Victor Sudakov wrote:
I have several Supermicro-based servers with the mpt RAID adapter:
# mptutil show adapter
mpt0 Adapter:
Board Name: UNUSED
Board Assembly:
Chip Name: C1068E
Chip Revision: UNUSED
RAID Levels: none
#
The problem is, I cannot
Dear Sir,
Please be kind enough to provide solution to the following problem.
I have an old, assembled desk top loaded with win7 ultimate. It has got 80
GB hard disk and 1 GB RAM. Earlier there was XP. That time CD drive was not
working at all. Subsequently I upgraded to win7. After few days
Colleagues,
I have several Supermicro-based servers with the mpt RAID adapter:
# mptutil show adapter
mpt0 Adapter:
Board Name: UNUSED
Board Assembly:
Chip Name: C1068E
Chip Revision: UNUSED
RAID Levels: none
#
The problem is, I cannot configure any RAIDs (please see
On 05/10/2013 21:41, Polytropon wrote:
On Sat, 5 Oct 2013 16:00:25 -0400, Eric Feldhusen wrote:
I see my /usr/src/sys/amd64/conf/GENERIC is a 9.2 kernel, so I should just
be able to do a
cd /usr/src
make buildworld
make installworld
reboot
and I'll be running up on the 9.2 kernel and
outdated system at
home they're there). Of course if the _only_ problem of
the initial question is to install a custom kernel, with
an otherwise updated system using freebsd-update (with
world, kernel and sources in sync), just installing a
custom kernel from within multi-user mode is fully
supported
On 06/10/2013 04:51, Eric Feldhusen wrote:
I figured I'd walk through those steps from start to finish and just
correct my main problem and any other little glitches I might have.
I'm on step 6 and when I run mergemaster -p, I get the following error.
*** Creating the temporary root
I have a server that was/is running 9.1 release that I tried to upgrade to
9.2 release. I missed the step of updating to the latest 9.1 patches by
doing
freebsd-update fetch
freebsd-update install
I went right to
freebsd-update upgrade -r 9.2-RELEASE
freebsd-update install
rebooot
On 05/10/2013 20:11, Eric Feldhusen wrote:
I have a server that was/is running 9.1 release that I tried to upgrade to
9.2 release. I missed the step of updating to the latest 9.1 patches by
doing
freebsd-update fetch
freebsd-update install
I went right to
freebsd-update upgrade -r
Ah, yes, when this particular box was a 9.0-release, I had compiled a
custom kernel to enable ipsec. When I check the strings, it's a 9.1
release kernel.
I see my /usr/src/sys/amd64/conf/GENERIC is a 9.2 kernel, so I should just
be able to do a
cd /usr/src
make buildworld
make installworld
On Sat, 5 Oct 2013 16:00:25 -0400, Eric Feldhusen wrote:
I see my /usr/src/sys/amd64/conf/GENERIC is a 9.2 kernel, so I should just
be able to do a
cd /usr/src
make buildworld
make installworld
reboot
and I'll be running up on the 9.2 kernel and then I'll be all set?
No. You should
I figured I'd walk through those steps from start to finish and just
correct my main problem and any other little glitches I might have.
I'm on step 6 and when I run mergemaster -p, I get the following error.
*** Creating the temporary root environment in /var/tmp/temproot
*** /var/tmp/temproot
Hi All,
I am facing a routing issue for the Interoperability 1.5 topology.
Please find the attachment of the exact topology map.
As per test setup –
Ø Configured REF-Router2 NOT to transmit Router Advertisement on
Network1. But REF-Router2 is able to transmit Router Advertisement on
Hello.
Does anyone have a clue why kernel always directs ESP packets via
default route (or default gateway in FIB 0), even if there are other
FIBs with per-interface routes?
I'm stuck with the gateway, which is connected to 2 ISPs and the
necessity to configure IPSec tunnels on both
From: hrkesh sahu hrisikeshs...@gmail.com
Date: Thu, 3 Oct 2013 19:09:02 +0530
To: Julian H. Stacey j...@berklix.com
Cc: Polytropon free...@edvax.de,
FreeBSD questions freebsd-questions@freebsd.org
Hi, No idea why it was To: me.
Content-Type: text/html; charset=windows-1252
/amd64, I was able to
work around the problem by creating a symbolic link to point
/usr/local/lib/amd64 to /usr/local/openjdk/jre/lib/amd64, as the amd64
sub-directory didn't exist in /usr/local/lib.
