, 2008 at 09:53:52AM +0200, Per olof Ljungmark wrote:
Hi,
I think sysinstall? got it wrong here and I get the complaint in the
subject line on boot. This is amd64 if that matters. Nothing edited by hand.
I must admit I don't fully understand what
Jeremy Chadwick wrote:
You get the point now, I'm sure.
Hi, just to say a big thank you to the people on the list for keeping up
with my dumb questions on sudo, this morning I re-read the manual and
got it working within minutes.
I'm still not convinced that sudo is the way to go in our
Hi,
I'm implementing a shell script as a Nagios plugin to check the status
of the ciss(4) driver. However, there is a permission problem that I am
not sure about the best way to get around in FreeBSD (7-STABLE).
The nrpe daemon that handles the script runs as the nagios user and
the command
Daniel Bye wrote:
On Thu, Oct 16, 2008 at 12:05:01PM +0100, Daniel Bye wrote:
It is possible to configure sudo to run only exactly the required command
(including arguments) precisely to guard against this type of abuse -
I use it extensively in my own nagios setup.
This Cmnd_Alias in sudoers
Per olof Ljungmark wrote:
Daniel Bye wrote:
On Thu, Oct 16, 2008 at 12:05:01PM +0100, Daniel Bye wrote:
It is possible to configure sudo to run only exactly the required
command
(including arguments) precisely to guard against this type of abuse -
I use it extensively in my own nagios setup
Mel wrote:
On Thursday 16 October 2008 22:07:43 Per olof Ljungmark wrote:
Per olof Ljungmark wrote:
Daniel Bye wrote:
On Thu, Oct 16, 2008 at 12:05:01PM +0100, Daniel Bye wrote:
It is possible to configure sudo to run only exactly the required
command
(including arguments) precisely to guard
Mel wrote:
On Thursday 16 October 2008 23:36:51 Per olof Ljungmark wrote:
Mel wrote:
On Thursday 16 October 2008 22:07:43 Per olof Ljungmark wrote:
Per olof Ljungmark wrote:
Daniel Bye wrote:
On Thu, Oct 16, 2008 at 12:05:01PM +0100, Daniel Bye wrote:
snip
nagios ALL=(root) NOPASSWD
Jeremy Chadwick wrote:
On Thu, Oct 16, 2008 at 11:36:51PM +0200, Per olof Ljungmark wrote:
Mel wrote:
On Thursday 16 October 2008 22:07:43 Per olof Ljungmark wrote:
Per olof Ljungmark wrote:
Daniel Bye wrote:
On Thu, Oct 16, 2008 at 12:05:01PM +0100, Daniel Bye wrote:
It is possible
Chris wrote:
I've toyed with LDAP accounts before to get them to work. But now I'm
going to put it into production.
I'm wondering though about user and group management. When ports are
installed on individual servers, users and groups are sometimes added
for daemons. It would be nice to
Christopher Joyner wrote:
I think someone is attempting to get into my system.
Here is my details: There are 2 login failuers on ttyv0,
And also 2 login failers on ttyv0 root.
I did not try login in on that terminal. Are they able to try to do it away
from my computer, from a remote
Al Plant wrote:
Kris Kennaway wrote:
Per olof Ljungmark wrote:
7.0-STABLE #0: Tue Aug 19 20:39:48 CEST 2008
After system update from June 12 sources to Aug 12 I have seen frequent
lockups during network operations. Compiled debugging kernel and got the
below during boot.
Should I open a PR
7.0-STABLE #0: Tue Aug 19 20:39:48 CEST 2008
After system update from June 12 sources to Aug 12 I have seen frequent
lockups during network operations. Compiled debugging kernel and got the
below during boot.
Should I open a PR? Suggestions welcome. Thanks.
Aug 19 22:12:47 kreutzman kernel:
Quoting Stephen Allen [EMAIL PROTECTED]:
Hello,
I'm pretty sure I've done all the necessary steps to be able to ssh
to my FreeBSD box using pam_ldap, but I'm getting Invalid
credentials errors whenever I try (I can successfully perform an
ldapsearch operation though).
Here are snippets
System built from today's sources.
FreeBSD vidar.i.inter-sonic.com 7.0-STABLE FreeBSD 7.0-STABLE #0: Thu
Jun 26 21:27:20 CEST 2008
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/VIDAR amd64
Making install in tests
test -z /usr/local/info/ || ../../build-aux/install-sh -c -d
/usr/local/info/
Martin McCormick wrote:
We have an account on several FreeBSD systems that is
used for automation. Several systems can talk to each other via
ssh by using public keys so that scripts don't have to hold
passwords.
