Re: [GNC-dev] Tax schedule report outputting entries outside of selected date range

Jeff, Thanks for the update. I'll keep fiddling with it but won't likely be able to solve it until I can reproduce the problem. Alex On Thu, Mar 23, 2023 at 10:01 PM Jeff wrote: > On 3/23/23 2:55 PM, Alex Aycinena wrote: > > Jeff, > > I cannot reproduce the problem and, sc

Re: [GNC-dev] Git branches

e though, but some names may give more of >> a hint than others. Some suggestions: >> >> >> >> * "current" vs "future" as shorthands for "current-release-series" or >> "future-release-series" >> >> * "maintenance&

Re: [GNC-dev] Tax schedule report outputting entries outside of selected date range

Jeff, I cannot reproduce the problem and, scanning the code, can't see a problem with the date handling. The account for which the out-of-date-range transaction is reported is of type 'Bank' and the assigned TXF code is '000, Tax Report Only - No TXF Export' When I set this up with my test

Re: [GNC-dev] Tax schedule report outputting entries outside of selected date range

that the change for this year is correct, and the ending balance is the amount to report for this year, once the verification process is complete. Thanks, Alex On Fri, Mar 17, 2023 at 2:21 AM Jeff wrote: > On 3/16/23 5:39 PM, Alex Aycinena wrote: > > >> >> -- Forwarded messa

Re: [GNC-dev] Tax schedule report outputting entries outside of selected date range

> > > > -- Forwarded message -- > From: Jeff > To: gnucash-devel > Cc: > Bcc: > Date: Thu, 16 Mar 2023 01:18:08 -0500 > Subject: [GNC-dev] [GNC] Tax schedule report outputting entries outside of > selected date range > I'm trying to generate a tax report (federal 1040) for entry

Re: [GNC-dev] Build failure

28, 2022 at 7:15 AM Robert Fewell <14ubo...@gmail.com> wrote: > Alex, > Just for info I updated my Fedora test VM to 37 and was able to do a clean > build. > > Regards, > Bob > > On Wed, 23 Nov 2022 at 20:06, Alex Aycinena > wrote: > >> Hello, >>

[GNC-dev] Build failure

Hello, I was doing a clean build with a new checkout on a Fedora 37 VM and received the following (this was after a partial build that resulted in the terminal window disappearing, so I couldn't see any messages; then I opened a new terminal window and started the build again):

Re: [GNC-dev] Git branches

Good point! You would have to change both or it would be too easy to make a mistake. Alex On Mon, Nov 14, 2022 at 11:59 AM john wrote: > > > On Nov 14, 2022, at 11:11 AM, Alex Aycinena > wrote: > > how about a simple change, like calling it 'main' rather than >

Re: [GNC-dev] Git branches

> > > > > -- Forwarded message -- > From: Derek Atkins > To: Geert Janssens > Cc: gnucash-devel > Bcc: > Date: Mon, 14 Nov 2022 11:26:02 -0500 > Subject: Re: [GNC-dev] Git branches > I have no objection to changing branch names. > > Just keep in mind that several build scripts

Re: [GNC-dev] Dev's features of choice?

> > > > -- Forwarded message -- > From: jean laroche > To: "Frank H. Ellenberger" > Cc: GnuCash Developer > Bcc: > Date: Sun, 26 Jul 2020 14:49:47 -0700 > Subject: Re: [GNC-dev] Dev's features of choice? > > > On 7/26/2020 1:54 PM, Frank H. Ellenberger wrote: > > Hi Jean, > > >

Re: [GNC-dev] book currency is what ... question mark

> > > > -- Forwarded message -- > From: John Ralls > To: Wm > Cc: gnucash-de...@lists.gnucash.org > Bcc: > Date: Mon, 11 Feb 2019 20:48:53 -0800 > Subject: Re: [GNC-dev] book currency is what ... question mark > > > > On Feb 11, 2019, at 6:49 PM, Wm via gnucash-devel < >

Re: [GNC-dev] tb, gnc or me? my trial balance is wrong and I think it is gnc not me

> > > -- Forwarded message -- > From: John Ralls > To: Adrien Monteleone > Cc: "gnucash-de...@lists.gnucash.org" > Bcc: > Date: Sun, 10 Feb 2019 08:54:03 -0800 > Subject: Re: [GNC-dev] tb, gnc or me? my trial balance is wrong and I > think it is gnc not me > The "Average Cost"