This does make me wonder though, if I am just missing something from my
environment, that's causing
is located in /usr/local/openjdk7/jre/lib/amd64, I was able
to work around the problem by creating a symbolic link to point
/usr/local/lib/amd64 to /usr/local/openjdk/jre/lib/amd64, as the amd64
sub-directory didn't exist in /usr/local/lib.
This does make me wonder though, if I am just missing
for the library under
/usr/local/lib/amd64,
the file is located in /usr/local/openjdk7/jre/lib/amd64, I was able
to work around the problem by creating a symbolic link to point
/usr/local/lib/amd64 to /usr/local/openjdk/jre/lib/amd64, as the
amd64
sub-directory didn't exist in /usr/local/lib
the problem by creating a symbolic link to point
/usr/local/lib/amd64 to /usr/local/openjdk/jre/lib/amd64, as the amd64
sub-directory didn't exist in /usr/local/lib.
This does make me wonder though, if I am just missing something from my
environment, that's causing this. Or is the port
/lib/amd64, I was able
to work around the problem by creating a symbolic link to point
/usr/local/lib/amd64 to /usr/local/openjdk/jre/lib/amd64, as the amd64
sub-directory didn't exist in /usr/local/lib.
This does make me wonder though, if I am just missing something from
my environment, that's
On 15.12.2011 20:00, Коньков Евгений wrote:
I am trying to stop process
/usr/local/etc/rc.d/radiusd top
Stopping radiusd.
Waiting for PIDS: 27618
top
27618 freeradius2 20 -20 333M 295M STOP0 4:42 0.00% radiusd
ps aux
freeradius 27618 0.0 7.4 341144 302528 ?? TLs
I have been trying to install virtualbox support for my FreeBSD 9.1. A
package named v4l_compat-1.0.20120501.tar.gz is causing problems in the
installation. The package was downloaded automatically and it exists in
/usr/ports/distfiles, yet it keeps giving an error stating that the file
doesn't
On Thu, Aug 29, 2013 at 7:32 PM, Harpreet Singh Chawla
preet10101...@gmail.com wrote:
I have been trying to install virtualbox support for my FreeBSD 9.1. A
package named v4l_compat-1.0.20120501.tar.gz is causing problems in the
installation. The package was downloaded automatically and it
.tar.gz)?
Amitabh
After deleting, you don't need to download it manually. The port should
download it if needed. Try updating your ports tree to see if the problem
has been rectified.
Amitabh
___
freebsd-questions@freebsd.org mailing list
http
must be code unrot
On 19 August 2013 16:13, Michael W. Lucas mwlu...@michaelwlucas.com wrote:
For the archives:
I left the problem alone for a few days, with no changes on my side.
Came back Monday. Tried again. Everything worked on the affected
machines.
==ml
--
Michael W. Lucas
For the archives:
I left the problem alone for a few days, with no changes on my side.
Came back Monday. Tried again. Everything worked on the affected
machines.
==ml
--
Michael W. Lucas - mwlu...@michaelwlucas.com, Twitter @mwlauthor
http://www.MichaelWLucas.com/, http
Hi,
I'm sure someone has had this before, but I can't find any reference
to it.
# pkg upgrade
Updating repository catalogue
digests.txz 100% 997KB 997.1KB/s 997.1KB/s 00:00
packagesite.txz 100% 5530KB 1.8MB/s 3.2MB/s 00:03
pkg: Invalid
On 16/08/2013 13:43, Michael W. Lucas wrote:
Hi,
I'm sure someone has had this before, but I can't find any reference
to it.
# pkg upgrade
Updating repository catalogue
digests.txz 100% 997KB 997.1KB/s 997.1KB/s 00:00
packagesite.txz 100%
Thanks, Matt.
# pkg -vv | sed -ne '/Repositories/,$p'
Repositories:
packagesite:
url: http://pkg-test.freebsd.org/pkg-test-freebsd:9:x86:32/latest
key:
enabled: yes
mirror_type: SRV
Also:
# pkg -v
1.1.4
==ml
--
Michael W. Lucas -
On 16/08/2013 16:02, Michael W. Lucas wrote:
Thanks, Matt.
