Re: [Nut-upsuser] SNMPv3 fails when more than one UPS is configured in ups.conf

I have it "working" with the following settings changes from the default in the RPM. By "working" I mean it starts after reboot and after issuing 'sudo systemctl restart nut-driver' but, as expected, it takes quite a while to finish startup.

Re: [Nut-upsuser] SNMPv3 fails when more than one UPS is configured in ups.conf

I've told systemd to wait up to 10 minutes for startup but it's still failing. Sometimes it fails with "timeout exceeded" and sometimes with the ASN error previously reported. I went back to running upsdrvctl -D to see if I could see anything. On the third run I saw messages about "startup timer

Re: [Nut-upsuser] SNMPv3 fails when more than one UPS is configured in ups.conf

Hi Charles, Running upsdrvctl -D start on the host with all three configured to SNMPv3 kicks out 56 different "unhandled ASN 0x81 from ..." lines on all three but importantly they all start up and keep running. I'm starting to suspect the startup is taking so long that systemd is timing out and

Re: [Nut-upsuser] Help, please! Driver for APC Back-UPS 390 Watts / 700 VA, 230V, AVR, IEC Sockets

On December 4, 2017 6:21:23 PM GMT+02:00, Mikael Imperatori Festa wrote: >The server we are using is headless, I can’t install a desktop software >unfortunately. >That’s why I am trying to find a driver for NUT on OpenMediaVault. apcupsd does not require any

Re: [Nut-upsuser] Help, please! Driver for APC Back-UPS 390 Watts / 700 VA, 230V, AVR, IEC Sockets

The server we are using is headless, I can’t install a desktop software unfortunately. That’s why I am trying to find a driver for NUT on OpenMediaVault. Best regards mikael festa The Studio, Cornfields, Portsmouth Road, Ripley, Surrey GU23 6ERt: +44 (0)1932 865 459 | e: mik...@treefrogdesign.tv

Re: [Nut-upsuser] Help, please! Driver for APC Back-UPS 390 Watts / 700 VA, 230V, AVR, IEC Sockets

On Mon, 4 Dec 2017, Mikael Imperatori Festa wrote: I had a look on the website, but I can¹t see a detailed list of supported units. Try installing and using apcupsd. Does it work correctly with the BX700UI? Which protocol is it using? Roger___

Re: [Nut-upsuser] Help, please! Driver for APC Back-UPS 390 Watts / 700 VA, 230V, AVR, IEC Sockets

I had a look on the website, but I can¹t see a detailed list of supported units. The model number is BX700UI. Best regards mikael festa The Studio, Cornfields, Portsmouth Road, Ripley, Surrey GU23 6ERt: +44 (0)1932 865 459 | e: mik...@treefrogdesign.tv | w:

Re: [Nut-upsuser] Help, please! Driver for APC Back-UPS 390 Watts / 700 VA, 230V, AVR, IEC Sockets

On Mon, 4 Dec 2017, Mikael Imperatori Festa wrote: driver = apcupsd port = auto I meant the « APC UPS Daemon » at http://www.apcupsd.org/ Does this support your UPS unit? If so, what protocol is it using? What is the model number of your unit? BX650CI ?

Re: [Nut-upsuser] Help, please! Driver for APC Back-UPS 390 Watts / 700 VA, 230V, AVR, IEC Sockets

Hi Roger, Thank you for your advise. I tried driver = apcupsd port = auto But unfortunately I get the same error message ³Failed to execute command Œupsc 'ups' 2>&1': Error: Driver not connected" As I am not very good in using OMV, maybe there is something else I should do? Thanks Best