Hi,
First off, let me say it's been a very long time since I've had to deal
with a FreeBSD box panicing, so bear with me.
This particular machine has been acting up since I upgraded to 4.8-p18
from 4.8-p6(?). The only bit of odd hardware in it is a 3Ware IDE RAID
card (full dmesg below). This
Bruce Hunter wrote:
I have setup a headless machine via a null modem cable. Instalation went
fine. The only problem now, is connecting to the machine after the
install. When I #cu -l /dev/cuaao/
I see the boot process, but it gets to the date prompt but doesn't show
the login:
i did install
On Fri, May 07, 2004 at 05:01:29PM +0900, Rob wrote:
Funny, that I'm struggling with opposite problem: I do not get the
boot messages over the serial cable, but do get the login prompt,
which I do not understand :(.
You probably need to tell the kernel to use the serial console:
# echo '-h'
Strange: I was used to do upper case lower case conversion always like this
and it suddenly doesn't work anymore:
$ echo Z | tr [A-Z] [a-z]
ÿ
--
Chris Christoph P. U. Kukulies kuku_at_kukulies.org
___
[EMAIL PROTECTED] mailing list
On Fri, 2004-05-07 at 10:53:01 +0200, Christoph Kukulies proclaimed...
Strange: I was used to do upper case lower case conversion always like this
and it suddenly doesn't work anymore:
$ echo Z | tr [A-Z] [a-z]
Works fine for me. However, maybe this would help?
echo Z | tr [:upper:]
On Fri, May 07, 2004 at 10:53:01AM +0200, Christoph Kukulies wrote:
Strange: I was used to do upper case lower case conversion always like this
and it suddenly doesn't work anymore:
$ echo Z | tr [A-Z] [a-z]
ÿ
Something locale-related?
Kris
pgp0.pgp
Description: PGP signature
Did you find a solution for this problem ?
Greetings daniel
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hello,
Is there a way, on FreeBSD 4.9R, to trace the origin of outgoing DNS
queries? I mean, a determination which process is sending the queries?
Something ktrace like. De firewall, ipfw, cannot do it.
Thanks,
- Mark
___
[EMAIL PROTECTED] mailing
Hello!
Yesterday I wrote:
Earlier today, I wrote:
So, I'm trying to install 5.2.1 on IBM Netfinity 5000 and I'm not
having much luck. Before going into great technical detail (ha!) and
frustrating stories of my failures, I just thought to ask, is anyone
at all running this combination
On Monday 03 May 2004 08:26, Mikkel Christensen wrote:
On Friday 30 April 2004 07:58, Mikkel Christensen wrote:
On Thursday 29 April 2004 19:54, Mikkel Christensen wrote:
On Thursday 29 April 2004 18:20, Marty Landman wrote:
At 01:13 PM 4/29/2004, Mikkel Christensen wrote:
On
Stijn Hoop wrote:
On Fri, May 07, 2004 at 05:01:29PM +0900, Rob wrote:
Funny, that I'm struggling with opposite problem: I do not get the
boot messages over the serial cable, but do get the login prompt,
which I do not understand :(.
You probably need to tell the kernel to use the serial
On Fri, May 07, 2004 at 03:57:25AM -0500, [EMAIL PROTECTED] wrote:
On Fri, 2004-05-07 at 10:53:01 +0200, Christoph Kukulies proclaimed...
Strange: I was used to do upper case lower case conversion always like this
and it suddenly doesn't work anymore:
$ echo Z | tr [A-Z] [a-z]
Works
On Fri, May 07, 2004 at 01:59:01AM -0700, Kris Kennaway wrote:
On Fri, May 07, 2004 at 10:53:01AM +0200, Christoph Kukulies wrote:
Strange: I was used to do upper case lower case conversion always like this
and it suddenly doesn't work anymore:
$ echo Z | tr [A-Z] [a-z]
ÿ
Something
On Fri, May 07, 2004 at 08:06:37PM +0900, Rob wrote:
Stijn Hoop wrote:
On Fri, May 07, 2004 at 05:01:29PM +0900, Rob wrote:
Funny, that I'm struggling with opposite problem: I do not get the
boot messages over the serial cable, but do get the login prompt,
which I do not understand :(.
Hello, list.
Can anybody help me as I can really understand nothing.
The scenario:
there is two nets: 192.168.5.0/24 and 192.168.7.0/24.
All users normally sit in 192.168.5.0/24, using 192.168.7.0/24 as
VPN addresses.
