Turnandcough wrote:
Does this mean that when we install the latest version of EDO we are
also installing 50% of TT without actually having to install TT?
Absolutely.
There are - out of my memory -
1. Output routing to hw interface
2. Passing by asound.conf routing table
3. 2nd Jive_alsa
SBGK wrote:
another tweak to get EDO sounding good
echo 1000 1024000 512 2048 /proc/sys/kernel/sem
in the kernel section of the TT file
makes quite a difference over the default or TT setting
I think this is the wrong place to post your stuff. You seem to hijack
the next thread with
SBGK wrote:
try commenting out the following lines in the kernel section
echo 0 /proc/sys/net/ipv4/tcp_app_win #new
echo 1000 /proc/sys/kernel/sched_rt_period_us
echo 999 /proc/sys/kernel/sched_rt_runtime_us
the SBGK settings are really designed to put all resource to
Screenoff works as it's supposed to work. My fault. I'm still in the
warming-up phase. ;)
I still need to measure the change on power consumption again.
Another topic:
Can you give me a hint where you change the IRQ-37 priority to 59? And
where do they set jive_alsa to 45, same place?
Thx.
what's low power mode? no ticks off in the kernel? I tested that some
years back. I prefered that option to be enabled.
what's worth to play with is the Config_hz param. I had it once running
at 10k ( with driver patch)
Triode wrote:
Is it still doing this - can you capture any debugs - it should turn off
the backlight when the screensaver kicks in. Note you need to configure
the screensaver to be Display Off not Screen Off which is what I
think the default saver is called (which is hidden by the applet).
JohnSwenson wrote:
192 (and 176.4) will not work with PCM streaming. With PCM streaming the
sample rate is sent via a separate command, but that command doesn't
have anyway tospecify 176 or 192. With FLAC streaming the sample rate is
included in the FLAC header, which DOES know how to
Triode wrote:
It's intended to do the same as screenoff in Toolbox + also disable
screen updates within squeezeplay, reducing the cpu load when the screen
would be displaying animating text such as long titles etc. Please
check the lua to verify I've got the same as you for the display off
Hiface II runs the XMOS interface chip.
People who run the Wave-IO USB interface, which comes with the same XMOS
chip, have problems to get that device recognized.
That might happen to Hiface II too. The HII should work with the newest
generic Linux USB driver.
At times when I was looking into
Hi there.
Just reinstalled everything. And replaced the binaries (sox/flac) on the
Linux server again.
I took the last 7.8.0 nightly build. Touch got updated too with 7.8.0.
(I also cleaned up my music files to avoid any tag/cue problems on the
db scan - not a single problem in scanner.log
Hi folks.
Havn't been around for a while. Just got back to the Touch (after
running my iPad as player for a while)
Got a question. Not sure if it's a known or my problem. I didn't scan
the last 60 pages of this thread.
I have LMS 7.7.2 under Linux running and EDO installed. Somehow not any
Hi Triode.
I'm gonna try your mod today.
I'm wondering if there's a way to mod certain snd-usb-audio params, such
as nrpacks?? Playing with that one led to pretty nice improvements on my
linux machines in the past.
Another one:
Since you recompile a new kernel. Have you played with the timer
-installation on a small computer
such as FitPc (I still have one around. It's much too expensive though)
Quite some people are extremely happy running an Alix board with a
stripped down Linux on it).
--
soundcheck
::: ' Touch Toolbox 3.0 and more' (http://soundcheck-audio.blogspot.com
time on that subject.
The Touch via SPDIF (after heavily tweaking) can IMO outperform highest
quality USB-SPDIF interfaces though.
Cheers
--
soundcheck
::: ' Touch Toolbox 3.0 and more' (http://soundcheck-audio.blogspot.com)
::: by soundcheck
with the ehci interrupt 37.
Just change it in my prio function of TT3.0.
I just tried to set 37 to prio 96.
I'm currently runnning the buffer at 4000us stable.
Let see if it is really that stable. ;)
Sounds promising to me.
Cheers
--
soundcheck
::: ' Touch Toolbox 3.0 and more' (http
Paulkouhan;668566 Wrote:
Hi !
Klaus (soundcheck) has made his TT 3.0 mod available !!
I did install it but I have some trouble to make my USB dac working
...
It was OK with the TT 2.0 mod with John advices.
I did not found yet how to change the card to the USB one...
Does someone
wife an iPad with iPeng or similar. I'm sure she'll love
it. A nice compromise. Or better a win-win ;)
--
soundcheck
::: ' Touch Toolbox 2.0 and more' (http://soundcheck-audio.blogspot.com)
::: by soundcheck
soundcheck's
by default. That's pretty
aggressive.
