This is done with SR SetPrinter
If you go to enode site, download, previous version you can find developer docs:
https://www.e-node.net/ftp/SuperReportPro/3.4.1_Previous_Version/SuperReportPro_Developer_Manual.pdf
On 6/9/21, 12:40 AM, "4D_Tech on behalf of Wayne Stewart via 4D_Tech"
<4d_tech-boun...@lists.4d.com on behalf of 4d_tech@lists.4d.com> wrote:
Peter,
Why not specify the printer immediately before the print job?
https://doc.4d.com/4Dv18/4D/18.4/SET-CURRENT-PRINTER.301-5233936.en.html
I have no experience with SuperReports.
Wayne
On Wed, 9 Jun 2021 at 17:30, Peter Adam via 4D_Tech <4d_tech@lists.4d.com>
wrote:
> I am finding that the choice of printer that I specify in my superReports
> is not being respected by Windows 10. Instead the “Default” printer is
> being used.
>
> I am looking for a way around this.
>
> I am using 4D v17R6 and SuperReports 4.2.1
>
>
>
>
> Cheers,
>
> Peter Adam
**********************************************************************
4D Internet Users Group (4D iNUG)
New Forum: https://discuss.4D.com
Archive: http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub: mailto:4d_tech-unsubscr...@lists.4d.com
**********************************************************************
