G'day John Being able to run both AG 2 and/or 3 on a multinode setup is relatively simple.
Basically what you need to be able to do is run 2.x and 3.x AGServiceManagers at the same time. On my Linux Install guide (http://www.accessgrid.org/node/879) , there is a section "Running AG2 and AG3 Service Managers Together (Multi-Node Configuration Only)" which can be found at http://www.accessgrid.org/node/889. Even though you are running Windows as the display machine, this guide is directly applicable, as it shows how to enable the user to execute either Access Grid VenueClient (which in this case will be on a windows system) without requiring to shutdown one service manager and starting the other one on your Linux system. I hope this helps. Cheers, Jason. From: john langkals [mailto:langk...@pacific.mps.ohio-state.edu] Sent: Wednesday, 2 January 2008 3:31 PM To: ag-t...@mcs.anl.gov Subject: [AG-TECH]Install AG2.x and AG3.x on a two box node? Hello AG Tech, Question: My main AG node is running the display in XP and the audio/video capture is on a Fedora Core box, as this is a dual box environment, can I install but not run simultaneously, AG 2.x and AG 3.x? I know it's easy enough on a AG PIG, but can this be extended to a dual node mixed environment setup? Thank you, John John Langkals Systems Manager Smith Seminar Room Department of Physics The Ohio State University PRB 1080 Physics Research Building 191 West Woodruff Avenue Columbus, Ohio 43210 614.292.6957 Office 614.327.3732 Cell 614.292.7557 FAX www.octs.osu.edu