Re: [GNC-dev] gnucash maint: remove unnecesary 'home' level in path for US Income Tax book tax information

e out what is different > for me. > > > > Mike > > > >> On Jan 24, 2019, at 9:54 PM, J.Alex Aycinena < > alex.aycin...@code.gnucash.org> wrote: > >> > >> Updated via https://github.com/Gnucash/gnucash/commit/fc153643 > (com

Re: [GNC-dev] gnucash-devel Digest, Vol 190, Issue 31

> -- Forwarded message -- > From: Wm > To: gnucash-de...@lists.gnucash.org > Cc: > Bcc: > Date: Thu, 24 Jan 2019 17:37:30 + > Subject: Re: [GNC-dev] Alphavantage strategies > On 22/01/2019 15:16, John Ralls wrote: > > > Wm, > > > > F::Q has had a commit to add 6 seconds

Re: [GNC-dev] Tax Report Options: Payer Name Source Option

David, > > -- Forwarded message -- > From: "David T." > To: gnucash-devel > Cc: > Bcc: > Date: Mon, 21 Jan 2019 19:11:59 +0530 > Subject: [GNC-dev] Tax Report Options: Payer Name Source Option > Hello, > > On the Tax Report Options dialog, there is an option named “Payer Name >

Re: [GNC-dev] Bug # 796687

Geert, On Sun, Jan 6, 2019 at 9:17 AM Alex Aycinena wrote: > Geert, > > On Sun, Jan 6, 2019 at 8:11 AM Geert Janssens > wrote: > >> On Sunday, January 6, 2019 4:55:09 AM CET Alex Aycinena wrote: >> > Geert, >> > >> > I have been inve

Re: [GNC-dev] taxtxf

Christopher, > > -- Forwarded message -- > From: Christopher Lam > To: GnuCash development list > Cc: > Bcc: > Date: Fri, 4 Jan 2019 10:48:23 +0800 > Subject: [GNC-dev] taxtxf > Hi > > I'm thinking of tackling the huge beast that is taxtxf.scm but I'm > struggling to understand

Re: [GNC-dev] New Account Hierarchy Setup Assistant Questions

> > > -- Forwarded message -- > From: D > To: Adrien Monteleone , gnucash-devel < > gnucash-devel@gnucash.org> > Cc: > Bcc: > Date: Thu, 13 Sep 2018 08:41:33 -0400 > Subject: Re: Hello, > > Having raised yet another ruckus on the lists regarding documentation, I > will back off

Re: [GNC-dev] book-currency

On Mon, Jul 2, 2018 at 7:35 PM Christopher Lam wrote: > Hi Alex > Thank you for update - would you mind letting us know the layman version > of it? > Thanks! > > On 3 July 2018 at 01:02, Alex Aycinena wrote: > >> >>> -- Forwarded mes

Re: [GNC-dev] book-currency

> > > -- Forwarded message -- > From: John Ralls > To: Christopher Lam > Cc: gnucash-devel > Bcc: > Date: Sun, 1 Jul 2018 20:13:37 -0700 > Subject: Re: [GNC-dev] book-currency > If you’re sure it’s dead code, by all means. > > The volume of cruft often overwhelms the working

Re: Unstable terminates immediately

On Fri, Mar 2, 2018 at 6:21 AM, John Ralls <jra...@ceridwen.us> wrote: > > > > On Mar 2, 2018, at 4:03 AM, Geert Janssens <geert.gnuc...@kobaltwit.be> > wrote: > > > > Op vrijdag 2 maart 2018 02:21:45 CET schreef Alex Aycinena: > >> On Thu,

Re: Unstable terminates immediately

On Thu, Mar 1, 2018 at 5:15 PM, John Ralls wrote: > > > > Run it in the debugger and see where it’s crashing and why? > > Regards, > John Ralls > > Actually I tried that before sending the first e-mail and there was no crash and no backtrace. It simply exited during

Re: Unstable terminates immediately

Geert, Rebuilt after checking out unstable with same results. On Thu, Mar 1, 2018 at 12:02 PM, Geert Janssens wrote: > > > Other than not fully clearing your build directory I don't see any issues. > If > that doesn't fix it, you could > > 1. check if the gnucash

Re: Unstable terminates immediately

On Thu, Mar 1, 2018 at 8:51 AM, Alex Aycinena <alex.aycin...@gmail.com> wrote: > > > On Wed, Feb 28, 2018 at 12:58 PM, Geert Janssens < > geert.gnuc...@kobaltwit.be> wrote: > >> Alex, >> >> I can't reproduce this on Fedora 26 (64bit) not even after a

