[Nut-upsuser] TrippLite OMNIVS1500XL Segmentation Fault

2007-08-10 Thread Junk Mail
I am running Debian Etch, with the nut 2.0.4 packages, and I get a segmentation fault from tripplite_usb. # /lib/nut/tripplite_usb -u root -D auto Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.4) Warning: This is an experimental driver. Some features may not function

Re: [Nut-upsuser] TrippLite OMNIVS1500XL Segmentation Fault

2007-08-10 Thread Arnaud Quette
2007/8/10, Junk Mail [EMAIL PROTECTED]: I am running Debian Etch, with the nut 2.0.4 packages, and I get a segmentation fault from tripplite_usb. # /lib/nut/tripplite_usb -u root -D auto Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.4) Warning: This is an

Re: [Nut-upsuser] Powerware 9155 with SNMP card

2007-08-10 Thread Bernd Markgraf
Hi, Excellent! I'm cross posting this to the development mailinglist, since this is going beyond the scope of the user mailinglist. no problem... So would one go ahead and add these values to ietf_pwr_info[] ? Or would one rather extend that inside pwmib.h? The latter seems more obvious

Re: [Nut-upsuser] TrippLite OMNIVS1500XL Segmentation Fault

2007-08-10 Thread Junk Mail
On Fri, 10 Aug 2007, Arnaud Quette wrote: Charles will surely answer about the cause of the problem, but meanwhile you can use this repository to get nut 2.2.0: deb http://opensource.mgeups.com/beta-new/debian binary/ You can't imagine how long I spent looking for etch packages for 2.2! The

Re: [Nut-upsuser] Powerware 9155 with SNMP card

2007-08-10 Thread Kjell Claesson
Hi Niels, Den Friday 10 August 2007 13.26.56 skrev Niels Baggesen: On Thu, Aug 09, 2007 at 04:59:13PM +0200, Bernd Markgraf wrote: that's indeed not so good... the ietf mib reports them OL but misses some values. like the 3 input phases, temperature etc and gives me battery.runtime.low of 1

Re: [Nut-upsuser] Powerware 9155 with SNMP card

2007-08-10 Thread Bernd Markgraf
Hi again, A little further investigation: su_ups_get: output.voltage 1.3.6.1.4.1.534.1.4.4.1.2.0 SNMP UPS driver : entering su_setinfo(output.voltage) = value: 229.0 According to the XUPS mib the OID of xupsOutputVoltage should be 1.3.6.1.4.1.534.1.4.4.1.2 the driver correctly add .0 for the

Re: [Nut-upsuser] Powerware 9155 with SNMP card

2007-08-10 Thread Niels Baggesen
On Thu, Aug 09, 2007 at 04:59:13PM +0200, Bernd Markgraf wrote: that's indeed not so good... the ietf mib reports them OL but misses some values. like the 3 input phases, temperature etc and gives me battery.runtime.low of 1 which i think is not that good either... Ooops, I really must bem in

Re: [Nut-upsuser] TrippLite OMNIVS1500XL Segmentation Fault

2007-08-10 Thread Charles Lepple
On 8/10/07, Arnaud Quette [EMAIL PROTECTED] wrote: 2007/8/10, Junk Mail [EMAIL PROTECTED]: I am running Debian Etch, with the nut 2.0.4 packages, and I get a segmentation fault from tripplite_usb. # /lib/nut/tripplite_usb -u root -D auto Network UPS Tools - Tripp Lite OMNIVS and

Re: [Nut-upsuser] TrippLite OMNIVS1500XL Segmentation Fault

2007-08-10 Thread Charles Lepple
On 8/10/07, Junk Mail [EMAIL PROTECTED] wrote: The new version works, so far. Actually, for completeness' sake, would you mind posting the output of 'upsc' for that UPS? (Just checking that things look reasonable.) -- - Charles Lepple ___