Thanks Doug. I think you misunderstand my problem for my lossy informations.
I wantto use AG H264 vic service with firewired sony cam. But, this device is detected by only UQ's vic version not AGTK vic. UQ's vic version shows 7 devices(Sony HVR-V1N, 4 x v4l-bt878 video, x11, NoiseGenerator). AGTK's vic version shows 9 devices (4 x V4L-BT878 video, 4 x V4L2-BT878 video and X11) I cannot produce H264 video with firewire device on AG. Thanks in advance /Ryu On 4/23/08, Douglas Kosovic <[email protected]<mailto:[email protected]>> wrote: Hi Ryu, I have fc7 installed server, it's dell precision 490. It has a 4-head video capture card and ieee1394 card and it's installed agtk3.1 and UQ' advanced video tool. I have seen that the sumover vic(agtk 3.1 vic) can not find the firewire device but UQ's vic can find the firewire device. /dev/raw1394 file exist and it's owner is ag user account. anybody can give some tips. or need more informations to find the solution? Jason Bell has done some doco for setting up the firewire support on Fedora 7 & 8 here: http://www.accessgrid.org/node/1099 You might want to confirm that the raw1394 driver has been setup correctly with /usr/bin/testlibraw and check that you are receiving DV isochronous channel packets by running /usr/bin/dumpiso (both of these commands come with the libraw1394 RPM). If you are seeing lots of gibberish output with dumpiso, then it is working. Cheers, Doug
