I'm inclined to think you're on the right track with a dhcp problem. It seems to be working fine if I set the address manually on the command line. The really odd part is I just moved the SD card over from a pi3 that was booting fine with dhcp. I'll keep digging.
BLS On Friday, May 28, 2021, 2:28:16 PM EDT, Richard Miller <9f...@hamnavoe.com> wrote: I have no personal experience of the pi400 but I believe the ethernet hardware is identical to the pi4. Could it be a configuration problem? Can you run snoopy or equivalent on the network segment and see if the dhcp requests are being transmitted? And check the dhcp server log to see if there's a reason for non-response? Also you can try using ipconfig to set a specific ip address and gateway without using dhcp, to see if it's a dhcp problem or a more fundamental ethernet problem. ------------------------------------------ 9fans: 9fans Permalink: https://9fans.topicbox.com/groups/9fans/T8d2c30e280421e20-M9351afac61fe9f7850128c94 Delivery options: https://9fans.topicbox.com/groups/9fans/subscription