# pkg -vv | sed -ne '/Repositories/,$p'
Repositories:
packagesite:
url: http://pkg-test.freebsd.org/pkg-test-freebsd:9:x86:32/latest
key:
enabled: yes
mirror_type: SRV
Also:
#
Matt,
Another data point on this:
Machines converted to pkgng a couple weeks ago can install new
packages just fine despite showing the same error. And it looks like
they download the new repo information:
# pkg install sysrc
Updating repository catalogue
digests.txz
Have you done a pkg update first, just in case you needed to pull in a
pkgng update?
-adrian
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
On Fri, Aug 16, 2013 at 11:23:41AM -0700, Adrian Chadd wrote:
Have you done a pkg update first, just in case you needed to pull in a
pkgng update?
Yep, tried that.
==ml
--
Michael W. Lucas - mwlu...@michaelwlucas.com, Twitter @mwlauthor
http://www.MichaelWLucas.com/,
On Tue, 13 Aug 2013 05:14:52 +0200, Polytropon wrote:
On Mon, 12 Aug 2013 21:01:14 + (UTC), Walter Hurry wrote:
Sorry again. Anyway, I have it nailed down now. For anyone who is
interested, the missing entry was:
options ATA_CAM
Correct. Line 84 and 264 have it commented out.
On Sun, 11 Aug 2013 22:47:36 +1000, Ian Smith wrote:
In freebsd-questions Digest, Vol 479, Issue 8, Message: 10 On Sun, 11
Aug 2013 09:43:57 + (UTC) Walter Hurry walterhu...@gmail.com
wrote:
On Sat, 10 Aug 2013 21:29:10 +0200, Polytropon wrote:
On Sat, 10 Aug 2013 19:04:29 +
On Mon, 12 Aug 2013 21:01:14 + (UTC), Walter Hurry wrote:
Sorry again. Anyway, I have it nailed down now. For anyone who is
interested, the missing entry was:
options ATA_CAM
Correct. Line 84 and 264 have it commented out. This is
the new method of talking to disk devices, similarly
On Sat, 10 Aug 2013 21:29:10 +0200, Polytropon wrote:
On Sat, 10 Aug 2013 19:04:29 + (UTC), Walter Hurry wrote:
This is 9.2-RC1 on amd64 (upgraded from 9.2-BETA1 by refetching the
source from releng/9.2 and rebuilding kernel and world).
The kernel compiles and runs fine using the
In freebsd-questions Digest, Vol 479, Issue 8, Message: 10
On Sun, 11 Aug 2013 09:43:57 + (UTC) Walter Hurry walterhu...@gmail.com
wrote:
On Sat, 10 Aug 2013 21:29:10 +0200, Polytropon wrote:
On Sat, 10 Aug 2013 19:04:29 + (UTC), Walter Hurry wrote:
This is 9.2-RC1 on amd64
On Sun, 11 Aug 2013 22:47:36 +1000, Ian Smith wrote:
In freebsd-questions Digest, Vol 479, Issue 8, Message: 10 On Sun, 11
Aug 2013 09:43:57 + (UTC) Walter Hurry walterhu...@gmail.com
wrote:
On Sat, 10 Aug 2013 21:29:10 +0200, Polytropon wrote:
On Sat, 10 Aug 2013 19:04:29 +
This is 9.2-RC1 on amd64 (upgraded from 9.2-BETA1 by refetching the
source from releng/9.2 and rebuilding kernel and world).
The kernel compiles and runs fine using the supplied GENERIC, but when I
try to use my custom kenel config file, on reboot I get this:
Mounting from ufs:/dev/ada0p2
On Sat, 10 Aug 2013 19:04:29 + (UTC), Walter Hurry wrote:
This is 9.2-RC1 on amd64 (upgraded from 9.2-BETA1 by refetching the
source from releng/9.2 and rebuilding kernel and world).
The kernel compiles and runs fine using the supplied GENERIC, but when I
try to use my custom kenel
On Sat, 10 Aug 2013, Walter Hurry wrote:
This is 9.2-RC1 on amd64 (upgraded from 9.2-BETA1 by refetching the
source from releng/9.2 and rebuilding kernel and world).
