the primary name (as in item 9 below) is the complete name of your computer,
as assigned to you by your ISP...
The thing is, I don't think I was assigned that. Looking at my sheet
from US West with all my account info, I don't see any primary
computer name. There is a user name and password
Also, I have set up my Powerbook to run Debian Linux and connected
through DSL no problem, configured automatically. The host name I
used for that was the default bame 'debian'.
But I now think maybe somethings up with my ethernet hub, so I'll try
plugging DSL modem straight to computer.
kinda sounds like your DHCP Client ID might be what US West uses...try
username.domain (something like joholland.uswest.com perhaps)...that might
work...much hassle is caused by the various ISP's using different terms to
mean the same thing...let me know if that works and i'll be able to pass
how is the hub fed??...have you a firewall/router between it and the DSL
modem??...if not, then are you shutting down the modem and allowing it to
lose the MAC number of the powerbook, before bringing it up with the mdk
system??...
On Mon, 17 Jul 2000, Joshua Holland wrote:
Also, I have set
if your dsl modem is feeding into an ethernet card (some feed usb instead)
the set-up ought be very similar...
the primary name (as in item 9 below) is the complete name of your computer,
as assigned to you by your ISP...the portion before the first dot (reading
from the left) is unique to
Dear All, Hello again. Can anyone help me find the easiest way to get on
the internet with my newly installed FriendlyNet Asante 10/100 Fast PCI
100 Mbps Fast Ethernet Adapter? The Cox cable technician came yesterday,
installed it for my Windows 95 but could not get it to work in my
Windows 95.
sounds like a tech who needs a bit more training or experience...i'll try to
point you to the where and how of it:
1. be in root to accomplish the following:
2. open drakconf
3. click on network setup
4. click on networking
5. click on basic host information
6. click on adapter 1
7. select the
]
Subject: RE: [newbie] Ethernet problems.
WAIT!
I have @home and I just got this configured in linux
last night. On the receipt that they installation
person left are your DNS addresses, IP address,
subnet
mask and gateway address. If you don't have that
piece of paper or can't make
Thanks a lot Dacia...
AJ
-Original Message-
From: Dacia and AzureRose [mailto:[EMAIL PROTECTED]]
Sent: Sunday, July 09, 2000 3:21 PM
To: [EMAIL PROTECTED]
Subject: RE: [newbie] Ethernet problems.
Cool. Congrats and enjoy.
Dacia
--- A J Benamu [EMAIL PROTECTED] wrote:
Hi guys,
I
-
From: Dacia and AzureRose
[mailto:[EMAIL PROTECTED]]
Sent: Saturday, July 08, 2000 7:32 PM
To: [EMAIL PROTECTED]
Subject: RE: [newbie] Ethernet problems.
WAIT!
I have @home and I just got this configured in linux
last night. On the receipt that they installation
person left
This card is actually made by Accton, a division of SMC networks. Use the
rtl8139 driver in linux. this should get the card to work. For more info, go to
http://www.smc.com.
A J Benamu wrote:
*This message was transferred with a trial version of CommuniGate(tm) Pro*
Hi,
I hope I can get
Your digital id doesn't match your email address anymore.
Please update...
So you don't scare the heck out of us scaredy cats.
Thanks
- Original Message -
From: Jonathan Spearman [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, July 09, 2000 7:39 PM
Subject: Re: [newbie] Ethernet
... THANKS...
Does anybody know how to configure a parallel Zip Drive?
AJ
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Mark Weaver
Sent: Saturday, July 08, 2000 11:14 PM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Ethernet problems.
alas...some
I did what you said and still no ethernet card working..
Any ideas?
Thanks,
AJ
-Original Message-
From: Ralph Day [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 07, 2000 11:51 PM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Ethernet problems.
On my HP with the same NIC card LM
rted using the RTL8139
driver.
- Ralph
- Original Message -
From: "A J Benamu" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, July 07, 2000 11:49 PM
Subject: RE: [newbie] Ethernet problems.
I did what you said and still no ethernet card working..
Any ideas?
Thanks,
AJ
-
which service are you using? I've got @home and all I
had to do was assign eth0 my IP address, subnet mask,
both DNS servers and the gateway IP address. @home
gave me all that information on the receipt that the
installation guy left for me. Can't help you if
you're using a different service.
:59 AM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Ethernet problems.
OK, then we are going to need more information. What exactly does "can't
configure" mean? What have you tried so far? If you have a working Win98
install, how is the card configured there? Any messages about t
: [newbie] Ethernet problems.
Hi AJ,
I have attached a link to a url that will get you up and running. I'm an
@Home cable user and I had one heck of a time getting logged on. After
reading this, everything was working okay.
http://members.home.net/randal.leavitt/CableModemConnectionNotes.html
Good
: [newbie] Ethernet problems.
Hi AJ,
I have attached a link to a url that will get you up
and running. I'm an
@Home cable user and I had one heck of a time
getting logged on. After
reading this, everything was working okay.
http://members.home.net/randal.leavitt/CableModemConnectionNotes.html
Benamu
|Subject: Re: [newbie] Ethernet problems.
|
|
|Hi AJ,
|
|I have attached a link to a url that will get you up and running. I'm an
|@Home cable user and I had one heck of a time getting logged on. After
|reading this, everything was working okay.
|
|http://members.home.net/randal.leavitt
: A J Benamu
Subject: Re: [newbie] Ethernet problems.
Hi AJ,
I have attached a link to a url that will get you up and running. I'm an
@Home cable user and I had one heck of a time getting logged on. After
reading this, everything was working okay.
http://members.home.net/randal.leavitt
UCH EASIER!
AJ
-Original Message-
From: Romanator [mailto:[EMAIL PROTECTED]]
Sent: Saturday, July 08, 2000 6:23 PM
To: [EMAIL PROTECTED]
Cc: A J Benamu
Subject: Re: [newbie] Ethernet problems.
Hi AJ,
I have attached a link to a url that will get you up and running. I'm
On Tue, 25 Jan 2000, you wrote:
I sent this to expert last time, not sure if it got out or not.
I cannot get my 3c509B working in mandrake. I setup Dhcp in linuxconf
like I used to do but to no avail.
[snip]
I solved my own problem. I borried a 3com disk off of my friend and
I sent this to expert last time, not sure if it got out or not.
I cannot get my 3c509B working in mandrake. I setup
Dhcp in linuxconf like I used to do but to no avail. Here are some
printouts that may be helpful.
[root@localhost /root]# dhclient Internet Software
Consortium DHCP
I'm currently using an Intel EtherExpress 16, and I selected
Intel EtherExpress from
the installation options. I set my domain, host, IP, and
everything else up correctly...
but as soon as linux has finished loading it starts to
echo:
i82586 reset timed out, kicking...
i82586 reset timed
On Wed, 06 Oct 1999, you wrote:
%_I'm currently using an Intel EtherExpress 16, and I selected Intel EtherExpress
from
the installation options. I set my domain, host, IP, and everything else up
correctly...
but as soon as linux has finished loading it starts to echo:
i82586 reset timed
I am having a problem with my 3COM EtherLink III ISA 3C509b-TPO card.
From what I have been reading, I am supposed to see some kind of 'eth0'
text in the boot up text (dmesg). However, I am not seeing anything about
eth0 at all. When I try to run dhcpcd I get the following message in the
27 matches
Mail list logo