Re: Unstable terminates immediately

On Wed, Feb 28, 2018 at 12:58 PM, Geert Janssens wrote: > Alex, > > I can't reproduce this on Fedora 26 (64bit) not even after a clean rebuild. > Gnucash starts and runs just fine. > > What platform are you on again ? > Do you see anything in the build log ? An

Unstable terminates immediately

I just built unstable and in launching gnucash, it terminates immediately with the following trace file: * 10:01:36 INFO [main] System locale returned en_US.utf8 * 10:01:36 INFO [main] Effective locale set to en_US.utf8. * 10:01:36 INFO [gnc_load_app_icons] The icon theme search path has 10

Re: What version of txf export used in windows version 2.6.19

Jeffrey, I don't recall where I got it, but I will send a copy directly to your email when I can get to the machine that it is on. Regards, Alex On Fri, Feb 2, 2018 at 4:10 PM, jeffrey black <beastmaster...@hotmail.com> wrote: > On 1/30/2018 3:41 PM, Alex Aycin

Re: What version of txf export used in windows version 2.6.19

> -- Forwarded message -- > From: Jeffrey Black > To: gnucash-devel@gnucash.org > Cc: > Bcc: > Date: Sat, 27 Jan 2018 18:13:02 -0700 (MST) > Subject: What version of txf export used in windows version 2.6.19 > I tried importing my txf output file into H

Re: Problem building master with autotools

Geert, On Fri, Jul 21, 2017 at 1:52 AM, Geert Janssens <geert.gnuc...@kobaltwit.be> wrote: > Op woensdag 19 juli 2017 22:09:40 CEST schreef Alex Aycinena: > > On Tue, Jul 11, 2017 at 3:29 PM, Eric Theise <ericthe...@gmail.com> > wrote: > > > Hi everyone, > &g

Re: Source directory restructuring

> -- Forwarded message -- > From: Geert Janssens <geert.gnuc...@kobaltwit.be> > To: gnucash-devel <gnucash-devel@gnucash.org> > Cc: > Bcc: > Date: Wed, 16 Aug 2017 12:44:52 +0200 > Subject: Re: Source directory restructuring > On maandag 14 augus

Re: Source directory restructuring complete (Geert Janssens)

On Tue, Aug 15, 2017 at 1:23 PM, Alex Aycinena <alex.aycin...@gmail.com> wrote: > > > Hi Geert, > > I did a new clone with a parallel build directory in three Fedora's and > had mixed results: > > F24 - with cmake/ninja: clean ninja-build, ninja-build check, nin

Re: Source directory restructuring complete (Geert Janssens)

> > > -- Forwarded message -- > From: Geert Janssens > To: gnucash-devel@gnucash.org > Cc: > Bcc: > Date: Tue, 15 Aug 2017 16:54:23 +0200 > Subject: Re: Source directory restructuring complete > Hmm, > > And I meant to add, can you post the contents of

Re: Source directory restructuring

On Sun, Aug 13, 2017 at 3:52 AM, Geert Janssens <geert.gnuc...@kobaltwit.be> wrote: > On zondag 13 augustus 2017 01:34:34 CEST Alex Aycinena wrote: > > John, > > > > I did a test-by-test comparison and found the following: > > > > in cmake but not exactly t

Re: Source directory restructuring

> > > On Wed, Aug 9, 2017 at 11:54 AM, John Ralls <jra...@ceridwen.fremont.ca.us > > wrote: > >> >> > On Aug 9, 2017, at 9:16 PM, Alex Aycinena <alex.aycin...@gmail.com> >> wrote: >> > >> >> >> >>

Re: Source directory restructuring

> > > > -- Forwarded message -- > From: John Ralls > To: Sumit Bhardwaj > Cc: gnucash-devel > Bcc: > Date: Tue, 8 Aug 2017 20:01:44 +0300 > Subject: Re: Source directory restructuring > > > On Aug 8,

Compile error on clean build on Fedora 26

On a new clean clone on a Fedora 26 VM, with the following configure: ../gnucash-clean/configure --srcdir=/home/gnucash-dev/gitcheckouts/gnucash-clean --prefix=/opt/gnucash-git/gnucash-clean I get the following error on make: In file included from