The kernel compiles and runs fine using the supplied GENERIC, but when I
try to use my custom kenel config file, on reboot I get
just did a ports update, haven't done one for a few months.
portmaster -w www/firefox
craps out with:
In file included from
/usr/ports/www/firefox/work/mozilla-release/gfx/2d/Blur.cp
p:7:
In file included from ../../dist/include/mozilla/gfx/Blur.h:12:
Hello all,
I have to install in a probably not latest version BSD machine but when I try
to
pkg_add -r vim-lite
Error: Unable to get
ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-9.0-release/Latest/vim-lite.tbz:
File unavailable (e.g., file not found, no access)
pkg_add: unable to
On Jul 23, 2013, at 7:24 AM, Pietro Paolini wrote:
Hello all,
I have to install in a probably not latest version BSD machine but when I try
to
pkg_add -r vim-lite
Error: Unable to get
ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-9.0-release/Latest/vim-lite.tbz:
File
On Jul 23, 2013, at 4:36 PM, Teske, Devin devin.te...@fisglobal.com wrote:
env
PACKAGESITE=ftp://ftp-archive.freebsd.org/pub/FreeBSD-Archive/ports/i386/packages-9.0-releases/Latest/
pkg_add -r vim-lite
Thanks for the quick answer but I got the error:
env
On Tue, Jul 23, 2013 at 5:09 PM, Pietro Paolini pulsarpie...@aol.comwrote:
On Jul 23, 2013, at 4:36 PM, Teske, Devin devin.te...@fisglobal.com
wrote:
env PACKAGESITE=
ftp://ftp-archive.freebsd.org/pub/FreeBSD-Archive/ports/i386/packages-9.0-releases/Latest/pkg_add
-r vim-lite
Thanks
On Jul 23, 2013, at 5:16 PM, Fernando Apesteguía
fernando.apesteg...@gmail.com wrote:
ftp://ftp-archive.freebsd.org/pub/FreeBSD-Archive/ports/i386/packages-9.0-release/Latest/
Yep, thanks a lot !
___
freebsd-questions@freebsd.org mailing list
On Jul 23, 2013, at 8:56 AM, Pietro Paolini wrote:
On Jul 23, 2013, at 5:16 PM, Fernando Apesteguía
fernando.apesteg...@gmail.com wrote:
On 2013-07-23 18:07, Teske, Devin wrote:
(opening a can of squiggly worms here)
Well, then you can go fishing
This is a A sidenotnote
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
Hi,
USB memstick img file is solution for me.
I try FreeBSD-8.3-RELEASE-amd64-memstick.img.
I downloaded this img file and copy to USB, not burn it to USB.
Then attach to İLO such as USB virtual image then sysinstall start, BUT I
selected installation from usb install NOT CD/DVD installation.
Hi,
I'm trying to install FreeBSD with an HP ILO 4 advanced, web interface. I tried
to install FreeBSD 8.2, FreeBSD 8.3 and FreeBSD 8.4. I tried to use acd0 and
cd0 as media. I got the same result.
ERROR: I'm trying to add freebsd8.3iso from ILO such as virtual drive not from
cd or dvd.
In
On 7/4/2013 4:59 PM, Emre Çamalan wrote:
Hi,
I'm trying to install FreeBSD with an HP ILO 4 advanced, web interface. I tried
to install FreeBSD 8.2, FreeBSD 8.3 and FreeBSD 8.4. I tried to use acd0 and
cd0 as media. I got the same result.
ERROR: I'm trying to add freebsd8.3iso from ILO such
On 5 Jul 2013, at 00:01, bw.mail.lists bw.mail.li...@gmail.com wrote:
On 7/4/2013 4:59 PM, Emre Çamalan wrote:
Hi,
I'm trying to install FreeBSD with an HP ILO 4 advanced, web interface. I
tried to install FreeBSD 8.2, FreeBSD 8.3 and FreeBSD 8.4. I tried to use
acd0 and cd0 as media. I
of this problem, but
none of the solutions I've tried have fixed the problem. I'm using
Gnome as my window manager, if that has any bearing on the issue.
Anybody here found a solution, or have an idea?
Thanks very much for any help.
Scott
--
s...@ssr.com
click.
I've googled and found reports on Linux from 2011 of this problem, but
none of the solutions I've tried have fixed the problem. I'm using
Gnome as my window manager, if that has any bearing on the issue.
Maybe this is the reason. Several window managers are using
Alt + left mouse key
-button click.
I've googled and found reports on Linux from 2011 of this problem, but
none of the solutions I've tried have fixed the problem. I'm using
Gnome as my window manager, if that has any bearing on the issue.
