I would suggest looking for the problem in your apsfilter/printcap setup.
In Debian, I had better luck using magicfilter than apsfilter, so you might
consider a magicfilter printer config as part of your troubleshooting
effort.
I also think the debian-user list would be a better information resource
for shaking this problem loose. I have had excellent results with it on
printer problems.
The short answer is that the problem is not in AbiWord, in my opinion.
Good luck,
Dwight
>
>
> -----------------------------------------------
> To unsubscribe from this list, send a message to
> [EMAIL PROTECTED] with the word
> unsubscribe in the message body.
>
On Tue, 27 Feb 2001, Mark Devin wrote:
> When I try to print from abiword all I get is thick black strips where
> the words should be.
>
> I have set up printing with apsfilter and am able to print successfully
> from Netscape and the command line.
>
> I have a Canon BJC-4200 connected on /dev/printers/0 (devfs). I am
> running Debian Unstable on a 2.4.1 kernel.
>
> I have also tried getting abiword to print to a file and then later
> sending this to the printer but the same thing happens.
>
> Any pointers would be appreciated.
-----------------------------------------------
To unsubscribe from this list, send a message to
[EMAIL PROTECTED] with the word
unsubscribe in the message body.
