Hello everyone, I was setting up a Plan 9 machine using the Fossil+Venti option. Everything installed well, but upon booting the new system I receive the following error:
cannot add sdC0!plan9 [63,390720960) to disk [0,268435455): partition boundaries out of range >From that point I am left with only two options, boot from fd0 or ether0. Neither being what is desired. I read the 9fans archive to find a solution but to no avail. My first guess is that the problem lies somewhere within sdata.c or 9load. Any ideas on how to correct the "partition boundaries out of range" problem? -vester P.S.- Here's some more info: 200GB hard drive. Cylinder: 65535 Heads: 16 Sectors: 255 PBS...Plan 9 from Bell Labs ELCR: 0EA0 apm ax=f000 cx=f000 dx=fdf8 di=0 ebx=7f1c esi=1fff03e4 dev A0 port 1F0 config 0C5A capabilities 2F00 mwdma 0007 udma 203F dev B0 port 170 config 85C0 capabilities 0F00 mwdma 0007 udma 0407 pcirouting: South bridge 1106, 3177 not found cannot add sdC0!plan9 [63,390720960) to disk [0,268435455): partition boundaries out of range ether#0: 21140: port 0x9000 irq 10: 0090FE00A129 Boot devices: fd0 ether0