Maybe this is the reason. Several window managers are using
Alt + left
On Wednesday, June 12, 2013 3:06:26 am Alex Liptsin wrote:
Hi.
I have a problem that when running a ping (or any other traffic) over IPoIB
port,
Traffic fails after some time.
At destination server DMESG I see that errors:
Jun 11 14:42:11 h-qa-033 kernel: ib1: failed to allocate receive
, don't ask me why there are two slashes.
cp: /usr/local/ETC/asciidoc.conf.sample: No such file or directory
^^^
Is this correct? In my opinion, the correct path name
should be /usr/local/etc/, _not_ in caps!
Ditto, but there lies the problem, the sample configuration files
Hi,
On new 9.1 systems, textproc/asciidoc is being installed as dependency
to many other ports.
But the make install fails with the error:
installing Vim files in //usr/local/share/vim/vimfiles
cp: /usr/local/ETC/asciidoc.conf.sample: No such file or directory
*** [post-install] Error code 1
On Fri, 21 Jun 2013 15:36:35 +0700 (ICT), Olivier Nicole wrote:
Hi,
On new 9.1 systems, textproc/asciidoc is being installed as dependency
to many other ports.
But the make install fails with the error:
installing Vim files in //usr/local/share/vim/vimfiles
^
Hi.
I have a problem that when running a ping (or any other traffic) over IPoIB
port,
Traffic fails after some time.
At destination server DMESG I see that errors:
Jun 11 14:42:11 h-qa-033 kernel: ib1: failed to allocate receive buffer 253
Jun 11 14:42:12 h-qa-033 kernel: ib1: failed
Installed pkg-devel 1.1.0.b3 and get the following message about incremental
update whenever update is called.
sudo pkg update
Updating repository catalogue
pkg: incremental update is not possible as repo format is inappropriate, trying
full upgrade
packagesite repository catalogue is
Hi,
Hope you have rebooted after enabling the gateway, but you can check this with
sysctl net.inet.ip.forwarding :)
So far from the server side it looks OK for me, but what are you pinging
actually?
How is done the configuration of the target device?
This sounds like a pure routing problem
Hi all,
I have problem loading a partial dump of one repository into a new
repository. When I try to load a partial dump of the old repository, which
paths also corrected, I've got the Checksum mismatch error for a file.
When I try to replace the Text-content-md5 field of the file on the dump
Hi folks! On my lan I've:
server1
re0 - 192.168.1.250
xl0 - 192.168.2.250
default192.168.1.212 UGS 0 189re0
127.0.0.1 link#8 UH 0 18lo0
192.168.1.0/24 link#1 U 0 6145re0
192.168.1.250
On 2013-05-20 3:58 pm, Pol Hallen wrote:
Hi folks! On my lan I've:
server1
re0 - 192.168.1.250
xl0 - 192.168.2.250
default192.168.1.212 UGS 0 189re0
127.0.0.1 link#8 UH 0 18lo0
192.168.1.0/24 link#1 U
Try:
route add 192.168.1.0/24 192.168.2.250
does not run :-(
Pol
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
On 2013-05-20 4:19 pm, Pol Hallen wrote:
Try:
route add 192.168.1.0/24 192.168.2.250
does not run :-(
Pol
Interesting. I had a similar issue I got around with a similar route
addition, though I was going from a LAN PC through my server that was
running openvpn out to a remotely connected
If you don't mind could you post the output of ifconfig from both boxes?
server1:
re0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500
options=8209bRXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE
ether 70:71:bc:94:c3:6d
inet
On 2013-05-20 5:01 pm, Pol Hallen wrote:
If you don't mind could you post the output of ifconfig from both
boxes?
server1:
re0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu
1500
options=8209bRXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE
On Apr 17, 2013, at 10:04 AM, Lowell Gilbert
freebsd-questions-lo...@be-well.ilk.org wrote:
Paul Kraus p...@kraus-haus.org writes:
When building postfix under 91. I am running into an odd
problem. I use the INST_BASE option, which seems to cause the problem
(it worked fine with 9.0
Paul Kraus p...@kraus-haus.org writes:
That was exactly the problem. I knew it was in the
installation configuration *somewhere*, but I just could not find
it. Thanks.
Should I report this as a bug in the postfix port ?
No need. Looks like sahil@ has already fixed it.
