Dear Ammar, After setting up sms-resend-retry = 1, you should not face spool/queue issue. If still facing than may be some senior dev can answer on this.
BR Tapan Thapa On Thu, May 28, 2015 at 4:18 PM, Ammar Ali <ammarali3...@gmail.com> wrote: > Hello Tapan, > > > I have update my configuration and restart kannel. Currently its working > fine. > > But I'm facing this problem when smsc connection are re-connecting. > > Some SMS stored for an unlimited amount of time in the Kannel spool. Besides > of this, > they would have been sent on a reconnect of the SMSC (that could happen > several days after the submit, > sometimes voiding the purpose of the sms itself). > > > Can you describe above lines. What is Kannel Spool and which type of sms > are stored in this. But I had not used this in kannel configuration. Is > this default storage for sms? > > Please suggest me what to do. > > > > *Thanks * > > *Ammar Ali* > *Pune (M.H.)* > > > > > > > > > > > > > > > > On Thu, May 28, 2015 at 3:19 PM, Tapan Kumar Thapa < > tapan.thapa2...@gmail.com> wrote: > >> By the way, kannel restart is required after changing this value. >> >> BR >> Tapan Thapa >> >> On Thu, May 28, 2015 at 3:18 PM, Tapan Kumar Thapa < >> tapan.thapa2...@gmail.com> wrote: >> >>> make this entry to sms-resend-retry = 1 and let us know the result. >>> >>> BR >>> Tapan Thapa >>> >>> On Thu, May 28, 2015 at 3:16 PM, Ammar Ali <ammarali3...@gmail.com> >>> wrote: >>> >>>> Hello Tapan, >>>> >>>> First of all thanks for your reply. >>>> >>>> Before I month my setup was: >>>> >>>> [group=core] >>>> sms-resend-freq = 60 >>>> sms-resend-retry = -1 >>>> [group=smsc] >>>> wait-ack = 60 >>>> wait-ack-expire = 0x01 >>>> >>>> >>>> But some days ago I have updated this setup with below values: >>>> >>>> [group=core] >>>> #sms-resend-freq = 120 >>>> #sms-resend-retry = 5 >>>> [group=smsc] >>>> wait-ack-expire = 0x02 >>>> >>>> I have noticed that this problem is occured when queue on smsc >>>> connection. >>>> >>>> *SMSC*[SMSC] SMPP:XXX.XXX.XXX.XXX:XXXX/XXXX:XXXXX:SMPP (online 7698s, >>>> rcvd: sms 0 (0.00,0.00,0.00) / dlr 2092 (0.59,0.47,0.03), sent: sms 1055 >>>> (1.01,0.30,0.02) / dlr 0 (0.00,0.00,0.00), failed 0, *queued 0 msgs*) >>>> >>>> >>>> So please suggest me what to do. >>>> >>>> >>>> >>>> >>>> *Thanks* >>>> >>>> *Ammar Ali* >>>> *Pune (M.H.)* >>>> >>>> >>>> On Thu, May 28, 2015 at 3:05 PM, Tapan Kumar Thapa < >>>> tapan.thapa2...@gmail.com> wrote: >>>> >>>>> Dear Amar, >>>>> >>>>> In the morning, i suggested to try below. Have you tried this? >>>>> >>>>> [group=core] >>>>> sms-resend-freq = 60 #(default) >>>>> sms-resend-retry = 1 # Send sms only once. No retry >>>>> [group=smsc] >>>>> wait-ack = 60 #(default) >>>>> wait-ack-expire = 0x01 #(default) >>>>> >>>>> Regards >>>>> Tapan Thapa >>>>> >>>>> On Thu, May 28, 2015 at 3:01 PM, Ammar Ali <ammarali3...