Il 19:47, sabato 08 settembre 2001, hai scritto:
[CUT]
Giusto, entro certi limiti. Ad esempio, ogni tanto uso un floppy che
e` formattato ext2, e il supermount non lo monta, perche` si aspetta
un floppy fat.. Inoltre, da quando ho ricompilato il kernel, il
supermount ha smesso completamente
Io ho un problema simile, con i driver Nvidia installati non vado oltre gli
800*600 (mandrake 8.0 con kernel 2.4.7).
As.C.I.I.
-Messaggio originale-
Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]Per conto di
brain
Inviato: giovedì 6 settembre 2001 19.50
A: [EMAIL PROTECTED]
hi, have you installed the nfs rpm packages?
something like nfs-utils or somesuch,
then you can use the command exportfs to serve an nfs volume:
#exportfs /path/to/export machine:domain
or something similar
this is all from memory as i haven't done this for ages so caveats apply, i
know you
civileme wrote:
Hmmm, well the 630/730 is supposed to be commonly supported by SiS GPL
drivers, but not generally on notebooks where the manufacturer has to do some
special dodges just to get things to work (then writes special drivers for
windows).
I wish I had a place I could direct you
try installined with rpm -Uvh rpm name
if i remember that does Update, verify, h...
--nathan
From: Mohammed Arafa [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: Mandrake Newbie [EMAIL PROTECTED]
Subject: [newbie] rpmdrake: rpm installed error
Date: Sat, 8 Sep 2001 15:55:29 +0200
whenever i
On Saturday 08 September 2001 14:55 pm, Mohammed Arafa wrote:
whenever i try to install an rpm ..software manager (rpmdrake) tells me
that the install generated errors: program already installed
but this is the first time i install the program (not part of the
distribution and/or update).
i
Not so dumb. If your Linux box is your only PC in the house, it won't do
much. It might increase your web-browsing when viewing the same sites many
times, but that's probably it. Notice I said it Might. Primarily, it is
intended for use on a server/PC which is used as a gateway for multiple
about a million people are going to tell you (and they are correct) that the
GIMP is every bit as good as photoshop, and they do not have the US gov. put
people in jail for talking about how poor their encryption is under the DMCA.
you might also consider that while dreamweaver sites appear
On Friday 07 September 2001 12:43 pm, Anders Thoresson escribió:
Hi,
I would like to put Windows (either Win2k och Win98) on a harddrive
together with Mandrake 8.0. I've got a 20 GB drive, at the moment
empty. Should I install Windows or Mandrake first to get a bootloader
that let me
On Friday 07 September 2001 08:19 pm, Siavash Sefidvash wrote:
Hi again, I just booted into windows and saw my NIC is listed as 3COM
Etherlink III ISA 3C509B-Combo. Apologies for lack of observance on my
part. S now, can anyone tell me if this NIC is supported by Mandrake 8
and if so,
under the services to start both anacron and crond are setup to start on
bootup. Are both of these services needed? Also what exactly is
I am not sure if both are needed. The crond should be the vixie-cron, since
that is more common on Linux systems (it is a version authored by Paul
Vixie,
thanks, forgot about that there should be a rpm for that stinkin thing... :)
installed it...
now... where do i tell the kernel to load it?
i put it in rc.sysinit
/etc/init.d/portmap start
/etc/init.d/nfslock start
portmap started fine... nfs locks the machine and gets some stupid error?
gee,, I had always guessed th parport stuff refered to a parralle port (also
known as printer port. what does (in a text console,without the quotes) cat
/proc/pci say?
On Friday 07 September 2001 23:10, you had thoughts to the concept of:
The network cards are not next to my video card.
On Saturday 08 September 2001 11:56, richied wrote:
On September 8, 2001 09:42 am, Siavash Sefidvash wrote:
Apologies for sounding naive, but is not fair to get paid for your
efforts.?
...There's actually a bigger issue at stake. Win XP is actually taking a
fingerpint of your system.
On Saturday 08 September 2001 04:40 am, s escribió:
On Friday 07 September 2001 05:09 pm, Tom Brinkman wrote:
I've got one word for nVidia's Linux support, and like most in
the wintel-gang, it's DISINGENUOUS. They're just stringin us
along, with poor, partially capable, closed
On Sat, 8 Sep 2001 12:58:30 -0400, jennifer [EMAIL PROTECTED] wrote:
On Saturday 08 September 2001 11:56, richied wrote:
On September 8, 2001 09:42 am, Siavash Sefidvash wrote:
Apologies for sounding naive, but is not fair to get paid for your
efforts.?