You might want to increase that and lower the buffersize.
I don't have a DAC for testing it myself.
Cheers
--
soundcheck
::: ' Touch Toolbox 2.0 and more' (http://soundcheck-audio.blogspot.com)
::: by soundcheck
Hegel works ... Enjoy.
--
soundcheck
::: ' Touch Toolbox 2.0 and more' (http://soundcheck-audio.blogspot.com)
::: by soundcheck
soundcheck's Profile: http://forums.slimdevices.com/member.php?userid=34383
View this thread: http
BTW... ...Vortexboxplayer. Cool. Never heard about it before.
I'll have a look at it.
Back to good old mpd. ;)
Cheers
--
soundcheck
::: ' Touch Toolbox 2.0 and more' (http://soundcheck-audio.blogspot.com)
::: by soundcheck
( the ones
which can live without proprietary drivers) of USB DACs.
--
soundcheck
::: ' Touch Toolbox 2.0 and more' (http://soundcheck-audio.blogspot.com)
::: by soundcheck
soundcheck's Profile: http://forums.slimdevices.com
Just curious:
Anybody out there who tried to play a .wav chunk just by using aplay ?
--
soundcheck
::: ' Touch Toolbox 2.0 and more' (http://soundcheck-audio.blogspot.com)
::: by soundcheck
soundcheck's Profile: http
) is more than outdated. We
had a ticket open some time back. That one got simply ignored by
Logitech.
--
soundcheck
::: ' Touch Toolbox 2.0 and more' (http://soundcheck-audio.blogspot.com)
::: by soundcheck
soundcheck's
) '
(http://forums.slimdevices.com/showpost.php?p=610116postcount=329) the
WLAN/LAN impact on the Touch!
Now the battlefield can be moved on toward the DAC side.
Or... ...Buy a Transporter. ;)
Or. Buy a 12$ cable.
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com
and will forget about my little Touch
Toolbox project.
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html)
|| 'soundcheck's Touch Toolbox - Beta Blog'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-tt
up a
business.
From what I understood Stereo did listening tests only and refered to
the crosstalk numbers as measured by Meicord.
But don't nail me on that.
Cheers
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch
distortions.
Interesting view.
That definitely would make a nice case for the Myth Busters.
I can tell you that my list of so called High-End DACs responding to my
changes, grows on a daily basis. The latest was a 3k5$ device.
Cheers
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http
is that different systems and system configurations do seem to
have an impact.
Now it's the task to figure out what's causing it.
Stretch your legs for now.
Enjoy.
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch
Blog - to
gather feedback from others about a subject under investigation.
I do realize that it was much too early to involve the crowd over here
and elsewhere in that discussion.
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox
. And here the result was similar.
I even tested on a 2.6.38-rc2 kernel. Just to make sure to have the
newest driver on board.
Feel free to run the traces. I do regard all this as a community
effort.
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01
about the subject and ethernet cables
in particular.
Phil Leigh;608168 Wrote:
Or use wi-fi!!!
Enjoy your Wifi.
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html)
|| 'soundcheck's Touch Toolbox - Beta
: Are you still running room equalitzation filtering on your Tacts
by the way?
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html)
|| 'soundcheck's Touch Toolbox - Beta Blog'
(http://soundcheck-audio.blogspot.com
at
it.
No more speculations to feed the sharks.
Each network itself has so many variables.
BTW: I was just informed by mail that I should not forget to have a
closer look at my Windows server network settings!
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01
at home. And I'm able to manage it quite
well.
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html)
|| 'soundcheck's Touch Toolbox - Beta Blog'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-tt-beta
kiat;607866 Wrote:
Hi soundcheck
I've compared the difference
1) ReadyNas Duo 1GB, firmware 4.1.7, SqueezeBoxServer 7.6.0~31873
2) Win 7 64bit, 8GB, SqueezeBoxServer 7.6.0~31873
I personally find that the ReadyNas Duo sounds better. Cleaner with
tigher bass.
I got similar feedback
)
2) Win7 64bit, 12GB, SqueezeBoxServer 7.6.0 - 31873
Squeezebox Touch Firmware: 7.6.0-r9297
Interesting.
Perhaps you'd try my workaround. You never know -- it might get even
better. ;)
BTW: Does your Sheevaplug got enough power to do server based flac
decoding?
--
soundcheck
I just wrote up the instructions on TT Beta Blog for the Linux folks
around here.