@gmail.com> >>>>> wrote: >>>>> >>>>>> Hello Team, >>>>>> >>>>>> I am sending sms through http application using kannel. >>>>>> >>>>>> But I'm getting multiple messages on particular number. >>>>>> >>>>>> This is my setup: >>>>>> >>>>>> *bearerbox.conf* >>>>>> group = core >>>>>> admin-port = "13000" >>>>>> admin-port-ssl="no" >>>>>> admin-password = "xxxx" >>>>>> status-password = "xxxx" >>>>>> admin-deny-ip="*.*.*.*" >>>>>> admin-allow-ip="*.*.*.*" >>>>>> smsbox-interface ="127.0.0.1" >>>>>> smsbox-port = "13001" >>>>>> log-file = "/var/logs/kannel1.log" >>>>>> log-level = "0" >>>>>> access-log = "/var/logs/access1.access" >>>>>> dlr-storage = "mysql" >>>>>> sms-incoming-queue-limit = -1 >>>>>> sms-outgoing-queue-limit = 100000 >>>>>> smsbox-max-pending = 100 >>>>>> sms-resend-freq = 120 >>>>>> sms-resend-retry = 5 >>>>>> >>>>>> *smsc.conf* >>>>>> group = smsc >>>>>> smsc = "smpp" >>>>>> smsc-id = "SMSC" >>>>>> log-file = "/var/SMSC_LOG1.log" >>>>>> log-level = "0" >>>>>> host = xxx.xxx.xxx.xxx >>>>>> port = "xxx" >>>>>> smsc-username = "xxxxxxx" >>>>>> smsc-password = "xxxxxxx" >>>>>> allowed-smsc-id = "SMSC" >>>>>> preferred-smsc-id = "SMSC" >>>>>> source-addr-ton = "0" >>>>>> source-addr-npi = "1" >>>>>> dest-addr-ton = "1" >>>>>> dest-addr-npi = "1" >>>>>> service-type = "CMT" >>>>>> system-type = "SMPP" >>>>>> alt-charset="UTF-8" >>>>>> alt-addr-charset = "GSM" >>>>>> bind-addr-ton = "0" >>>>>> bind-addr-npi = "0" >>>>>> enquire-link-interval = "120" >>>>>> reconnect-delay = "10" >>>>>> transceiver-mode = "true" >>>>>> interface-version = "34" >>>>>> connection-timeout = "0" >>>>>> throughput = "100" >>>>>> wait-ack-expire=0x02 >>>>>> reroute-dlr=1 >>>>>> >>>>>> *Kannel Monitor:* >>>>>> >>>>>> SMS: received 0 (0 queued), sent 1055 (*0 queued*), store size -1 >>>>>> SMS: inbound (0.00,0.00,0.00) msg/sec, outbound (1.01,0.30,0.02) >>>>>> msg/sec >>>>>> >>>>>> DLR: received 2092, sent 0 >>>>>> DLR: inbound (0.59,0.47,0.03) msg/sec, outbound (0.00,0.00,0.00) >>>>>> msg/sec >>>>>> DLR: 764 queued, using mysql storage >>>>>> >>>>>> Box connections: >>>>>> smsbox:sqlbox1, IP 127.0.0.1 (*0 queued*), (on-line 0d 18h 40m >>>>>> 35s) >>>>>> SMSC connections: >>>>>> *SMSC*[SMSC] SMPP:XXX.XXX.XXX.XXX:XXXX/XXXX:XXXXXXX:VMA >>>>>> (online, rcvd: sms 0 (0.00,0.00,0.00) / dlr 0 (0.00,0.00,0.00), sent: >>>>>> sms 0 >>>>>> (0.00,0.00,0.00) / dlr 0 (0.00,0.00,0.00), failed 0, *queued 0 msgs*) >>>>>> >>>>>> >>>>>> So please check my configuration and let me know what should be my >>>>>> setting for this required setup. >>>>>> >>>>>> One more thing I'm facing this problem because of queue shows on SMSC >>>>>> connection. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> *Thanks* >>>>>> >>>>>> *Amaar Ali* >>>>>> *Pune (M.H.)* >>>>>> >>>>> >>>>> >>>> >>> >> >
