We have "control" and "audio" running on one Windows machine and "capture" and
"display" running on another. When we connect to our home venue, we notice that
we do not have audio (the video works fine). We go into the Windows "control
panel/Sounds and Audio Devices" and change the audio input from "mic in" to
line in" and the audio starts to work. If , however, we again click on "Go to
home venue" again, we loose the audio. Somehow the AG software is causing the
setting to go back to "mic in".
We were told to set it up with the "line in" selected and then go to the rat
windows and click on quit. This supposedly would cause the audio settings to be
stored in the AG audio config files. However, this did not work. Any
suggestions?.....Larry
***********************************************************************************
Larry Amiot
Northwestern University Argonne National Laboratory
NU Library 2 EAST Building 208
1970 Campus Drive 9700 South Cass Ave.
Evanston, Illinois 60208-2323 Argonne, Illinois 60439
Video: 0011169 176885 Video: 0011169 125432
Phone: 847 467 6885 Phone: 630 252 5432
FAX 847 491 4132
Email: [email protected] Email: [email protected]
***********************************************************************************