Be well
LS,
What is going ewrong?
Problem : Creating user account
-bash-2.05b$ uname -a
FreeBSD us-syslog01.dcn.versatel.net 4.9-RELEASE-p10 FreeBSD
4.9-RELEASE-p10 #1: Thu Jun 24 10:04:37 GMT 2004
r...@syslog1.versatel.net:/usr/obj/usr/src/sys/SYSLOG i386
-bash-2.05b$
-bash-2.05b$ sudo adduser
Den 23.04.2013 13:17, skrev AMS_MDF_operations:
LS,
What is going ewrong?
Problem : Creating user account
-bash-2.05b$ uname -a
FreeBSD us-syslog01.dcn.versatel.net 4.9-RELEASE-p10 FreeBSD
4.9-RELEASE-p10 #1: Thu Jun 24 10:04:37 GMT 2004
r...@syslog1.versatel.net:/usr/obj/usr/src/sys/SYSLOG
Herbert J. Skuhra wrote:
Den 23.04.2013 13:17, skrev AMS_MDF_operations:
LS,
What is going ewrong?
Problem : Creating user account
-bash-2.05b$ uname -a
FreeBSD us-syslog01.dcn.versatel.net 4.9-RELEASE-p10 FreeBSD
4.9-RELEASE-p10 #1: Thu Jun 24 10:04:37 GMT 2004
r...@syslog1
On Tue, Apr 23, 2013 at 10:10 AM, Julian H. Stacey j...@berklix.com wrote:
Herbert J. Skuhra wrote:
Den 23.04.2013 13:17, skrev AMS_MDF_operations:
LS,
What is going ewrong?
Problem : Creating user account
-bash-2.05b$ uname -a
FreeBSD us-syslog01.dcn.versatel.net 4.9
Outback Dingo wrote:
On Tue, Apr 23, 2013 at 10:10 AM, Julian H. Stacey j...@berklix.com wrote:
Herbert J. Skuhra wrote:
Den 23.04.2013 13:17, skrev AMS_MDF_operations:
LS,
What is going ewrong?
Problem : Creating user account
-bash-2.05b$ uname -a
FreeBSD us
Paul Kraus p...@kraus-haus.org writes:
When building postfix under 91. I am running into an odd
problem. I use the INST_BASE option, which seems to cause the problem
(it worked fine with 9.0). The 'make' goes fine, but the 'make
install' fails when trying to install the startup script
When building postfix under 91. I am running into an odd problem. I use
the INST_BASE option, which seems to cause the problem (it worked fine with
9.0). The 'make' goes fine, but the 'make install' fails when trying to install
the startup script to /usr/etc/rc.d instead of /etc/rc.d
On Tue, 16 Apr 2013 17:16:20 -0400, Paul Kraus wrote:
When building postfix under 91. I am running into an odd problem. I use
the INST_BASE option, which seems to cause the problem (it worked fine
with 9.0). The 'make' goes fine, but the 'make install' fails when
trying to install the startup
it. Tracking down *what* file they want shouldn't be too much
effort. If it turns out to be, you can always update to something recent
enough to be supported, but that's probably unnecessary for this problem.
___
freebsd-questions@freebsd.org mailing list
I've got an older FreeBSD 6.1 install that will no longer allow me to build
any software distributions. Any time I try to do a 'configure', the
configure seems to run fine, then I get a config.status: error: cannot find
input file:. This has happened on several packages from several different
Hi all,
Hopefully someone here is much more clever than I am. I've run out of
ideas on how to cleanly convert this chunk of ksh to posix sh. This is
from a BB/Hobbit/Xymon monitoring script for ZFS. I'd really like to have
this working cleanly on FreeBSD without requiring any funky shells
I'd really like to
have this working cleanly on FreeBSD without requiring any funky shells
Define funky shell. Does it have to be straight up plain sh? Can it
use csh or tcsh syntax? Does bash count as 'funky'?
or using any temporary files.
Do you mean manually created temp files?
On Thu, 04 Apr 2013 07:47:09 -0500, Quartz qua...@sneakertech.com wrote:
I'd really like to
have this working cleanly on FreeBSD without requiring any funky shells
Define funky shell. Does it have to be straight up plain sh? Can it
use csh or tcsh syntax? Does bash count as 'funky'?
Any
fail on an unwritable
filesystem.