...There's actually a bigger
On Saturday 08 September 2001 06:49 pm, Joan Tur escribió:
Es Divendres 07 Setembre 2001 14:03, en Jeremy Davidson va escriure:
I have an IBM Deskstar 75GXP 30GB drive which is ATA100 compatible,
but I have a feeling that MDK8.0 is not taking full advantage of
this feature. My motherboard,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Running Mandrake 8.0 with KDE 2.1.1 and Konqueror 2.1.1 and Kmail 1.2
(all standard with the M8.0 power relase)
When I click in a URL in an email on kmail, it starts Konqueror to
view the URL.
1) I want to use Netscape or Opera as my default
from what i understand they removed this a while back...
or at least the version used to make OEM systems doesnt have that stupid
reg'd thing (actually includes a cd code).
-- nathan
From: jennifer [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED], richied [EMAIL PROTECTED]
Original Message
Subject: [Alsa-user] [OT] Announcement: new Linux-Audio-User mailing list
Date: Sat, 08 Sep 2001 19:31:57 +0200
From: Jörn Nettingsmeier [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED],
[EMAIL PROTECTED],[EMAIL PROTECTED],
[EMAIL
On Saturday 08 September 2001 12:57 pm, Sridhar Dhanapalan escribió:
Take a look at this article:
http://www.zdnet.com/zdnn/stories/comment/0,5859,2810195,00.html
Here's an excerpt:
For those who haven't yet experienced it, the new scheme is
concealed under the 'Product Activation'
Hi there,
as usual when I see a problem on my Linux box, I wonder if I am stupid or if
there is a bug. Fortunately, I'm stupid more than often. But I was trying to
use tar yesterday to do a backup of my /home rep. for files which are newer
than August 29 2001. So I issued the following
Maybe a dumb question, but...
(Apart from using a Linux box as your home network gateway) what do you use
a proxy server for on the same machine as you access the net?
Cheers, Rod.
At 13:23 04/09/2001 -0400, Arthur H. Johnson II wrote:
Squid is great. http://www.squid-proxy.org. Mandrake
Apologies for sounding naive, but is not fair to get paid for your efforts.?
If not Zhiang Zemin and Chinese polit bureaux would really like to hire
you...that part of the world is Mecca for this sort of thing. I don't mind
paying £100 for a developers application.
However I realize that's
this is ISA? reserved a irq? set the jumpers or use the software that came
with the card to setup pnp to no
On Friday 07 September 2001 21:19, Siavash Sefidvash wrote:
Hi again, I just booted into windows and saw my NIC is listed as 3COM
Etherlink III ISA 3C509B-Combo. Apologies for lack of
On Sat, 8 Sep 2001 05:16:11 -0500, Sher [EMAIL PROTECTED] wrote:
Dear friends:
Using dual-boot LM 8.0/Win2000 (with NTFS File System).
Question: Currently, Linux can only read NTFS files but not write to it. What
is the reason for this? Is there any hope that Linux will be able to both
I have an embarrassing question to ask. I installed Mutt and upon running
the creature it complained that I do not have a mailbox. This is a big
mystery for me. How do I get/make a mailbox?
I've never used mutt, but did it ask you if it could create a mailbox? Elm
does that upon first
On September 8, 2001 09:42 am, Siavash Sefidvash wrote:
Apologies for sounding naive, but is not fair to get paid for your
efforts.?
...There's actually a bigger issue at stake. Win XP is actually taking a
fingerpint of your system. Your NIC, HDD, CD-ROM, CPU, etc all have unique
serial
Es Divendres 07 Setembre 2001 14:03, en Jeremy Davidson va escriure:
I have an IBM Deskstar 75GXP 30GB drive which is ATA100 compatible, but I
have a feeling that MDK8.0 is not taking full advantage of this feature.
My motherboard, an Asus A7A266, also supports this.
