Same situation with the same wifi-card. % pci -v ... 3.0.0: net 02.80.00 8086/08b1 4 0:a3100004 8192 Intel Corporation Wireless 7260
Firmware added and kernel rebuilded. Command: % aux/wpa -p2 -s vega3 /net/ether1 asking password, returns '!' and exits. But next command ip/ipconfig returns: ipconfig: no success with DHCP DHCP is ok. It works good with other devices. DHCP-logs on server side have not requests with wifi-card mac-address. Trying to connect to mobile phone configured as hotspot takes the same result - no success with DHCP. Manual configuring: % ip/ipconfig -g 192.168.7.1 ether /net/ether1 192.168.7.23 255.255.255.0 also not solve the situaton - ip/ping says about lost packets.. % cat /net/ether1/ifstats essid: vega3 bssid: 045ea4e8e2ac status: unassociated channel: 06 brsne: ..... ..... ..big list of available wifi-networks Tried also configure hotspot as open network, without authorization - same result, doesn't connect. What could be the problem?? вт, 21 мар. 2023 г. в 08:17, Jacob Moody <mo...@posixcafe.org>: > > On 3/21/23 00:08, zxcdew...@gmail.com wrote: > > Ok...I recompiled the kernel...and I am getting this message... > > > >> #l1: firmware: iwm-7260-17, rev 11, build 3216344376, size [3] > >> 14000+2c000 + [3] 14000+2c000 + 0 > >> iwl: no calibration results > > > > I then try the following...but get no result. > >> term% bind -a '#l1' /net > >> term% aux/wpa -2 -s MYHOMEWIFI -p /net/ether1 > > Just one more step. > > % ip/ipconfig ether /net/ether1 > > will do dhcp on the interface. > aux/wpa only associates with the access point. > ------------------------------------------ 9fans: 9fans Permalink: https://9fans.topicbox.com/groups/9fans/T9b33abcfc0b8784b-M2da80fda217d1ef128cc3cdf Delivery options: https://9fans.topicbox.com/groups/9fans/subscription
