Hi Just noticed when testing VX/VB that one of my capture inputs/vic was sending a huge amount of data across Our network. Vic settings were 708 kbps/25 frames/h261. It was something around 16 to 20 mb/s and even higher so it could look like a dv stream.
reinstalling modules bt878 and bttv fixed. I'll install never vic and monitor if this happens again. I'm using ivc-200G quad capture card(four bt878 chips) on Fedora 6 kernel 2.6.20-1.2962.fc6 and vic that comes with VenueClient 3.0.2 Lassi Quoting Todd Zimmerman <[email protected]>: > Lassi Ylikojola wrote: >> Hi ! >> >> Apologies since I think I'm to blame here. On monday we had a session >> from Funet Finnish University network here in Seinäjoki to area near by >> localtime 16:30 to around 20:00. > > No need to apologize - we are offering the bridge to everyone after all ;-) > > Just wanted to make sure people were aware that sometimes networking > isn't free and to be aware of > what was up. Feel free to use the bridge in the future; however if > we consistently get high usage > from non-research / commodity Internet networks, we may be required > to block some service. > > Cheers, > > Todd > > -- > Collaboration & Visualization Technician > WestGrid - www.westgrid.ca > IRMACS - www.irmacs.com > Ph. 604.268.6979 > Todd Zimmerman - [email protected] >
