Sorry for digging up an old thread!
Is there a way to store username/password on a Touch for remote
connection to LMS? I would like to avoid entering username and passwd
when I connect
Thanks
Readynas Ultra 2 Plus - LMS 7.8 with BrutefirDRC 2.0 - filter from
Audiolense 4.13 - Touch (EDO and
guidof wrote:
I have a Benchmark DAC 2 D, fed by a Squeezebox Touch with the EDO
extender. When used in coax mode, the DAC automatically switches to the
appropriate resolution, depending on what comes down the pike. Not
always so when used in USB mode. When that happens, I need to cycle the
guidof wrote:
Hmm. many thanks for the suggestion. May try this if Benchmark offers no
fix (I've contacted them).
Guido F.
I agree it would be best if Benchmark can help you out. Do you know
which USB chipset is used in your DAC?
Readynas Ultra 2 Plus - LMS 7.8 with BrutefirDRC 2.0 -
I've got my Touch working with a Stello U3. This uses an XMOS USB chip.
My configuration of the Touch is different though as I use Squeezelite
as a player (and no Touch GUI). I have plans to upgrade my D-Premier to
a 240 this spring and hope that the Devialet USB input will work with my
Touch. I
Ynnek4 wrote:
Thanks for the replies guys. I just put my order in. I have heard you
can potentially upgrade the RAM so that may be an option as well.
Very excited to finally ditch my desktop!
Sorry to be late to this thread.. I've used an Ultra 2 Plus with LMS 7.8
for a long time. Works
Zombie wrote:
I have tried to install several different squeezelite files on my Ultra
2, but it won't install. I triend installing from the ReadyNAS setup in
a web browser...
Do you know which one is the right one and how to go about with it?
The procedure to install squeezelite itself on
Zombie wrote:
And where do I find the required drivers + alsa and how/where do I
install them?
Thanks.
I'm afraid you must go to the Readynas forum
http://www.readynas.com/forum/ with those questions.
OGS's Profile:
Turnandcough wrote:
I too was under the impression that EDO was capable of streaming 24/192
FLAC. My server is nothing fancy, just a basic PC running XP SP3
connected via ethernet.
I have no problems streaming 16/44 or 24/96 FLAC files. Actually I
don't really have any interest in 24/192
Turnandcough wrote:
PC is a quad core Q9550 with 4gb RAM and plenty of free hard drive
space.
I think I'm going to flush TT3.0 AGAIN and give EDO by itself a try.
With this much CPU power LMS should run fine on Windows. Streaming
192kHz FLAC as PCM from one of my Linux boxes only uses around
Turnandcough wrote:
24/192 file:
access: MMAP_INTERLEAVED
format: S24_LE
subformat: STD
channels: 2
rate: 96000 (96000/1)
period_size: 1024
buffer_size: 4096
Seems like your LMS is down sampling. Touch may be reporting 96kHz as
max to LMS for some reason. Try reinstalling the kernel
Turnandcough wrote:
Sorry I just edited my post - I meant EDO + 7.8 As I mentioned earlier
I finally got Touch firmware to catch up to server software.
I just tried a 24-192 file sent natively to the Touch and it worked. I
then tried another from HD Tracks and it didn't. 24-192 PCM to
the next months.
Olav
--
OGS
Readynas Ultra 2 Plus - SBS with BrutefirDRC - filter from Audiolense
4.1XO - Touch (bypassed output caps and soundcheck's mods) - Rotel
RB-960BX (mod) - KEF Q300
OGS's Profile: http
for a Vortexbox.
--
OGS
Readynas Ultra 2 Plus - SBS with BrutefirDRC - filter from Audiolense
4.1XO - Touch (bypassed output caps and soundcheck's mods) - Rotel
RB-960BX (mod) - KEF Q300
OGS's Profile: http
a huge difference.
--
OGS
Readynas Ultra 2 Plus - SBS with BrutefirDRC - filter from Audiolense
4.1XO - Touch (bypassed output caps and soundcheck's mods) - Rotel
RB-960BX (mod) - KEF Q300
OGS's Profile: http
.
+---+
|Filename: alsa_name.zip|
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=11443|
+---+
--
OGS
Vortexbox - BrutefirDRC with filter from
this.