Last night, an account that has been working for years
suddenly
Mike Clarke wrote:
At the end of a portupgrade run for firefox I get the following
=== Registering installation for firefox-2.0.0.14,1
=== Cleaning for firefox-2.0.0.14,1
--- Cleaning out obsolete shared libraries
[Updating the pkgdb format:bdb_btree in /var/db/pkg ... - 626 packages
found
Gabri Mate wrote:
Dear List,
i have a really old (from 2001) ml370 with a smart array 431 raid
controller. FreeBSD 7 installs perfectly but i couldn't find a way to
monitor my drives. I've installed the hpacucli port, but it says that it
can't find any controllers in the system.
Do you know
Hi,
Could someone please point me to information how to achieve this? Have
new hardware that lacks CD/floppy and want to install FreBSD...
Thanks,
--per
___
freebsd-questions@freebsd.org mailing list
Hi,
We have recently upgraded a machine that runs a Linux app from 4.11 to
7-STABLE. Most things are just fine apart from the app can only be
started once. If stopped and then restarted, we see
semget error
Server Stopped
Googling and reading led me to ipcs and ipcrm:
(after stopping the
I'm trying to get better speed from ubsa(4) to use a 3G modem att full
speed. Editing ubsa.c up to 921600 is fine but if I go to 1228800
compile fails:
cc -O2 -fno-strict-aliasing -pipe -D_KERNEL -DKLD_MODULE -std=c99
-nostdinc -DHAVE_KERNEL_OPTION_HEADERS -include
Mel wrote:
On Friday 18 April 2008 11:50:46 Per olof Ljungmark wrote:
'B1228800' undeclared (first use in this function)
/usr/src/sys/modules/ubsa/../../dev/usb/ubsa.c:534: error: (Each
undeclared identifier is reported only once
/usr/src/sys/modules/ubsa/../../dev/usb/ubsa.c:534: error
Hi,
Finally got through to get a Huawei E220 3G modem working, now the
question is, how can max the speed from the serial (USB) port? The modem
is theoretically capable of several mbit/s.
7-STABLE
Thanks for any hints,
--per
___
Robert Huff wrote:
Per olof Ljungmark writes:
Finally got through to get a Huawei E220 3G modem working, now
the question is, how can max the speed from the serial (USB)
port? The modem is theoretically capable of several mbit/s.
With the right driver, the USB stack is capable
http://www.freebsd.org/releases/7.0R/hardware.html#USB
says that Huawei Technologies Mobile card (3G) is supported via
ubsa(4). Can someone here please tell me which model this refers too as
I cannot find this particular card on the manufacturers home page.
Thank you.
Hi,
Some confusion here. A fresh 7.0-PRERELEASE install, sources from
yesterday, no ports installed yet.
I usually configure ntpd as part of the setup procedure and check back
later if it is syncing. Well, today I was in for a surprise I cannot
explain:
%/usr/sbin/ntptrace
Alex Zbyslaw wrote:
Per olof Ljungmark wrote:
Hi,
Some confusion here. A fresh 7.0-PRERELEASE install, sources from
yesterday, no ports installed yet.
I usually configure ntpd as part of the setup procedure and check back
later if it is syncing. Well, today I was in for a surprise I cannot
Per olof Ljungmark wrote:
RELENG_7, csup just now:
Checkout doc/ru_RU.KOI8-R/man/man1/ln.1
Updater failed: Cannot install
/usr/doc/ru_RU.KOI8-R/man/man1/#cvs.csup-31537.67 to
/usr/doc/ru_RU.KOI8-R/man/man1/ln.1: Operation not permitted
Replying to myself here sorry.
uname -a: FreeBSD 7.0
RELENG_7, csup just now:
Checkout doc/ru_RU.KOI8-R/man/man1/ln.1
Updater failed: Cannot install
/usr/doc/ru_RU.KOI8-R/man/man1/#cvs.csup-31537.67 to
/usr/doc/ru_RU.KOI8-R/man/man1/ln.1: Operation not permitted
___
freebsd-questions@freebsd.org
Eugen wrote:
Are there really no experienced FreeBSD users who can help me
with my behind a router problem ? Should I post it again ?
Should I just give up using BSD altogether due to an unusable
system? I would not like this idea, I was really starting to like it.
I'm not a very experienced
Anyone who could point me to how to remedy this?