Let me know what you think.
Have fun.
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html)
|| 'soundcheck's Touch Toolbox
to
this theory.
You know what I try next.
I'm gonna play a wav file from SD-card with aplay from Touch
commandline. ;)
And just to mention it: All PC based audiophile players use mainly
full file RAM buffering. Mainly to avoid heavy I/O load during
playback.
--
soundcheck
'soundcheck's
receiver
side.
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html)
|| 'soundcheck's Touch Toolbox - Beta Blog'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-tt-beta-blog.html
much on a W7 system yet. I just did
throughput tests
on my Linux machine, while trying to tweak the ethernet parameters on
both ends.
Let see. I maybe have a solution to get the Linux issue resolved.
We'll be testing it tonight.
Cheers
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http
out there.
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html)
|| 'soundcheck's Touch Toolbox - Beta Blog'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-tt-beta-blog.html
to reallign. I might give it a try.
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html)
|| 'soundcheck's Touch Toolbox - Beta Blog'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-tt-beta-blog.html
. You could have tested it by yourself to
find out.
Fact is. It's not the flac itself, which sounds flat or different from
wav.
From a PCM perspective it is 100% identical to .wav once decoded.
It is the realtime decoding causing the difference.
--
soundcheck
'soundcheck's Touch Toolbox 2.0
a graduated telecommunications engineer. I established my first
Cisco based US wide WANs in 1992.
You bet that I know what I'm talking about.
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html)
|| 'soundcheck's
to read this 'this'
(http://www.cardas.com/content.php?area=insightscontent_id=11pagestring=Do+Measurements+Matter)
article about what highly regarded audio manufacturers think about
measurements and the necessity of listening tests as the final
confirmation.
Enjoy.
Cheers
--
soundcheck
concentrate on the HW. You can expect similar jumps on
that side.
Key areas are the network and the SPDIF link. And not to forget the
power
supply of course.
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20
. ?
Cheers
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html)
|| 'soundcheck's Touch Toolbox - Beta Blog'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-tt-beta-blog.html
and reinstall it again. Make sure you're at /
directory when unpacking.
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html)
|| 'soundcheck's Touch Toolbox - Beta Blog'
(http://soundcheck-audio.blogspot.com/2011/01
minutes to find out on your own.
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html)
|| 'soundcheck's Touch Toolbox - Beta Blog'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-tt-beta-blog.html
and preparation and documentation and support.
I'm not making money with it. This all means serious overtime on my
side of the balance sheet.
Beside that I havn't seen any serious changes popping up in 7.5.3.
BTW my instructions say: Turn off automatic upgrades
Cheers
--
soundcheck
'soundcheck's
ground bridge) or indirectly the internal electronics of a streaming
device.
They don't talk about the Touch in particular.
I put that note up here, because I consider it part of my
solution/toolbox and a rather valuable update of the blog.
Enjoy.
--
soundcheck
'soundcheck's Touch Toolbox 2.0
I've seen is properly grounded according to
professional standards.
How many active home network devices allow for professional grounding.
And yes. The mess finds its way over the ground into the device.
The wires are isolated, not the ground.
--
soundcheck
'soundcheck's Touch Toolbox 2.0
wouldn't be
surprised if some people here find it too revealing), you're just one
quick Linux command away from restoring everything to its former soft,
wobbly state.
Thanks Soundcheck, I'd say of all the mods you've given us thus far,
this one made the biggest difference in the sound quality
you need to unpack that file first.
run
tar xvf toulchtoolbox20BB1.tar
first
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html)
|| 'soundcheck's Touch Toolbox - Beta Blog'
(http://soundcheck
scooot;604703 Wrote:
hi soundceck,
thanks,i have it now.is it best to leave erlands patch(volume fixed at
100%)installed or uninstalled.regards scott
It won't hurt to uninstall it I guess. In any case you would avoid
interferences between both mods.
--
soundcheck
'soundcheck's Touch
signature for more info about
it.
It'll might not apply to your setup.
Those of you who managed to install the toolbox will easily manage to
install the new mod too.
Enjoy
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch
for your cooperation.
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html)
|| 'soundcheck's Touch Toolbox - Beta Blog'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-tt-beta-blog.html
be misleading.
Though as you can see. People are responding to it. Perhaps it just
works
in conjunction with the other mods. Who knows.
I don't have a clue.
And yes: I just change two parameters as proposed by Peter.
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck
.
Though I told most of the people to pull the slider to 100 to actually
compare apples and apples. And I also thought I did pull it up to 100
while testing.
