Cheers Ryan, that did the trick. I took the crossfader out and found there was a couple of spare faders on the panel covering it - I switched it for these and it sounds great now :)
David -----Original Message----- From: Blackman, Ryan (UKEKT) [mailto:[EMAIL PROTECTED] Sent: 09 December 2003 05:09 To: 'David Hampson'; 313@hyperreal.org Subject: RE: (313) RE: Technics mixer help! Try pulling it out (the fader) and spraying some silicone spray/electrical contact fluid on it. -----Original Message----- From: David Hampson [mailto:[EMAIL PROTECTED] Sent: 09 December 2003 9:15 To: 313@hyperreal.org Subject: (313) RE: Technics mixer help! BTW: I checked the ground too - problem appears to be on the mixer channel - I've tried on the line in on that channel and don't get no distortion so it looks like the problem is on the inputs on the left phono channel... Also without audio signal (ie nothing playing or on blank grooves) there is no rumbling... Regards David -----Original Message----- From: David Hampson [mailto:[EMAIL PROTECTED] Sent: 09 December 2003 12:16 To: 313@hyperreal.org Subject: Technics mixer help! One channel on my mixer seems to have developed a rumbling sound - does anyone have any idea what I need to do to fix this? It is a sh-dx1200 and it has remained in the same set-up since I originally bought it (ie I'm not plugging and unplugging cables all the time). BTW I have verified it is not down to the turntable or cartridge by switching channels - other channel works fine!?! Cheers David **************************************************************************** *********** Opinions expressed in this email are those of the individual and not Entergy-Koch Trading Limited or its affiliated companies. This email and any files transmitted with it, including replies and forwarded copies (which may contain alterations) subsequently transmitted from the Company, are confidential and solely for the use of the intended recipient. It may contain material protected by attorney-client privilege. If you are not listed on the "To" or "Cc" lines of the original email (or are not the person responsible for delivering to an intended recipient), then you are not an intended recipient and have received this email in error. Any use by an unintended recipient is strictly prohibited. If you have received this email in error please notify the IT manager by telephone on +44 (0)20 7337 8300 or via email to [EMAIL PROTECTED], attaching this message. Please then delete this email and all attachments, and destroy any copies thereof. Thank you. **************************************************************************** ***********