All VPN users have access to squid, socks, mail, and pop3.
everithing works
For your telnet test to pcanywhere ports on target Lan pc to work
you have to tell telnet on the target to listen on those ports.
I believe pcanywhere is one of those applications that imbed the ip
address of the remote and host into the packet data and used by the
application to establish
Here's odd.
I'm trying to do a buildworld under 5.2.1-RELEASE-p5. src is fully up
to date. The buildworld fails as it enters the lib/libncurses subdir
during stage 2.1, cleaning up the object tree:
[---snip normal output---]
=== lib/libncurses
.depend, line 1: Need an operator
.depend, line 2:
On Thu, May 06, 2004 at 11:37:09PM -0500, adp wrote:
And I am allowing in accessing via ipf:
pass in quick proto tcp from any to public-ip port = 5631 group 200
pass in quick proto udp from any to public-ip port = 5631 group 200
pass in quick proto tcp from any to public-ip port = 5632 group
On Thu, May 06, 2004 at 11:58:43PM -0400, Bruce Hunter wrote:
I see the boot process, but it gets to the date prompt but doesn't show
the login:
this is mentioned in the fabulous handbook:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/serialconsole-setup.html
17.6.5.4 Getting a
Just recently I've started having a DNS issue of sorts on two of my
workstations running KDE 3.2 on Freebsd 4.9 and using both Mozilla and
Firebird for browsers. What happens is I'll be surfing around and suddenly
I'll hit something and I can't go forward, I can't go back, I can't go
Greg,
Thanks for the info. Could you tell me what is the best way to copy the
whole source codes to my machine, so it's easy for me to find and understand
in details some system functions?
Your help is much appreciated.
Best regards,
Thuan
- Original Message -
From: Greg 'groggy'
Hi,
Who do I contact to see if they can add a step to the UPDATING
document in ports to make sure/remind/etc people to use.perl port before
upgrading all the modules?
Thanks, Tuc/TTSG Internet Services, Inc.
___
[EMAIL
On Fri, May 07, 2004 at 10:13:14AM -0400, Tuc wrote:
Who do I contact to see if they can add a step to the UPDATING
document in ports to make sure/remind/etc people to use.perl port before
upgrading all the modules?
Try contacting the maintainer of the perl ports:
% cd
Hi,
Having a SCSI Geometry issue on a 5.2.1-RELEASE-p4 system. It has
a Symbios SDMS PCI SCSI, 53C1010-66 adapter that shows up as :
sym0: 1010-66 port 0xa000-0xa0ff mem 0xf600-0xf6001fff,0xf680-0xf68003
ff irq 25 at device 5.0 on pci1
sym0: Symbios NVRAM, ID 7, Fast-80, LVD,
In the last episode (May 07), Christoph P. Kukulies said:
On Fri, May 07, 2004 at 01:59:01AM -0700, Kris Kennaway wrote:
On Fri, May 07, 2004 at 10:53:01AM +0200, Christoph Kukulies wrote:
Strange: I was used to do upper case lower case conversion always like this
and it suddenly doesn't
I've got a Belkin KVM as well. After some playing around with it I did
finally get it going and working. In my rc.conf file I have moused port as
/dev/psm0 and my moused type as auto.
I did have problems getting my scroll wheel to work, it would only work
about half the time. I eventually
cc'ed to questions: let's move it there?
Geoffrey Lane wrote:
I'm fairly familiar with linux and have been running redhat for a few years
now. I'm looking for something I have more control over and isn't bloated
with alot of stuff I don't need...
BSD is on the top of my list, there are only a
hi,
i recently uninstalled almost all of my programs, cleaned out the cruft,
and re-installed only the programs i was actually using. +2Gb yay!
well, since reinstalling acroread, i'm having problems getting it to run.
i vaguely recall having the same issue, when i first installed the program
The full fdisk output is:
*** Working on device /dev/ad0 ***
parameters extracted from in-core disklabel are:
cylinders=4865 heads=255 sectors/track=63 (16065 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
Is there a Sparc64 (Ultra5) specific install instructions document?
ta,
Mike
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On Friday 07 May 2004 02:54 am, Daniel Wijnands wrote:
Did you find a solution for this problem ?
You didn't give enough information such as version of FreeBSD that you
are running. After I read your message, I tried building it again on 2
recently cvsup'ed different computers running
J. W. Ballantine wrote:
The full fdisk output is:
*** Working on device /dev/ad0 ***
parameters extracted from in-core disklabel are:
cylinders=4865 heads=255 sectors/track=63 (16065 blks/cyl)
[snip]
I take it that the partition sizees reported are correct?