Thanks,
--per
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Satria Bramana wrote:
Can anyone who had experience running a web-based e-mail give suggestion what
package to use? I will only use it for study purpose, so I need one that easy
to configure and help me understand the big picture about mailserver.. Thank
you very much..
IMP from the Horde
Hi all,
Since quite a while I have had problems with {CURRENT|RELENG_7} SMP
machines that lock up when accessed from a remote location over a vpn
(ipsec) link and sees a ICMP_REDIRECT.
A message, kernel: rtfree: hex adress has 1 refs, will be present in
logs.
Stefan Lambrev opened a PR
yar wrote:
My question is how best to go about debugging sporadic freezes and hangs.
Just looking for general methods.On a couple of our IDS systems there
are sporadic hangs or freezes that occur every couple weeks or so, that are
recoverable by either system reboots or taking out and
Brian wrote:
Per olof Ljungmark wrote:
Per olof Ljungmark wrote:
Per olof Ljungmark wrote:
Hi,
What am I doing wrong?
7-Beta3 vanilla install from CD, I let sysinstall do automatic
partitions and slices, then stops at F1 FreeBSD prompt and beeps.
Obviously it cannot find anything to boot
Per olof Ljungmark wrote:
Hi,
What am I doing wrong?
7-Beta3 vanilla install from CD, I let sysinstall do automatic
partitions and slices, then stops at F1 FreeBSD prompt and beeps.
Obviously it cannot find anything to boot from.
System is a SA6i RAID5-array with 6x300GB disks. Possibly I
Hi,
What am I doing wrong?
7-Beta3 vanilla install from CD, I let sysinstall do automatic
partitions and slices, then stops at F1 FreeBSD prompt and beeps.
Obviously it cannot find anything to boot from.
System is a SA6i RAID5-array with 6x300GB disks. Possibly I need to
enter drive
Per olof Ljungmark wrote:
Per olof Ljungmark wrote:
Hi,
What am I doing wrong?
7-Beta3 vanilla install from CD, I let sysinstall do automatic
partitions and slices, then stops at F1 FreeBSD prompt and beeps.
Obviously it cannot find anything to boot from.
System is a SA6i RAID5-array
jekillen wrote:
Hello:
I have installed Cyrus23 from ports and then read
the pkg-message and it has references to
/usr/local/cyrus and usr/local/etc/imapd.conf
both of which do not exist.
FreeBSD 6.2
Wouldn't the install have created these?
I have lots of docs on Cyrus and Postfix
but none
Olivier Nicole wrote:
Hi,
I have a project where I should set-up a mail server for approximately
12000 users, 4000 virtual domains, 15000 messages per day, 700 MB
traffic per day.
The machine should run Postfix, courrier-imap and a web mail (probably
squirel), Apache 2, spamassassin, clamav,
Hi,
Would some kind soul here advise me how to set up a F-key macro in
minicom so I can break inte the debugger on a machine connected over the
serial port? I assume that means the vt100 escape sequence for ctrl-alt-esc?
Thanks,
--per
___
Christopher Key wrote:
NetOpsCenter wrote:
Christopher Key wrote:
I've a FreeBSD fileserver, a solid state router (Linksys box running
OpenWRT) and a couple of gigabit switches that I'd like to move onto
a UPS (I'm primarily looking at the APC Smart-UPS line).
I have a similar setup in
Hi,
I would like to increase the number of decimals reported in logfiles by
syslogd(8), anyone knows if it is possible and perhaps a hint on how to
do it?
tcpdump for instance, has six decimals: 21:25:20.160833 whereas the
standard syslog has zero decimal secs.
I am only referring to
Hi,
Is there a clever way to run make delete-old in /usr/src so that (y)
will be the default answer? Otherwise it's pressing y 437 times in my
case...
--per
___
freebsd-questions@freebsd.org mailing list
O. Hartmann wrote:
For weeks now I tried to get an OpenLDAP-server on a local FreeBSD
7.0-PRE box running, but with no success. Within the last 8 weeks I
tried nearly EVERY tutorial and there explained setups, but whenever I
try to authenticate or find an ID for an existing user in the DIT, I
snip
This insanity has nothing to do with Postfix, if you can't find the
cron jobs, start scripts, management agents, ... that are doing this,
go back the FreeBSD list and ask for help to find them.
Aloha,
I run Postfix/Dovecot under FreeBSD 7* since Jan 2007.
I had trouble with postfix by
1 - 100 of 280 matches
Mail list logo