Re: Problem building master with autotools

On Tue, Jul 11, 2017 at 3:29 PM, Eric Theise wrote: > Hi everyone, > > I seem to be having the same problem as Alex. It's my first time trying to > do a local build. I'm using an up-to-date Ubuntu 16.04 virtual machine. > > Eric > > ... > make[4]: Leaving directory

Re: gnucash master: Book-Currency Feature step 6

Fix subject on email On Sun, Jul 16, 2017 at 6:49 PM, Alex Aycinena <alex.aycin...@gmail.com> wrote: > John, > > > >> -- Forwarded message -- >> From: John Ralls <jra...@ceridwen.us> >> To: Robert Fewell <14ubo...@gmail.com> &

Re: gnucash-devel Digest, Vol 172, Issue 15

John, > -- Forwarded message -- > From: John Ralls > To: Robert Fewell <14ubo...@gmail.com> > Cc: Geert Janssens , " > gnucash-devel@gnucash.org" > Bcc: > Date: Sat, 15 Jul 2017 13:59:32 -0700 >

Re: gnucash master: Book-Currency Feature step 6

Bob, > -- Forwarded message -- > From: Robert Fewell <14ubo...@gmail.com> > To: Geert Janssens > Cc: "gnucash-devel@gnucash.org" > Bcc: > Date: Sat, 15 Jul 2017 18:18:25 +0100 > Subject: Re: gnucash master: Book-Currency

Re: Problem building master with autotools

Geert, > Odd I don't get this on my system (Fedora 25 as well). > > The linker is having issues resolving "__gxx_personality_v0". The internet > cites two common issues for this: > - either a library is missing > - or the sequence of libraries on the command line is wrong (a symbol to > resolve

Re: Problem building master with autotools

John, > > -- Forwarded message -- > From: John Ralls <jra...@ceridwen.us> > To: Geert Janssens <geert.gnuc...@kobaltwit.be> > Cc: gnucash-devel@gnucash.org, Alex Aycinena <alex.aycin...@gmail.com> > Bcc: > Date: Tue, 11 Jul 2017 06:57:5

Re: Problem building master with autotools

Sumit, > > -- Forwarded message -- > From: Sumit Bhardwaj <bhardw...@gmail.com> > To: Alex Aycinena <alex.aycin...@gmail.com> > Cc: gnucash-devel <gnucash-devel@gnucash.org> > Bcc: > Date: Mon, 10 Jul 2017 20:04:00 -0700 > Subject: Re: Pro

Re: build after last update

Geert, > -- Forwarded message -- > From: Geert Janssens <geert.gnuc...@kobaltwit.be> > To: Alex Aycinena <alex.aycin...@gmail.com> > Cc: gnucash-devel <gnucash-devel@gnucash.org> > Bcc: > Date: Mon, 10 Jul 2017 23:01:22 +0200 > Subject: Re

Re: Problem building master with autotools

report. Thanks, Sumit On Mon, Jul 10, 2017 at 6:38 PM, Alex Aycinena <alex.aycin...@gmail.com> wrote: > With a fresh checkout of master, I try to build with the autotools but I > get an error in linking test-import-pending-matches with test-engine-stuff > during make as follows:

Problem building master with autotools

With a fresh checkout of master, I try to build with the autotools but I get an error in linking test-import-pending-matches with test-engine-stuff during make as follows: /usr/bin/ld: ../../../src/engine/test-core/.libs/libgncmod-test-engine.a(test-engine-stuff.o): undefined reference to symbol

Re: build after last update

> -- Forwarded message -- > From: Geert Janssens <geert.gnuc...@kobaltwit.be> > To: Alex Aycinena <alex.aycin...@gmail.com> > Cc: gnucash-devel <gnucash-devel@gnucash.org>, John Ralls < > jra...@ceridwen.us> > Bcc: > Date: Mon, 10 Jul 2

Re: gnucash master: Book-Currency Feature step 6

> > -- Forwarded message -- > From: Geert Janssens > To: gnucash-devel@gnucash.org > Cc: > Bcc: > Date: Mon, 10 Jul 2017 15:45:57 +0200 > Subject: Re: gnucash master: Book-Currency Feature step 6 > Alex, > > This commit has broken make check on travis:

Re: build after last update

On Sun, Jul 9, 2017 at 1:28 PM, Alex Aycinena <alex.aycin...@gmail.com> wrote: > > > On Sun, Jul 9, 2017 at 8:31 AM, Alex Aycinena <alex.aycin...@gmail.com> > wrote: > >> >> >> On Sun, Jul 9, 2017 at 3:51 AM, Geert Janssens < >> geert.gnuc...