It a Dell, but given the
I already have a good method for saving realaudio
streams to local files. No discussion of this is
necessary.
So now I have locally saved realaudio files, and I
would like to convert them to mp3 (or at least to wav,
and then to mp3). There is some lame GUI tool in
windows to do this, but of
On May 7, 2004, at 1:40 PM, Mark Ovens wrote:
J. W. Ballantine wrote:
It a Dell, but given the configuration, i do not believe it came
pre-installed from the factory.
I would have thought that a Dell would have had *an* OS pre-installed.
Not always. I am running FBSD 4.9 on a couple Dell 2650's
The last four lines are not even close:
fa eb 5c 53 42 4d 33 2e 37 2e 31 00 02 01 01 00 |..\SBM3.7.1.|
0010 02 e0 00 40 0b f0 09 00 12 00 02 00 00 00 00 00 |[EMAIL PROTECTED]|
0020 00 00 00 00 00 00 29 00 00 00 00 53 4d 41 52 54 |..)SMART|
0030 20 42 54
Mark Ovens wrote:
Not come across Smart Boot Manager but I wonder if it creates a small
partition to run from; the OS/2 Boot Manager, which was also shipped
with older versions of Partition Magic, did but, like recovery
partitions it didn't get a drive letter.
Ah! I've just thought of
Bart Silverstrim wrote:
On May 7, 2004, at 1:40 PM, Mark Ovens wrote:
J. W. Ballantine wrote:
It a Dell, but given the configuration, i do not believe it came
pre-installed from the factory.
I would have thought that a Dell would have had *an* OS pre-installed.
Not always. I am running FBSD
Only if it treats w2k different than 98 and XP. I've had the same
boot manager on dual boot machines with the two MS OSes and FreeBSD
and have no trouble mounting the ms partitions on FreeBSD.
Jim
-- In Response to your message -
Date: Fri, 07 May 2004 19:10:17 +0100
On May 7, 2004, at 2:12 PM, Mark Ovens wrote:
Bart Silverstrim wrote:
On May 7, 2004, at 1:40 PM, Mark Ovens wrote:
J. W. Ballantine wrote:
It a Dell, but given the configuration, i do not believe it came
pre-installed from the factory.
I would have thought that a Dell would have had *an* OS
Hi
I am trying to install mono on my freebsd box
and i have these error
mono... does not work on -CURRENT with garbage collection enabled
i am runing 5.2 Release i probe in one machine that have 4.9 and it install
well
what should ido to install it in my 5.2 if its possible
Osmany Guirola Cruz wrote:
Hi
I am trying to install mono on my freebsd box
and i have these error
mono... does not work on -CURRENT with garbage collection enabled
i am runing 5.2 Release i probe in one machine that have 4.9 and it install
well
what should ido to install it in my 5.2 if its
[EMAIL PROTECTED] writes:
acroread
/usr/local/Acrobat5/Reader/intellinux/bin/acroread: error while loading
shared libraries: libXt.so.6: cannot open shared object file: No such file
or directory
locate libXt.so.6
/usr/X11R6/lib/libXt.so.6
i have tried with and without the following
hi lowell,
problem already solved. it may have been confusing because my last
reply didn't follow the usual '' indent format. i had to cut and paste
the message from the website, because i never received a copy of the
message.
thanks for your offer to help.
cheers,
epi.
On 07 May 2004
Hello,
I've recently updated my Gnome packags to version 2.6 and since then, X
has failed to work when I start it as a non-root user. (It does work as
root)
I get a message about being unable to replace the log file.
Has anyone got any ideas on where I went wrong?
Thank you,
N.
Joe Schmoe wrote:
I already have a good method for saving realaudio
streams to local files. No discussion of this is
necessary.
So now I have locally saved realaudio files, and I
would like to convert them to mp3 (or at least to wav,
and then to mp3). There is some lame GUI tool in
On Friday 07 May 2004 16:25, Kevin D. Kinsey, DaleCo, S.P. wrote:
4) Can freebsd use a linux swap space?
Yes, anything can be used as swap space, but be sure to determine the correct
device file, or else you'll overwrite precious data.
If, for example, you have the Linux swap on the second
Oops, the script was stripped off by the mailing list software. I'll
post it inline now.
- cut here -
#!/bin/sh
# extraido de http://bulmalug.net/impresion.phtml?nIdNoticia=1744
# y modificado por mapelo [EMAIL PROTECTED]
# necesita mplayer y lame
#
Trying to install openoffice from ports tree cvsupped yesterday and failing.
