So let me get try to get my head around this... because I didn’t notice you mention this before... Are you trying to set up a “clustering environment”.... using 2 different versions of OM?
Sent from my iPhone > On Aug 26, 2020, at 10:59 AM, kaffeesurrogat <kaffeesurro...@posteo.de> wrote: > > Me again, > > i made comparison between the my conference rooms. > > First conference room runs on server 1, older version of openmeetings ... > Second conference room runs on server 2, new release of openmeetings > with several mic problem .... > > the room on server 2 does not have an Owner ID .... mmmmmm ..... > > > > >> On 26/08/2020 17:46, kaffeesurrogat wrote: >> Deear Denis, dear Maxim, dear Alvaro, dear ... oh there are so many ;-) >> >> i checked, if this is reproducible. I've made a note of every single step: >> >> >> 1) login user 1 (moderator) >> 2) user 1 entering private room >> 3) user 1 turns camera and mic on >> 4) login user 2 (not a moderator) >> 5) user 2 is entering private room >> 6) user 2 requests permissions to use camera and mic >> 7) user 1 grants permissions to use camera and mic via activities and >> actions >> 8) user 2 turns on camera and mic >> user 1 and user 2 see/hear each other >> 9) user 1 leaves the room >> user 2 sees "wait for moderator..." message >> 10) user 1 re-enters the room >> wait for moderator dissapears >> user 1/user 2 cameras/mics off >> 11) user 1 turns cam/mic back on >> => user 2 sees user 1 >> 12) user 2 turns cam/mic back on >> => user 1 does not see user 2 (question mark face ...) >> => several mic symbols displayed on user 2 - browser for user 2..... >> >> see attached pic .... >> >> user1 >> >> chrome 84.0.04147.135 (Official Build) 64 Bit gentoo linux machine >> >> user 2 >> >> Firefox 79 (64 Bit) >> Windows 10 >> >> user 1 and user 2 both on the same network different machines >> >> server >> >> ubuntu 18.04 LTS >> >> openmeetings ... >> >> Version >> 5.0.0 >> Revision >> 422e22f >> Build date >> 2020-08-18T00:21:52Z >> >> Many thanks again, >> >> kaffeesurrogat >> >> >> >> >> >>> On 26/08/2020 08:50, Denis Noctor wrote: >>> @kaffeesurrogat, >>> >>> First of all can you confirm that you can see and hear at least 2 users in >>> a room as it is a little unclear... and if you’ve read my previous email. >> yes there are two users in the room. the can hear an see each other .... >> >>> I won’t be able to respond immediately as I am on the the other side of the >>> planet and am heading off to bed... (1.38am)... but I am curious to see if >>> you have been able to reproduce this scenario more than once... as it is >>> not very clear from your posts. >> yes ..... >> >>> The situation you described might be exceptionally rare... as I can’t see >>> the reason for a moderator to leave a room when others are in it... and as >>> a result this scenario might be an oversight... but a very small one... >>> taking meeting protocol into consideration. But I’ve recommended an >>> alternative. >>> >>> Hope this helps somewhat. >>> >>> Again, it is important to stress that it would be useful to identify server >>> specs, browser versions and so on. >>> >>> All the best, Denis. >>> >>> >>> >>> >>> >>> Sent from my iPhone >>> >>>> On Aug 26, 2020, at 1:09 AM, kaffeesurrogat <kaffeesurro...@posteo.de> >>>> wrote: >>>> >>>> Dear Maxim, dear Alvaro, dear .... >>>> >>>> i did use a linux machine and a windows machine to test my setup ..... >>>> I'm quite shure that I made a config mistake, but which one ? >>>> >>>> Many thanks for your testing and trying, >>>> >>>> kaffeesurrogat .... >>>> >>>>> On 25/08/2020 19:07, Ajay Simha wrote: >>>>> Hi, >>>>> >>>>> Are you using two different systems for two logins or just one system >>>>> with two browser >>>>> >>>>> >>>>> >>>>> On Tue, Aug 25, 2020, 18:29 Maxim Solodovnik <solomax...@gmail.com >>>>> <mailto:solomax...@gmail.com>> wrote: >>>>> >>>>> I'll try to test your steps >>>>> will take some time .... >>>>> >>>>> On Tue, 25 Aug 2020 at 01:38, kaffeesurrogat >>>>> <kaffeesurro...@posteo.de <mailto:kaffeesurro...@posteo.de>> wrote: >>>>> >>>>> Dear List, >>>>> >>>>> many thanks for your new release. I feel ashamed, that I have >>>>> to ask >>>>> again and again on this list. >>>>> >>>>> I've installed OM-5.0.0 on an Ubuntu 18.04 LTS and I've >>>>> followed the >>>>> guides from the wiki. >>>>> >>>>> I can open up my camera and mic. The following is happening: >>>>> >>>>> >>>>> 1) moderator enters the rom while nobody is there (chrome). >>>>> 2) second user enters the room. Both enable there camera and >>>>> mic. fine >>>>> :-) (firefox) >>>>> 3) The moderator leaves the room and the second users sees a >>>>> message to >>>>> be patient until the moderator enters the room again. >>>>> 4) moderators reenters the room, both cameras are turned off >>>>> 5) second users turns on his camera .... >>>>> >>>>> quite a few error messages show up, the camera window is >>>>> blue and >>>>> blank on the second users screen, on the moderator screens i >>>>> can see only the questionmarkman ... >>>>> >>>>> I've attached all of my config files and some screenshots as >>>>> png ... >>>>> >>>>> I did check the coturn server with trickle ... also attached >>>>> >>>>> I did attache a screen shot of the moderator account, several mic >>>>> symbols on the screen >>>>> >>>>> The invalidStateError appears on the second users screen >>>>> >>>>> The RtcPeerConnection on the moderator screen ..... >>>>> >>>>> >>>>> I'm lost .... already double checked my config files and >>>>> reread the >>>>> installation manuals .... >>>>> >>>>> >>>>> Many thanks, >>>>> >>>>> kaffeesurogat >>>>> >>>>> >>>>> >>>>> -- >>>>> Best regards, >>>>> Maxim >>>>> >