A line showed up during
Hi All,
I am in the process of building a 3 computer network which is as
follows:
Tower acting as server
a desktop as a workstation
and a laptop workstation needs to be removable from network
That said now the laptop has a problem the linksys EtherFast 10/100 is
not reginized hear a long and
On Sunday 09 September 2001 05:30, Tom Brinkman wrote:
[snip]
IMO, this aspect of M$ business practices, not some silly idea of
integrating IE into the Win OS, is M$'s real crime. I hope source
disclosure (API's) is the next focus of DOJ's and EU's remedies for the
M$ monopoly. Then at
Very helpful, thanks.
cat /proc/pci says, in abstract
Device:IRQ
Video card:11
3com LAN:10
Realtek (which is actually my D-link LAN, go figure):9
USB Controller:3
The on board sound and or parallel port (I think you are right, since
shortly after it mentions lp0, even though I don't have a
As much as I dislike the situation, you can't really blame nvidea..
Microsoft offered them huge wads of cash to design the Xbox internals,
there were no other big offers and they could certainly use the cash back
then...
So they did it and Microsoft are now making Nvidea lots of money... so
Clarification, it's modprobe that won't work, but I can insmod 3c59x.
Original Message
Subject: [Fwd: Re: [newbie] Hardware detect lockup, installing new
network card]
Date: Sat, 08 Sep 2001 17:53:45 -0400
From: ryan_steffes [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To:
On Sat, 2001-09-08 at 14:05, Robert F. Trettel wrote:
That said now the laptop has a problem the linksys EtherFast 10/100 is
not reginized hear a long and short beep when inserting.
Did some checking at Linksys web site,they say to get it to work have to
do
some compiling. heck I can just
At 06:17 PM 09/08/2001 -0400, you wrote:
This is a multi-part message in MIME format...
=_87580-7607-2231
You don't have permission to access / on this server.
what do i need to chmod on this
chmod 600? 755? what I worked till i think my boss chmod 600
thanks
Brandon Caudle
Well the thing in Linux, is that if there are problems with an IRQ
conflict, your hardware is not going to work. I ran into problems like
this with one of my machines.
In Windows, if there are IRQ conflicts, it will still manage to find the
address for the hardware and send the correct
On Wednesday 05 September 2001 17:03, Sridhar Dhanapalan wrote:
On Tue, 4 Sep 2001 20:59, George Petri wrote:
I know this is a very, very trivial question but for some reason I can't
find the manual for it:
How do I change the default login group for a user?
I've looked in
In KDE, go to:
Configure - KDE - File Browsing - File asociations
and there, look for html extension. Konqueror will appear as
preffered app to open it. Just add or select Netscape Navigator first.
I don't know nothing about that bug...
Naish
El Sáb 08 Sep 2001 15:09, escribiste:
-BEGIN
okay i added the line /mnt/cdrom *.localdomain(ro,insecure) to my exports
file in /etc i dont have a local host name setup, left as default in
mandrake... but i want my slackware machine to be able todo a nfs to the
mandrake machines cdrom... could i just take out *.localdomain... and put
You cannot set up that modem in linux, because it's a Winmodem, buy a true
modem (external better).
Naish
El Sáb 08 Sep 2001 21:12, escribiste:
Mandrake 8.0 - 2.4.3-20mdk
I install the Linux Mandrake 8.0 in my computer and have two weeks what
can´t use my modem HSP56 MicroModem I need
LURKER here, setup your system to dual booting, boot to either Windows or
Lunux using the LILO (LInux LOader) then you can use Windows until you have
your problems solved in Linux. Also the HSP56 Micromodem is a Winmodem and
will not work in Linux without special drivers. The best thing is
On Saturday 08 September 2001 20:01, you had thoughts to the concept of:
On Wednesday 05 September 2001 20:53, etharp wrote:
that gateway is for the computer you are on, so the gateway would be the
IP your ISP assigns via dhcp, the gateway to the client computers (the
rest of your home
thanks
Brandon Caudle
--
15yr Old Avid Unix User (HP-UX,FreeBSD,Linux)
Larkhaven Golf Course
Charlotte, NC
There cannot be a crisis next week. My schedule is already full. -- Henry
Kissinger
- Original Message -
From: Michael D. Viron [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
sorry if we seem to be going over the same stuff, but what does (in a text
console, without the quotes) ifconfig say?
On Saturday 08 September 2001 18:16, ryan_steffes wrote:
Clarification, it's modprobe that won't work, but I can insmod 3c59x.
Original Message
Subject:
I have both mandrake 8 and pcq 7.1 working on the same machine. When I rec
sound in terminal if I press ctrl+c, rec stops in pcq 7.1, but not in mdk 8.
What can be the reason?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC
A friend of mine burnt me a copy of the 2-cd version of mandrake 8.
I did a full install (expert mode, medium security) and it *never* asked
me to put in the 2nd cd (mandrake 7.2 does).