I don't want to install from a package, as I get an icky mess between gtk 1
(which the openoffice package wants) and gtk 2 (which the latest gnome wants)
Suggestions?
FreeBSD 4.9-RELEASE, when I try to build, it stops
On Thu, 6 May 2004 10:36 pm, JJB wrote:
The official 4.10 schedule says 4.10 stable release was scheduled
for May 5.
The FTP sites still have RC2 and the 4.10 to-do list talks about
RC3.
Anybody from the release team care to comment on what is the holdup
and when 4.10 going to be updated to
Hello,
is there any hardware SCSI RAID controller that is fully supported in FreeBSD?
By fully supported I mean being able to monitor and talk to the controller
on a live system in order to initiate a rebuild on a replace drive and such.
Mylex/Adaptec seems to be a dead end, LSI's MegaRAIDs
On Friday, 7 May 2004 at 10:00:50 -0400, Thuan Truong wrote:
Greg,
Thanks for the info. Could you tell me what is the best way to copy the
whole source codes to my machine, so it's easy for me to find and understand
in details some system functions?
This is a FAQ. The source code is
How to get the best results from FreeBSD questions.
===
Last update $Date: 2003/03/09 22:09:31 $
This is a regular posting to the FreeBSD questions mailing list. If
you got it in answer to a message you sent, it means that the sender
thinks that
The trouble with books is that you can't update them the way you can a web page
or any other online documentation. The result is that most leading edge
computer books are out of date almost before they are printed. Unfortunately,
The Complete FreeBSD, published by O'Reilly, is no exception.
On Friday 07 May 2004 06:42, Henrik W Lund wrote:
malloc() is your friend! :-)
-- double *ncost = malloc(sizeof (double) * persons * scens); --
This ought to do the trick. Just remember to make sure that malloc
returns a valid pointer, otherwise you'll have another seg fault.
I'm
* Viktor Lazlo [EMAIL PROTECTED] [2004-05-06 21:22]:
On Thu, 6 May 2004, Joshua Lokken wrote:
Does anyone out there use a tool similar to plod for personal logging
of administrative tasks? I've looked through
/usr/ports/sysutils, and didn't see anything that caught my eye.
Why
On May 7, 2004, at 5:13 PM, Peter Schuller wrote:
Hello,
is there any hardware SCSI RAID controller that is fully supported in
FreeBSD?
By fully supported I mean being able to monitor and talk to the
controller
on a live system in order to initiate a rebuild on a replace drive and
such.
On Saturday 08 May 2004 00:24, Bill Moran wrote:
Trying to install openoffice from ports tree cvsupped yesterday and
failing. I don't want to install from a package, as I get an icky mess
between gtk 1 (which the openoffice package wants) and gtk 2 (which the
latest gnome wants)
Suggestions?
Christian Hiris wrote:
On Saturday 08 May 2004 00:24, Bill Moran wrote:
Trying to install openoffice from ports tree cvsupped yesterday and
failing. I don't want to install from a package, as I get an icky mess
between gtk 1 (which the openoffice package wants) and gtk 2 (which the
latest gnome
On May 7, 2004, at 7:13 PM, Peter Schuller wrote:
Hello,
is there any hardware SCSI RAID controller that is fully supported in
FreeBSD?
By fully supported I mean being able to monitor and talk to the
controller
on a live system in order to initiate a rebuild on a replace drive and
such.
Either Adaptec or AMI Logic
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On Saturday 08 May 2004 04:40, Bill Moran wrote:
Christian Hiris wrote:
On Saturday 08 May 2004 00:24, Bill Moran wrote:
Trying to install openoffice from ports tree cvsupped yesterday and
failing. I don't want to install from a package, as I get an icky mess
between gtk 1 (which the
I'm trying to install Penggy, so I can connect through
dialup using an AOL account I have. I'm running
FreeBSD 5.2.1. The modem I have is recognized in
FreeBSD. I downloaded the source file from the
homepage, then ran ./configure and said that it
couldn't find Guile (which I don't have installed).
On (05/05/04 10:18), Kent Stewart wrote:
From: Kent Stewart [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: Ports Index Update Error - mail/lmtpd Failure
Date: Wed, 5 May 2004 10:18:15 -0700
User-Agent: KMail/1.6.2
Cc: Joshua Lokken [EMAIL PROTECTED], Bob Perry [EMAIL PROTECTED]
On
63 matches
Mail list logo