Re: build after last update

On Sun, Jul 9, 2017 at 8:31 AM, Alex Aycinena <alex.aycin...@gmail.com> wrote: > > > On Sun, Jul 9, 2017 at 3:51 AM, Geert Janssens <geert.gnuc...@kobaltwit.be > > wrote: > >> I had the same issue here and I've just pushed a fix. >> >> It turns out

Re: build after last update

I don't have a > system handy to test whether it works with 3.1-3.4 as well. > > Can you test this John ? > > Geert > > On zondag 9 juli 2017 04:50:54 CEST John Ralls wrote: > > > On Jul 8, 2017, at 5:38 PM, Alex Aycinena <alex.aycin...@gmail.com> > wrote: &g

build after last update

After the last update, my Fedora 25 system won't build with the following output: [gnucash-dev@HPdv5Fedora gnucash-working-build]$ make -- Checking for modules 'OPTIONAL;webkit2gtk-4.0' -- No package 'OPTIONAL' found -- No package 'webkit2gtk-4.0' found -- Checking for module 'webkit2gtk-3.0'

Re: building master

> -- Forwarded message -- > From: John Ralls <jra...@ceridwen.us> > To: Alex Aycinena <alex.aycin...@gmail.com> > Cc: gnucash-devel <gnucash-devel@gnucash.org> > Bcc: > Date: Sat, 22 Apr 2017 16:48:05 -0700 > Subject: Re: building master

Re: building master

> > -- Forwarded message -- > From: Geert Janssens > To: gnucash-devel@gnucash.org, Wm > Cc: > Bcc: > Date: Sat, 22 Apr 2017 14:40:56 +0200 > Subject: Re: building master > On vrijdag 21 april 2017 23:17:31 CEST Wm via

building master

Hi, I have been unable to spend any time on gnucash for several weeks but am about to get started again. I checked out master anew but when I tried to build it, I get: /usr/bin/ld: ../../../src/engine/test-core/.libs/libgncmod-test-engine.a(test-engine-stuff.o): undefined reference to symbol

Re: Gnucash bitcoin donations: I'd like to disable this bitcoin address

> > -- Forwarded message -- > From: John Ralls > To: Christian Stimming > Cc: gnucash-devel > Bcc: > Date: Sat, 8 Apr 2017 13:57:31 -0700 > Subject: Re: Gnucash bitcoin donations: I'd like to disable this

Re: gnucash master: Multiple changes pushed

On Thu, Feb 2, 2017 at 11:09 PM, Geert Janssens <geert.gnuc...@kobaltwit.be> wrote: > Op donderdag 2 februari 2017 16:35:02 CET schreef Alex Aycinena: > > Geert, > > > > I build on Fedora 25 and after this commit configure fails with: > > > > checking for

Re: gnucash master: Multiple changes pushed

On Thu, Feb 2, 2017 at 10:03 AM, Geert Janssens wrote: > Updated via https://github.com/Gnucash/gnucash/commit/659c96eb (commit) > via https://github.com/Gnucash/gnucash/commit/4fdacb9b (commit) > via

Re: Recommended Change to Author LIsting in Documentation

> > > -- Forwarded message -- > From: Geert Janssens > To: gnucash-devel@gnucash.org, "David T." > Cc: > Date: Sat, 10 Dec 2016 22:48:48 +0100 > Subject: Re: Recommended Change to Author LIsting in Documentation > Op zaterdag 10

Re: compile errors

On Sat, Nov 19, 2016 at 10:09 AM, John Ralls <jra...@ceridwen.us> wrote: > > > On Nov 19, 2016, at 9:34 AM, Alex Aycinena <alex.aycin...@gmail.com> > wrote: > > > > > > > > On Fri, Nov 18, 2016 at 4:50 PM, John Ralls <jra...@ceridwen.us> wr

Re: compile errors

On Fri, Nov 18, 2016 at 4:50 PM, John Ralls <jra...@ceridwen.us> wrote: > > > On Nov 18, 2016, at 2:49 PM, John Ralls <jra...@ceridwen.us> wrote: > > > > > >> On Nov 18, 2016, at 12:53 PM, Alex Aycinena <alex.aycin...@gmail.com> > wrote: > &

Re: compile errors

On Thu, Nov 17, 2016 at 5:10 PM, John Ralls <jra...@ceridwen.us> wrote: > > > On Nov 17, 2016, at 4:54 PM, Alex Aycinena <alex.aycin...@gmail.com> > wrote: > > > > Hi, > > > > I get the following compile errors today: > > > > > >

Re: ROOT Type accounts

> > > > -- Forwarded message -- > From: Geert Janssens > To: "David T." > Cc: gnucash-devel@gnucash.org > Date: Sat, 29 Oct 2016 14:54:35 +0200 > Subject: Re: ROOT Type accounts > On Saturday 29 October 2016 17:33:40 David T.

