Yusuke-san,
I am very sorry; I am not a LS-Dyna user and therefore not so familiar
with how one directs LS-Dyna to write the stress component array
[Sigma_ij] to the d3plot-file.
[Sigma_ij] is the 3x3 symmetric array
| Sigma_xx Sigma_xy Sigma_xz |
| Sigma_xy Sigma_yy Sigma_yz |
| Sigma_xz
Samuel Key samuelkey at bresnan.net writes:
Yusuke-san,
If the components of the stress tensor supplied by the LS-DYNS
d3plot file have the following names: Sigma_XX, Sigma_XY, Sigma_XZ,
Sigma_YY, ...
then one can use the Calculator filter with the formula
Yusuke-san,
If the components of the stress tensor supplied by the LS-DYNS
d3plot file have the following names: Sigma_XX, Sigma_XY, Sigma_XZ,
Sigma_YY, ...
then one can use the Calculator filter with the formula
Pressure = (Sigma_XX + Sigma_YY +
Hi! All!
I'm sorry to ask a lot of questions.
I use LS-DYNA and I input d3plot file to paraview.
If I use ls-prepost, I can indicate pressure but there is not pressure data in
paraview.
So, I can't indicate pressure in paraview.
Should I use some filters??
Thank you a lot.
Best regards