Hi Mike, > I've just tried to upgrade my Main AG node from AG3.0.2 to AG3.1 > This is my main node so its configuration is over 3 machines > Display machine XP, Audio Capture XP, Fedora for video capture. 4 Video > capture cards (OLD Hauppage) > I have the following problems. > 1. The Node Setup Wizard does not want to start up on the display > machine. (I tried the audio just to see if its the machine but it also > freezes) > 2. If I configure the node via the Client I can configure all the > machines but the Video Capture defaults to all four feeds coming from > the same video card. (video3) > I can then individually configure the cards so that I get all my feeds > I save the configuration then if I change venues it all defaults back to > just one feed. > If I configure the card on the fedora machine in the vic menu VIC does > not appear to save the configuration. > Anyone seen this this, or have any ideas.
Which Fedora version are you running? If it's Fedora Core 6 or earlier, make certain you have the latest vic installed (i.e. yum update vic, or maybe yum install vic). If you have one of the older AccessGrid-vic RPMs installed, it can't handle the changes introduced with AG 3.1 (so would most likely end up defaulting to the last videocard /dev/video3). Also if the VideoProducers are listed as /dev/video0 ... 3 instead of V4L:/dev/video0 ... 3 (or V4L2:/dev/something), you'll have to delete the VideoProducers and add them back in. Cheer, Doug