Re: Backport proposal for "Attached file indicator"

> > > -- Forwarded message -- > From: John Ralls > To: Derek Atkins > Cc: gnucash-devel@gnucash.org > Date: Tue, 13 Sep 2016 08:19:45 -0700 > Subject: Re: Backport proposal for "Attached file indicator" > > > On Sep 13, 2016, at 7:37 AM, Derek

Re: Lots in Account screen : Value sign

> > -- Forwarded message -- > From: Linas Vepstas > To: "Frank H. Ellenberger" , Geert > Janssens > Cc: GNUCASH devel > Date: Wed, 24 Aug 2016 23:12:54 -0500 > Subject:

Re: New Account Dialog

On Wed, Jul 27, 2016 at 9:00 AM, wrote: > > From: "David T." > To: GnuCash-Devel > Cc: > Date: Wed, 27 Jul 2016 11:25:11 +0500 > Subject: New Account Dialog > Hello, > > In recent weeks, there have been a number

Re: gnucash-devel Digest, Vol 159, Issue 12

John, > -- Forwarded message -- > From: John Ralls > To: Christian Stimming > Cc: gnucash-devel@gnucash.org > Date: Sun, 19 Jun 2016 15:15:22 -0700 > Subject: Re: Transaction Posted Time > > > On Jun 19, 2016, at 1:07 PM, Christian

Warnings on exit with latest master build

I just wanted to report that when I run the latest master build from the command line, on exiting gnucash, I get the following message on the terminal: sys:1: Warning: g_ascii_strcasecmp: assertion 's1 != NULL' failed Also, in gnucash.trace, the following messages are also shown, again at the

Re: make-check fails if not installed

On Wed, Jun 8, 2016 at 5:39 PM, John Ralls <jra...@ceridwen.us> wrote: > > > On Jun 8, 2016, at 3:34 PM, Alex Aycinena <alex.aycin...@gmail.com> > wrote: > > > > On a new clone on master, make-check fails on its first run (before being > > installed) b

make-check fails if not installed

On a new clone on master, make-check fails on its first run (before being installed) but succeeds after the application has been installed in its install directory. This is because the guile symbol 'qof_backend_register_provider' is being looked for in three instances in the install directory

make clean fails

Hello, I updated my clean gnucash master today and recompliled on Fedora 23. 'make clean' failed with: GnuCash 2.6.99: src/engine/test/test-suite.log # TOTAL: 28 # PASS: 25 # SKIP: 0 #

Re: Tax Sched report duplicates accounts

> > > -- Forwarded message -- > From: Ted Creedon > To: "gnucash-devel@gnucash.org" > Cc: > Date: Mon, 8 Feb 2016 19:12:54 + > Subject: Tax Sched reoprt duplicates accounts > Depending on the General tab settings the report

Re: Make fails

On Thu, Dec 3, 2015 at 11:41 AM, Alex Aycinena <alex.aycin...@gmail.com> wrote: > On Wed, Dec 2, 2015 at 5:27 PM, John Ralls <jra...@ceridwen.us> wrote: > >> >> Alex, >> >> Of course it’s supposed to work! Now it does, though I’m not comfo

Re: Make fails

On Wed, Dec 2, 2015 at 5:27 PM, John Ralls wrote: > > Alex, > > Of course it’s supposed to work! Now it does, though I’m not comfortable > with the fix. Moving the include of kvp_frame.hpp to the top of the list > implies that there’s something about one of the other headers

Re: Make fails

On Thu, Dec 3, 2015 at 11:54 AM, John Ralls wrote: > > > > Alex, > > Yeah, the segfault is the same one Geert reported. > > I don’t see the problem with test-pricedb in Debian stable, so I’m trying > F21. In the meantime can you run it under gdb and get a stack trace of the >

