thanks for the feedback Mathias.
Note that the megatec unknown ups.{mfr,model} is under resolution by
Carlos, so he might ask your for further testing...
2006/3/29, Mathias Mayrhofer [EMAIL PROTECTED]:
I first had to install the development version, and I did that for your
asking.
And the
Megatec v1.4 already has manufacturer and model autodetection. The
output showing unknown means the UPS doesn't provide any information
whatsoever. The only way around this is by adding mfr = Manufacturer
and model = Model manually to ups.conf.
On 3/29/06, Arnaud Quette [EMAIL PROTECTED] wrote:
Hmmm, there's a problem with this output... the present battery
voltage is 26.6 when the nominal value is just 12V. It probably has
two separate battery packs...
The battery.charge value is therefore bogus (the calculation changes
according to battery.voltage.nominal, perhaps I should change
From that I see you're better off using megatec than masterguard. I'll
try to fix the battery charge bug tonight. I'll notify you when it has
been commited to the SVN repository.
On 3/29/06, Mathias Mayrhofer [EMAIL PROTECTED] wrote:
I'm sure, it has two batteries!
output as follows:
4 matches
Mail list logo