Hi Rich, List
we managed to upgrade to 389-DS 1.3.4 both the ds and ds-admin , there
were some issues with missing dependency lib since we are still running
CenOS6 with last 389-DS version.
Are any post- ugrade steps for DS , ( we are using memberof plugging
and master/slave replication) , the documentation does not mention ?
just checking from other users experience.
Thank you ,
Isabella
On 12/02/2015 08:58 AM, ghiureai wrote:
Hi Rich,
Yes I totally agree I should see the prompt as you put here, this is
working in my case only when running:
setup-ds.pl -u
but not for ds-admin.
I would like to continue with this upgrade process ( i have 4 more
hosts to upgrade) is there a option to check for any missing
packages,lib etc when running setup-ds-admin.pl -u .??
The Sysadmin build the 389-ds* rmp's from scratch for this OS, I
have a feeling something may missing from ds-admin package (??) but I
need "tools/proof" to point what's missing.
OS
Linux 2.6.32-431.el6.x86_64 #1 SMP Thu Nov 21 13:35:52 CST 2013 x86_64
x86_64 x86_64 GNU/Linux
new installed 389-ds-admin
rpm -qa | grep 389-admin*
389-admin-1.1.42-000.x86_64
389-admin-console-1.1.10-000.x86_64
389-adminutil-1.1.22-000.x86_64
Thank you again
Isabella
...
<https://lists.fedoraproject.org/archives/list/389-users%40lists.fedoraproject.org/thread/PI4Z4UYJST2FNSNV43M3DLOH6SQWEUHM/#>
I don't understand what is going on. When you use setup-ds-admin.pl
-u, You should see a prompt like this:
==============================================================================
The update option will allow you to re-register your servers with the
configuration directory server and update the information about your
servers that the console and admin server uses. You will need your
configuration directory server admin ID and password to continue.
Continue?
==============================================================================
I have no idea what's wrong.
...
<https://lists.fedoraproject.org/archives/list/389-users%40lists.fedoraproject.org/thread/PI4Z4UYJST2FNSNV43M3DLOH6SQWEUHM/#>
On 12/01/2015 02:07 PM, ghiureai wrote:
Rich, still see bellow : and bellow only for ds no admin
_setup-ds-admin.pl -u -ddddd_
==============================================================================
This program will set up the 389 Directory and Administration Servers.
It is recommended that you have "root" privilege to set up the software.
Tips for using this program:
- Press "Enter" to choose the default and go to the next screen
- Type "Control-B" then "Enter" to go back to the previous screen
- Type "Control-C" to cancel the setup program
Would you like to continue with set up? [yes]:
==============================================================================
Your system has been scanned for potential problems, missing patches,
etc. The following output is a report of the items found that need to
be addressed before running this software in a production
environment.
Would you like to continue? [no]: yes
==============================================================================
Choose a setup type:
1. Express
Allows you to quickly set up the servers using the most
common options and pre-defined defaults. Useful for quick
evaluation of the products.
2. Typical
Allows you to specify common defaults and options.
3. Custom
Allows you to specify more advanced options. This is
recommended for experienced server administrators only.
To accept the default shown in brackets, press the Enter key.
**********************************************************************
_>>>>>>setup-ds.pl -u_
==============================================================================
This program will update the 389 Directory Server.
It is recommended that you have "root" privilege to perform the update.
Tips for using this program:
- Press "Enter" to choose the default and go to the next screen
- Type "Control-B" or the word "back" then "Enter" to go back to
the previous screen
- Type "Control-C" to cancel the update
Would you like to continue with update? [yes]: yes
==============================================================================
The update process can work in one of two modes:
- Online: The changes are made to the running directory servers
using LDAP.
The operations must be performed as an administrative user.
You must provide the name and password, for each instance
if there is more than one instance of directory server.
Some operations may require a directory server restart to
take
effect. The update script will notify you if you need to
restart
the server.
- Offline: The changes are made to the server configuration files. The
servers MUST FIRST BE SHUTDOWN BY YOU. The script will not
shutdown the servers for you. You MUST shutdown the
servers in order to use this mode. A username and password
are not required to use Offline mode. If the servers
are not
shutdown, CHANGES WILL BE LOST.
To summarize:
Online - servers remain running - you must provide admin name and
password
for each server - servers may need to be restarted
Offline - servers must be shutdown - no username or password required
On 12/01/2015 01:23 PM, ghiureai wrote:
On 12/01/2015 11:42 AM, ghiureai wrote:
Rich, pls see the answers to your Q's ( the DS upgrade worked but
the DS Admin set up will not behave same way )
...
