Hi Morris, Thanks for the follow up. Unfortunately, I am using a Realtek High Definition card... Although, subsequent posts suggest the card may work with RAT 4.23 so I'll give that a go.
I'm currently using 3.2 :/ Cheers, Sam Morris Lin wrote: > Hi Sam, > In my experience, RAT doesn't support some sound cards. (ex: Reltek > High Definition Card). You can use another sound card, and try it again. > > Morris > > Sam Gundry wrote: >> Hi, >> >> Audio is not quite working. (Video is working fine, yay!) >> >> That is, when I enter a room, RAT is launched fine. Also, if there is >> someone talking in the venue, my listening slider moves up and down, >> but no sound is output. I have tested my audio independent of AG and >> it is working correctly. >> >> I think the problem is in Options -> category Audio -> Audio Device. >> The only option is "No Audio Device". >> >> Apparently, from the RAT manual, "No Audio Device" appears only when >> another process is using the audio device. Although, after closing all >> programs/process that might be using the audio device, I still haven't >> had any success. >> >> Has anyone experienced anything similar to this? >> Are there any suggestions? >> >> Also, I am using the Audio Reflector accessed from Venue on APAG's >> Services Lobby. However, when I enter the room, the AudioReflector >> doesn't appear - as suggested it should here: >> http://www.accessgrid.org/node/354 >> >> Is the Audio Reflector room working properly? FYI, I am using AG 3 and >> logging into the appropriate APAG Lobby (vv3.ap-accessgrid.org). >> >> Thanks for any help, >> >> Sam >> >> >> >> > > -- Centre for Computational Prototyping Victorian Partnership for Advanced Computing www.vpac.org