I've been wondering if the number as shown in Peters mod wasn't 1 point
to high It's 0x +1 isn't it.
--
soundcheck
'soundcheck's
but it is more likely to stay that
way as logi still has interface bugs that can move your volume.
OK. That's what we're looking for I'd guess.
--
soundcheck
'soundcheck's Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html)
|| 'soundcheck's
not
acceptable to me.
--
soundcheck
'soundcheck's audio@vise - Squeezebox Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html)
soundcheck's Profile: http
this particular person from my side.
It's really not worth it.
--
soundcheck
'soundcheck's audio@vise - Squeezebox Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html
won't get an answer on
your questions from my side anymore.
Again thx to all the people who appreciated and still appreciate that
Toolbox.
Trust your own ears!!!
Enjoy.
--
soundcheck
'soundcheck's audio@vise - Squeezebox Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01
.
Of course I do listen very closely to other then FUD feedback.
You guys enjoy trust your own ears.
--
soundcheck
'soundcheck's audio@vise - Squeezebox Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html
some space left. I could live with my setup for a
long long time.
Cheers
--
soundcheck
'soundcheck's audio@vise - Squeezebox Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html
audiophile
potential they gonna sell even more Touches.
If they want to talk about integrating my solution -- I'll be here.
--
soundcheck
'soundcheck's audio@vise - Squeezebox Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html
challenges to keep PC induced distortions out of
his setup.
Enjoy.
--
soundcheck
'soundcheck's audio@vise - Squeezebox Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html
.
--
soundcheck
'soundcheck's audio@vise - Squeezebox Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html)
soundcheck's Profile: http://forums.slimdevices.com/member.php
scooot;602442 Wrote:
hi soundcheck,
i posted earlier on other thread before you switched it over here.i
done mods,all ok then updated touch sotfware.reinstalled mods but the
buffer mod would not take.it kept reverting back to 2 after
rebooting.
you suggested a factory reset for touch
with 2.0.
Buckle up. ;)
--
soundcheck
'soundcheck's audio@vise - Squeezebox Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html)
soundcheck's Profile: http
.
Cheers
--
soundcheck
'soundcheck's audio@vise - Squeezebox Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html)
soundcheck's Profile: http://forums.slimdevices.com
--
soundcheck
'soundcheck's audio@vise - Squeezebox Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html)
soundcheck's Profile: http://forums.slimdevices.com/member.php?userid
Hi folks.
As requested, I added a little screenshot to the blog to hopefully make
the installation a bit easier.
I also revised a bit the flac and other formats decoding instructions.
Cheers
--
soundcheck
'soundcheck's au...@vise - Squeezebox Touch Toolbox 2.0'
(http://soundcheck
first. There you'll find what
revisions are supported.
Cheers
--
soundcheck
'soundcheck's au...@vise - Squeezebox Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html
--
soundcheck
'soundcheck's audio@vise - Squeezebox Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html)
soundcheck's Profile: http://forums.slimdevices.com
, calls, name-calling, etc. ;). You did great,
Soundcheck...just needed a few tweaks for us noobslike anything
else does.
Thx for the feedback. It's obviously not that easy.I never stepped over
commander mode.
What I'm gonna do is I'm packaging the toolbox with absolute path
assigned.
Now
buffers settings. :D
Beside that I need to figure out new mods. Listening to great sound
challenges my creativity to go after more. :D
Cheers
--
soundcheck
'soundcheck's au...@vise - Squeezebox Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch
- don't
expect huge jumps.
Many people asked for WLAN on/off though. I wasn't really happy with
this request. However I still built that feature in. Even small
improvements can be enjoyable.
Thx for the feedback. Good to see that it worked out for you too.
--
soundcheck
'soundcheck's au...@vise
if Logitech ever updates to a
newer kernel resp. Alsa before Touch reaches EOL.
Cheers
--
soundcheck
'soundcheck's au...@vise - Squeezebox Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html
firedog;601409 Wrote:
I agree. The page does say it, but make it a little more explicit that
logging in may require clicking up to the root directory. I missed
that at first.
You might want read the updated phrase. Perhaps I'm gonna upload a
screenshot.
--
soundcheck
'soundcheck's au
. Ssh is
enabled.
Any clues?
ttout -dspace?
--
soundcheck
'soundcheck's au...@vise - Squeezebox Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html)
soundcheck's
scooot;601458 Wrote:
hi soundcheck,
is there any chance you can post some screen shots of the touch mods
procedure.i am totaly lost off from 1.2.4 on the instructions.i am very
limited on computer based knowledge so it is just going over my head.i
very much want to do the mods.thanks.kind
for solving it.
