hi, i'm trying to set up the h.264 enabled vic in an AG node in Kosovo for a large event tomorrow at RIT.
there are both audio and video problems but i will just try to fix the video for now. when i enable the h.264 service as the only video service at all, i get a thumbnail of not only the 264 stream but all the received streams from the venue, even though i'm not running any consumer service. and the bandwidth that goes along with it, muted or not. i'm bandwidth challenged in Kosovo, and just want to run the 264 vic only. why am i receiving video when i am not running a consumer service? can i run the 264 vic standalone from the cmd line? where is it? or how do i do that? btw, i am using bridging and can send video ok into the bridge but cannot receive any video back from the bridge. tried various bridges. finally, rat shows signal in the listen window but headphones don't pick up any audio. the windows xp system has built in MS RDP audio driver but sometimes switches to SoundMax HD, but neither seem to allow the headphones to connect to the signal RAT is obviously seeing. not an AG issue but maybe someone can give me a clue. mainly i need at least the 264 video w/o all the extra bandwidth of received videos. thanks for any insights, -gurcharan -- ------------------------- Gurcharan S. Khanna, Ph.D. Director of Research Computing Office of the Vice President for Research http://rc.rit.edu Director, Interactive Collaboration Environments Laboratory Center for the Advancing the Study of Cyberinfrastructure http://icelab.rit.edu --- Rochester Institute of Technology 1 Lomb Memorial Drive Rochester, New York 14623-5603 Phone: 585-475-7504 ~ Cell: 585-451-8370 Email: gurcharan.kha...@rit.edu Http: people.rit.edu/gskpop