Re: Make fails

John, When I put a breakpoint on /gnc-pricedb-xml-v2.cpp:445 and ran the test, it stopped at the break and then I continued several times before the following: Breakpoint 1, gnc_price_to_dom_tree (tag=0x4574ce "price", price=0x695590) at

Re: Make fails

John, Your last commit fixed the failure related to test-xml-pricedb. So make worked and make check almost worked. At the end I go the following, 3 odd failures: PASS: test-load-module echo '/home/gnucash-dev/gitcheckouts/gnucash-clean-build/gnc-guile --debug -l

Make fails

Make fails on Fedora 22 on the latest master with the following error: /home/gnucash-dev/gitcheckouts/gnucash-clean/src/backend/xml/gnc-backend-xml.cpp: In function 'gboolean gnc_xml_be_get_file_lock(FileBackend*)':

Re: Make fails

John, On Tue, Dec 1, 2015 at 4:55 PM, John Ralls wrote: > > Thanks, Alex. Fixed and pushed along with a configure change to keep > libdbi-0.9’s deprecation warnings from stopping a build. > > Regards, > John Ralls > > Make now works, but make check fails with: In file

Re: gnucash master: Multiple changes pushed

Geert, I get this make failure on this change: /home/gnucash-dev/gitcheckouts/gnucash-clean/src/gnome/gnc-plugin-page-register.c: In function 'gnc_plugin_page_register_get_query': /home/gnucash-dev/gitcheckouts/gnucash-clean/src/gnome/gnc-plugin-page-register.c:1817:443: error: 'return' with no

make error

I get the following error on make with this mornings update: /home/gnucash-dev/gitcheckouts/gnucash-clean/src/gnome/dialog-commodities.c: In function 'remove_clicked': /home/gnucash-dev/gitcheckouts/gnucash-clean/src/gnome/dialog-commodities.c:200:19: error: 'prices' may be used uninitialized in

Re: Your email...

John, On Mon, Aug 10, 2015 at 12:03 AM, John Ralls jra...@ceridwen.us wrote: On Aug 10, 2015, at 3:55 AM, Alex Aycinena alex.aycin...@gmail.com wrote: Liz, On Sun, Aug 9, 2015 at 7:06 PM, Liz ed...@billiau.net wrote: Alex, your email address is often getting picked up

Re: Feature KVPs

John, That was too simple for me to see. It works correctly now. Thanks, Alex On Wed, Jul 22, 2015 at 9:21 AM, John Ralls jra...@ceridwen.us wrote: On Jul 21, 2015, at 12:09 PM, Alex Aycinena alex.aycin...@gmail.com wrote: John, I was wondering if you could help me figure out

Feature KVPs

John, I was wondering if you could help me figure out a problem I've noted in saving Feature KVPs. In the work I'm doing, I'm setting a feature related to the use of book-currency. This is the way it is currently saved (along with another feature) in the xml file: book:slots slot

Re: seg fault on master

John, On Thu, Jul 9, 2015 at 9:19 AM, John Ralls jra...@ceridwen.us wrote: On Jul 6, 2015, at 5:41 PM, John Ralls jra...@ceridwen.us wrote: On Jul 6, 2015, at 5:08 PM, Alex Aycinena alex.aycin...@gmail.com wrote: John, On Mon, Jul 6, 2015 at 2:02 PM, John Ralls jra

Re: seg fault on master

John, On Mon, Jul 6, 2015 at 2:02 PM, John Ralls jra...@ceridwen.us wrote: Alex, Well, that was the wrong cause. The real one was that I didn’t delete the option slots the right way. That helped me notice that KvpFrameImpl needed a proper destructor. Both committed, book options work

make check fails

On Fedora 21 make check fails with latest pull on master with: make[6]: Entering directory '/home/gnucash-dev/gitcheckouts/gnucash-clean-build/src/optional/python-bindings/tests' rm -f runTests.py.tmp sed /home/gnucash-dev/gitcheckouts/gnucash-clean/src/optional/python-bindings/tests/

seg fault on master

When I try to open a file on the latest master I get a seg fault. Following is the bt: Program received signal SIGSEGV, Segmentation fault. 0x7325b86e in boost::variantlong, double, _gnc_numeric, char const*, _gncGuid*, timespec64, _GList*, KvpFrameImpl*, _GDate,