...By which I mean you can't create new files because your disk is
completely full or you're booting from a ramdisk that's messed up, etc.
__
it has a certain smooth-brained appeal
On 4/4/2013 3:32 μμ, Mark Felder wrote:
Hi all,
Hopefully someone here is much more clever than I am. I've run out of
ideas on how to cleanly convert this chunk of ksh to posix sh. This is
from a BB/Hobbit/Xymon monitoring script for ZFS. I'd really like to
have this working cleanly on FreeBSD
On Apr 4, 2013, at 5:32 AM, Mark Felder wrote:
Hi all,
Hopefully someone here is much more clever than I am. I've run out of ideas
on how to cleanly convert this chunk of ksh to posix sh.
/me takes the challenge (and shame on some of the current responses; this is
trivial in sh and
implementations — in particular Bash and ksh differ here. The standard
idiom for overcoming this problem is to use a here document:
IFS= read var EOF
$(foo)
EOF
I was having problems with the variables magically becoming empty,
remembered I had Rich's site bookmarked, checked to see
to throw them away anyhow.
— in particular Bash and ksh differ here. The standardidiom for overcoming
this problem is to use a here document:
IFS= read var EOF
$(foo)
EOF
But you're not processing a single line; you're processing the entire input
at-once and performing an action
Bash and ksh differ here. The standardidiom for overcoming
this problem is to use a here document:
IFS= read var EOF
$(foo)
EOF
But you're not processing a single line; you're processing the entire input
at-once and performing an action (writing to the screen) that also doesn't
care
-line tool and not a BB/Hobbit/Xymon module.
I actually will be using this with Xymon at work. I did fix the == and
style nit when I went over this script I'm still having a problem. When I
started debugging this last night $STRING led me to believe the pipe into
read wasn't working right
should go away since you're making a command-line
tool and not a BB/Hobbit/Xymon module.
I actually will be using this with Xymon at work. I did fix the == and style
nit when I went over this script I'm still having a problem.
No worries…
When I started debugging this last night $STRING led
On Thu, 04 Apr 2013 11:16:11 -0500, Teske, Devin
devin.te...@fisglobal.com wrote:
Here's what I suggest (the following works for me -- lists all my pools
and shows healthy):
Fantastic! I'd have never considered wrapping the entire thing into
STRING=$STRING$().
I can't tell you how much
On Tue, Mar 26, 2013 at 06:53:11AM -0500, Antonio Olivares typed:
Dear Sir,
As bapt@ hints: try rebuilding binutils without NLS.
--
--
I have binutils installed without NLS. I ran make deinstall reinstall
inside /usr/ports/devel/binutils/ and it deinstalls and it fails to
am not using pkgng just ports. On three machines I am successfull,
two 9.1-RELEASE-p1 and one 8.3-RELEASE, but this 9.1-RELEASE box I
could not build some ports, I tried deinstall/reinstall options, and
now I guess I am in a major problem, unless gettext starts to build
soon, I uninstalled glib20
I hope Matthew Seaman sees this:
All the files are of course present and correct in /usr/local/lib/
virtualbox
# pkg check -Ba
pkg: (virtualbox-ose-4.2.6) /usr/local/bin/VBoxAutostart - shared library
VBoxRT.so not found
pkg: (virtualbox-ose-4.2.6) /usr/local/bin/VBoxAutostart - shared library
On Tue, 26 Mar 2013 19:13:04 +, Walter Hurry wrote:
I hope Matthew Seaman sees this:
All the files are of course present and correct in /usr/local/lib/
virtualbox
snip code
Should have mentioned: This is pkg-1.0.9_2
___
On 26/03/2013 19:18, Walter Hurry wrote:
On Tue, 26 Mar 2013 19:13:04 +, Walter Hurry wrote:
I hope Matthew Seaman sees this:
All the files are of course present and correct in /usr/local/lib/
virtualbox
snip code
Should have mentioned: This is pkg-1.0.9_2
I see it. There
VBoxXPCOM.so not found
pkg: (virtualbox-ose-4.2.6) /usr/local/lib/virtualbox/VBoxXPCOMIPCD -
shared library VBoxRT.so not found
Still working on it...
Actually, fixed that problem and just pushed the commit to master...
worm:...matthew/src/pkgng:# pkg check -vB virtualbox-ose
Reanalyzing files
1 - 100 of 10446 matches
Mail list logo