Do I have to manually install everything on the 2nd cd (rpm -ivh
/mnt/cdrom/Mandrake/RPMS2/*.rpm) or did I
OUTPUT
dmesg
Linux version 2.4.8-12mdk ([EMAIL PROTECTED]) (gcc version
egcs-2.91.66 19990314/Linux (egcs-1.1.2 release / Linux-Mandrake 8.1))
#1 Fri Aug 24 16:18:19 CEST 2001
BIOS-provided physical RAM map:
BIOS-e820: - 0009fc00 (usable)
BIOS-e820:
Adilson Nunes wrote:
Mandrake 8.0 - 2.4.3-20mdk
I install the Linux Mandrake 8.0 in my computer and have two weeks
what can´t use my modem HSP56 MicroModem I need of instructions and
drivers for install my modem. I don´t want more use Windows. Please
help me have many days and don´t
Isyour
modem a 'WinModem' ???
If it does,
you better go bye yourself a new one (else - go back to
windohs)
-Original Message-From: Adilson Nunes
[mailto:[EMAIL PROTECTED]]Sent: Sunday, September 09, 2001 3:13
AMTo: [EMAIL PROTECTED]Subject: [newbie] I NEED
OF HELP -
Hmmm
dmesg gives out a message about the ide bus defaulting to 33MHz for PIO and
everyone with IDE drives starts to wonder, Am I really getting all that I
should out of my drive?
PIO is Programmed Input-Output It has five modes, PIO0-PIO4 33MHz is PIO4
Programmed Input/Output is reading
not really win hardware, winhardware like winmodems and stuff tend to rely
on thee CPU to do alot of the work..
you might be able to label them winhardware if they provided no linux
drivers at all... at least they have offered us something, that is more then
a huge number of other manufacturers
Hello everyone,
I have a question about adjusting the screen display on a laptop. I
was able to install Mandrake on my laptop. However the screen is reduced
to a part of what the actual screen size is. On a monitor I can adjust the
visible area so that it fills up the screen. Are there
Mandrake 8.0 -
2.4.3-20mdk
I install the Linux Mandrake 8.0 in my computer and have two
weeks what can´t use my modem HSP56 MicroModem I need of instructions and
drivers for install my modem. I don´t want more use Windows. Please help me have
many days and don´t have success. My english is
9/8/2001 7:18:43 AM, etharp [EMAIL PROTECTED] wrote:
about a million people are going to tell you (and they are correct) that the
GIMP is every bit as good as photoshop, and they do not have the US gov. put
people in jail for talking about how poor their encryption is under the DMCA.
On Saturday 08 September 2001 09:59 pm, civileme escribió:
ON cooker you will find
drakopt-1.01-0.86mdk.noarch.rpm
Install and run it. It will squeeze out everything the kernel is
capable of giving you and build an initscript to keep it happening.
It takes about 30 minutes to test most
On Saturday 08 September 2001 19:40, Keith Lynn wrote:
Hello everyone,
I have a question about adjusting the screen display on a laptop. I
was able to install Mandrake on my laptop. However the screen is reduced
to a part of what the actual screen size is. On a monitor I can adjust the
On Sunday 09 September 2001 02:33, you wrote:
Isaac, here is what i did:
i located the file java. on my system it is in /usr/java/jdk1.3.1/bin
then i exported the path. this i found on the javasun website. here is
what you do:
su to root
#export PATH=/usr/java/path/toyour/java:$PATH
in my
On Saturday 08 September 2001 12:58, jennifer wrote:
On Saturday 08 September 2001 11:56, richied wrote:
On September 8, 2001 09:42 am, Siavash Sefidvash wrote:
Apologies for sounding naive, but is not fair to get paid for your
efforts.?
...There's actually a bigger issue at stake.
You don't have permission to access / on this server.
what do i need to chmod on this
chmod 600? 755? what I worked till i think my boss chmod 600
thanks
Brandon Caudle
--
15yr Old Avid Unix User (HP-UX,FreeBSD,Linux)
Larkhaven Golf Course
Charlotte, NC
There cannot be a crisis
On Wednesday 05 September 2001 20:53, etharp wrote:
that gateway is for the computer you are on, so the gateway would be the IP
your ISP assigns via dhcp, the gateway to the client computers (the rest of
your home network that is connecting to the Internet) would be the linux
box eth0 IP.
61 matches
Mail list logo