Re: seg fault on master

John, On Sun, Jul 5, 2015 at 4:17 PM, John Ralls jra...@ceridwen.us wrote: On Jul 5, 2015, at 1:28 PM, Alex Aycinena alex.aycin...@gmail.com wrote: When I try to open a file on the latest master I get a seg fault. Following is the bt: #5 0x7325a3f6 in KvpValueImpl

Re: seg fault on master

John, On Sun, Jul 5, 2015 at 4:17 PM, John Ralls jra...@ceridwen.us wrote: On Jul 5, 2015, at 1:28 PM, Alex Aycinena alex.aycin...@gmail.com wrote: When I try to open a file on the latest master I get a seg fault. Following is the bt: #5 0x7325a3f6 in KvpValueImpl

Re: make fails on master

confirm that it all now works as it should on both F21 and F22. Thanks, Alex On Thu, Jun 18, 2015 at 3:05 PM, John Ralls jra...@ceridwen.us wrote: On Jun 17, 2015, at 5:42 PM, John Ralls jra...@ceridwen.us wrote: On Jun 17, 2015, at 4:03 PM, Alex Aycinena alex.aycin...@gmail.com wrote

Re: make fails on master

on the F22 machine. Should that be changed on master, and, if so, will you do it? Or would you like me to do it? Thanks, Alex On Wed, Jun 17, 2015 at 3:22 PM, Alex Aycinena alex.aycin...@gmail.com wrote: John, The config.log for the F21 system that builds properly does show CFLAGS as -std

Re: make fails on master

John, The config.log for the F21 system that builds properly does show CFLAGS as -std=gnu99, but the config.log for the F22 system that doesn't build, shows CFLAGS as -std=c11. I checked to make sure the configure.ac file on the F22 does have the 'ac_cv_cstd=gnu99' line that you had previously

Re: make fails on master

John, On Sun, Jun 7, 2015 at 1:34 PM, John Ralls jra...@ceridwen.us wrote: On Jun 7, 2015, at 12:38 PM, Derek Atkins de...@ihtfp.com wrote: On Sun, June 7, 2015 3:02 pm, John Ralls wrote: Alex, Turns out that for some flavors of GCC -std=gnu99 is required for strdup to be

Re: make fails on master

John, Thanks. I can confirm that both make and make-clean now work on both F20 F21. Regards, Alex On Sun, Jun 7, 2015 at 12:38 PM, Derek Atkins de...@ihtfp.com wrote: On Sun, June 7, 2015 3:02 pm, John Ralls wrote: Alex, Turns out that for some flavors of GCC -std=gnu99 is required

make fails on master

Hello, I've been away for a couple of weeks and upon return, pulled many changes on the master branch. Make fails with: /home/gnucash-dev/gitcheckouts/gnucash-clean/src/app-utils/gfec.c: In function 'gfec_catcher': /home/gnucash-dev/gitcheckouts/gnucash-clean/src/app-utils/gfec.c:60:9: error:

Re: Gnucash fails to start after recent update

John, On Mon, May 4, 2015 at 3:59 PM, John Ralls jra...@ceridwen.us wrote: On May 4, 2015, at 3:48 PM, John Ralls jra...@ceridwen.us wrote: Alex, Good hint, thanks. I tried on my F21 VM and it wouldn’t build at all: It crashed in guild. Odd, since it doesn’t throw on Debian Jessie with

Re: Gnucash fails to start after recent update

On Mon, May 4, 2015 at 2:45 PM, Alex Aycinena alex.aycin...@gmail.com wrote: snip Bob, I believe it was John's recent commit related to boost-date. On my Fedora 21 system, make doesn't work with a similar message: snip On my Fedora 20 system, make worked but make check failed. I

Re: Gnucash fails to start after recent update

-- Forwarded message -- From: Robert Fewell 14ubo...@gmail.com To: gnucash-devel@gnucash.org gnucash-devel@gnucash.org Cc: Date: Mon, 4 May 2015 09:11:56 +0100 Subject: Gnucash fails to start after recent update Hi guy's, I have just updated my git tree to the latest

Re: Build failure with dbi enabled

Geert, -- Forwarded message -- From: Geert Janssens geert.gnuc...@kobaltwit.be To: gnucash-devel@gnucash.org Cc: Date: Fri, 24 Apr 2015 17:54:02 +0200 Subject: Re: Build failure with dbi enabled On Friday 24 April 2015 07:31:02 John Ralls wrote: On Apr 24, 2015, at 6:36

  1   2   3   >