Olav
--
OGS
Vortexbox - BrutefirDRC with filter from Audiolense 4.0 - Touch
(bypassed output caps) - Rotel RB-1060 (mod) - KEF Q300
OGS's Profile: http://forums.slimdevices.com/member.php?userid=32981
View this thread
Thanks very much John. Exactly what I was hoping for. I will try with
the II+ and Pro models in addition to the II this evening.
Olav
--
OGS
Vortexbox - BrutefirDRC - Touch (bypassed output caps) - Rotel RB-1060
(mod) - KEF Q300
perfectly in my setup. I'll test the Streamer II+ tomorrow
and report back.
Olav
--
OGS
Vortexbox - BrutefirDRC - Touch (bypassed output caps) - Rotel RB-1060
(mod) - KEF Q300
OGS's Profile: http://forums.slimdevices.com
, but then I guess I'd need John's special
built firmware.
Olav
--
OGS
Vortexbox - BrutefirDRC - Touch (bypassed output caps) - Rotel RB-1060
(mod) - KEF Q300
OGS's Profile: http://forums.slimdevices.com/member.php?userid=32981
subdevices_avail: 1
--
OGS
Vortexbox - Touch (bypassed output caps) - Rotel RB-1060 (mod) - Tannoy
Sensys DC1 (mod)
OGS's Profile: http://forums.slimdevices.com/member.php?userid=32981
View this thread: http
bypassed them so I know. This may very
well be the reason for the OP's SBT's sounding different.
--
OGS
Vortexbox - Touch (bypassed output caps) - Rotel RB-1060 (mod) - Tannoy
Sensys DC1 (mod)
OGS's Profile: http
into the Touch
firmware some time, but Logitech seems reluctant.
--
OGS
Vortexbox - Touch (bypassed output caps) - Rotel RB-1060 (mod) - Tannoy
Sensys DC1 (mod)
OGS's Profile: http://forums.slimdevices.com/member.php?userid
Hi John,
further up this thread you say that the Touch will switch to
asynchronous mode with for example the Ayre QB-9. Which Touch firmware
is needed to achieve this?
--
OGS
Vortexbox - Touch - Tact RCS 2.0 - Rotel RB-1060 (mod) - Tannoy Sensys
DC1 (mod
not quite know how to check how
the Streamers are registered in the Touch.
Is your driver a separate binary with a config file or will it have to
be compiled into a firmware to work?
--
OGS
Vortexbox - Touch (bypassed output caps) - Rotel RB-1060 (mod) - Tannoy
Sensys DC1 (mod
??
--
OGS
Vortexbox - Touch - Tact RCS 2.0 - Rotel RB-1060 (mod) - Tannoy Sensys
DC1 (mod)
OGS's Profile: http://forums.slimdevices.com/member.php?userid=32981
View this thread: http://forums.slimdevices.com/showthread.php?t=82040
the Tact room correction in this
configuration so I'm testing BrutefirDRC at the moment.
--
OGS
Vortexbox - Touch - Tact RCS 2.0 - Rotel RB-1060 (mod) - Tannoy Sensys
DC1 (mod)
OGS's Profile: http://forums.slimdevices.com
definitions of audiophile, but I doubt yours would qualify.
If you like to talk rubbish I'll leave you to it...
--
OGS
Vortexbox - Touch - Tact RCS 2.0 - Rotel RB-1060 (mod) - Tannoy Sensys
DC1 (mod)
OGS's Profile: http
, the Ayre or one of the other asynchronous USB dacs?
You should before you state things like this
--
OGS
Touch - Tact RCS 2.0 - Rotel RB-1060 (mod) - Tannoy Sensys DC1
OGS's Profile: http://forums.slimdevices.com/member.php
with polyprop caps in series with the signal. The
improvement is quite dramatic in some respects.
--
OGS
SB2 (mod) - Tact RCS 2.0 - Rotel RB-1060 (mod) - Tannoy Sensys DC1
OGS's Profile: http://forums.slimdevices.com/member.php
.. is there a DC-blocking electrolytic on the audio output of the DAC?
AKM's diagram indicate that it may be possible to do without the
electrolytic which would be great!
I've pre-ordered my Touch today and I am really looking forward to swap
my SB 2 with the new wonder.
--
OGS
SB2 (mod
..that is what I use in my current setup, but I have friends that will
be using the analog out and it is really nice to know that I won't have
to worry about cheap electrolytics in the signal path. Thanks for the
info Phil.
--
OGS
SB2 (mod) - Tact RCS 2.0 - Rotel RB-1060 (mod) - Tannoy Sensys
31 matches
Mail list logo