BTW. I just changed from Beta to Normal status.
Cheers
--
soundcheck
'soundcheck's au...@vise - Squeezebox Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html
No - No changes from Beta to Final.
Cheers
--
soundcheck
'soundcheck's au...@vise - Squeezebox Touch Toolbox 2.0'
(http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html)
soundcheck's
login and . . .
\NETWORK ERROR, CONNECTION REFUSED\
What am I doing stupidly wrong?
Thanks for any help
Guido F.
Are you sure your IP ends with .6 and not 206?
Check your Touch setting once more.
Cheers
--
soundcheck
'soundcheck's au...@vise - Squeezebox Touch Toolbox 2.0'
(http
firedog;600760 Wrote:
the 2.0 mods are now downloadable:
http://soundcheck-audio.blogspot.com/2011/01/soundchecks-squeezebox-touch-toolbox-20.html
I unpacked the file in my Touch root directory, but the directions he
gives for initializing the files (run commmand ttinit) in the root
They will. ;)
--
soundcheck
'soundcheck's au...@vise - Squeezebox Touch Modification Blog'
(http://soundcheck-audio.blogspot.com/p/squeezebox-touch-great-base-for-network.html)
soundcheck's Profile: http
.
Or: Check the batteries of your hearing aid.
But: It's not about thinking of hearing something!
I am sure those discussions will go on forever. Every 2nd thread over
ends up like that.
Enjoy. (I do!)
--
soundcheck
'soundcheck's au...@vise - Squeezebox Touch Modification Blog'
(http
margin for Logitech and
even more fun for the audiophile customers.
They should also team up with iPeng to provide a nice control for iPad
(That'll save even more cost for them!).
Enjoy.
Cheers
--
soundcheck
soundcheck's
Kuja;557877 Wrote:
Of course I can it try by myself and see. :)
You better hurry up. Don't forget to invite your friends. ;)
--
soundcheck
soundcheck's Profile: http://forums.slimdevices.com/member.php?userid
, environmental conditions and personal listening
preferences.
If my overall system gain changes and I'd need a general gain adjust on
my source material, I just run a script that adds or subtracts
respective dbs on all my album volume flags.
Cheers
--
soundcheck
. On .wav and
.flac. The value is stored in a file of the directory of each album.
This way I don't have to do any volume control on the fly during
listening sessions. The player starts. If the file is there the value
will be applied.
Pretty simple and effective.
Cheers
--
soundcheck
clue how to accomplish this on the Touch.
Anybody around who'd have a clue?
THX
Cheers
--
soundcheck
soundcheck's Profile: http://forums.slimdevices.com/member.php?userid=34383
View this thread: http://forums.slimdevices.com
--
soundcheck
soundcheck's Profile: http://forums.slimdevices.com/member.php?userid=34383
View this thread: http://forums.slimdevices.com/showthread.php?t=78244
said earlier. Doing the simple asoundconf mod and being able
to mod the Touch application Alsa device parameter settings would be a
pretty simple exercise.
--
soundcheck
soundcheck's Profile: http://forums.slimdevices.com
be that hub-support.
And: The new Alsa usb-audio driver 1.0.22-B is lighyears ahead ( much
wider device support, asynch USB, 192khz, better USB handling...) of
the old stuff on the Touch.
Hopefully one day we'll see a 2.6.33-rt and 1.0.22b Alsa on the
device.
Cheers
--
soundcheck
be done, than SPDIF is IMO the first
choice.
Cheers
--
soundcheck
soundcheck's Profile: http://forums.slimdevices.com/member.php?userid=34383
View this thread: http://forums.slimdevices.com/showthread.php?t=77908
how you've done it. ( No
in-depth explanation required). asound.conf is not an issue.
Cheers
--
soundcheck
soundcheck's Profile: http://forums.slimdevices.com/member.php?userid=34383
View this thread: http
You could have added to the Ticket that by stopping a song with clear
playlist ( I tested it with iPeng) the off screen saver won`t stay
activated either. Backlight will be on on a black screen afterwards.
Or sometimes not any screensaver will be activated.
Cheers
--
soundcheck
for now. I gotta feeling that things get too
complicated.
Jumping from here to there.
BTW: Did you see that the /proc/asound/version shows 1.0.16 and aplay
--version is giving you 1.0.18 !?!? Hmmh.
Cheers
--
soundcheck
1 - 100 of 114 matches
Mail list logo