<https://lists.fedoraproject.org/archives/list/389-users%40lists.fedoraproject.org/thread/PI4Z4UYJST2FNSNV43M3DLOH6SQWEUHM/#>
setup-ds-admin.pl -u
this will not give the noption for upgrade like with (setup-ds.pl -u)
see the menu bellow
setup-ds-admin.pl -u
==============================================================================
This program will set up the 389 Directory and Administration Servers.
It is recommended that you have "root" privilege to set up the software.
Tips for using this program:
- Press "Enter" to choose the default and go to the next screen
Would you like to continue with set up? [yes]:
==============================================================================
Your system has been scanned for potential problems, missing patches,
etc. The following output is a report of the items found that need to
be addressed before running this software in a production
environment.
Would you like to continue? [no]: yes
==============================================================================
Choose a setup type:
1. Express
Allows you to quickly set up the servers using the most
common options and pre-defined defaults. Useful for quick
evaluation of the products.
2 ....................................................................
...
<https://lists.fedoraproject.org/archives/list/389-users%40lists.fedoraproject.org/thread/PI4Z4UYJST2FNSNV43M3DLOH6SQWEUHM/#>
What repo are you using? What platform is this? If you are using el6
or el7 you must use epel6 or epel7 to get the admin/console packages.
...
<https://lists.fedoraproject.org/archives/list/389-users%40lists.fedoraproject.org/thread/PI4Z4UYJST2FNSNV43M3DLOH6SQWEUHM/#>
Linux 2.6.32-431.el6.x86_64 #1 SMP Thu Nov 21 13:35:52 CST 2013
x86_64 x86_64 x86_64 GNU/Linux
epel6
rpm -qa | grep 389-*
389-ds-console-1.2.12-000.x86_64
389-ds-base-1.3.4.4-000.x86_64
389-admin-1.1.42-000.x86_64
389-admin-console-1.1.10-000.x86_64
389-adminutil-1.1.22-000.x86_64
389-console-1.1.9-000.x86_64
On 12/01/2015 10:42 AM, ghiureai wrote:
Thank you Rich for reply one more related issues I see :
When need to run the ds admin update I do not see the options for
update, seems goes back and asks all the Q's as a new fresh
installation ( ??)
What we are missing from this upgrade installation here is what is been
installed
grep 389-*
389-ds-console-1.2.12-000.x86_64
389-admin-1.1.42-000.x86_64
389-ds-base-1.3.4.4-000.x86_64
389-console-1.1.9-000.x86_64
389-admin-console-1.1.10-000.x86_64
389-adminutil-1.1.22-000.x86_64
On 12/01/2015 09:07 AM, ghiureai wrote:
Hi List,
we are tying to upgrade to 389-ds 1.3.4 from 1.2.2 , after rpm installed
and update the server , when restarting the DS geting the following in
DS errorlog, there is no such "entryallowWeakCipher" in cfg file , what
should we dissable see entries for this cn
SSL alert: Cipher rsa_rc4_128_md5 is weak. It is enabled since
allowWeakCipher is "on" (default setting for the backward
compatibility). We strongly recommend to set it to "off". Please
replace the value of allowWeakCipher with "off" in the encryption config
entry cn=encryption,cn=config and restart the server.
dn: cn=encryption,cn=config
objectClass: top
objectClass: nsEncryptionConfig
cn: encryption
nsSSLSessionTimeout: 0
nsSSLClientAuth: allowed
nsSSL2: off
nsSSL3: off ----->>> This was on but turn to "off"
creatorsName: cn=server,cn=plugins,cn=config
modifiersName:
uid=admin,ou=administrators,ou=topologymanagement,o=netscaperoo
t
createTimestamp: xxxxxxxxxxxxxxxx
modifyTimestamp:xxxxxxxxxxxxxxxxxxxx
nsSSL3Ciphers:
-rsa_null_md5,-rsa_null_sha,+rsa_rc4_128_md5,+rsa_rc4_40_md5,+r
sa_rc2_40_md5,+rsa_des_sha,+rsa_fips_des_sha,+rsa_3des_sha,+rsa_fips_3des_sha
,+fortezza,+fortezza_rc4_128_sha,+fortezza_null,+tls_rsa_export1024_with_rc4_
56_sha,+tls_rsa_aes_128_sha,+tls_rsa_aes_256_sha
xxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxx
Thank you for your time
Isabella
--
389 users mailing list
389-users@%(host_name)s
http://lists.fedoraproject.org/admin/lists/389-users@lists.fedoraproject.org