I had a similar problem. In my case, the hardware/software would not
recognize input unless the plug was inserted *and* sound was on the
left-channel. I had been connecting mono outputs to the stereo input on
the computer and unless I directed the mono line to the left channel (or
just combine outside the computer), input would not be recognized.
-Nikkos Svoboda
LSU Department of Mathematics
On 7/8/2011 5:33 PM, Griebel, Keith wrote:
> Hello Quang,
>
> We had a fairly similar issue with Windows 7 64bit where the audio device was
> detected in RAT but it wouldn't output anything to it, even though the meter
> was lighting up in RAT just fine. We discovered that at least with our
> particular hardware (HP Z800 onboard audio) that there had to be something
> physically plugged into the audio output jack before/while AG/RAT is opened
> in order for it to work. If we opened the software before plugging in
> headphones, speakers, line out, etc. RAT wouldn't send anything through
> Windows, but you could hear any other sounds played from other programs...
> quite odd! Maybe your hardware is similar where you need something plugged
> in before RAT is opened so it can detect it properly? You probably tried
> this already but I just thought I would mention it, even though you described
> a different issue where RAT wasn't detecting any audio device at all.
>
> Hope that helps,
> Have a good weekend!
> Keith
>
> Keith Griebel
> Communications Technician
> Classroom Technology Services
> South Dakota State University
>
> [Description: CTS Signature]
>
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Tran, Quang V.
> Sent: Thursday, July 07, 2011 9:19 PM
> To: [email protected]
> Subject: [AG-TECH] Windows 7 64bits, cannot find audio device in RAT
>
>
>
> We found this out after installing Creative Labs driver and even after we
> uninstalled all Creative software, RAT still cannot find any audio device.
> We have tried using several different sound cards without any luck.
>
> I remember there is a similar thread and wonder if anyone has found a
> solution. We plan to reformat the hard drive and install a fresh copy of
> Windoze 7.
>
> Quang
>
