Hi,
You cannot enter addresses and ports directly. You will either need to have someone set up the venue of their venue server, or you can run vic and rat directly. To do this, you can either download them from http://www-mice.cs.ucl.ac.uk/multimedia/software/ or locate them in your AGTk 2.3 installation (usually in AudioProducer.zip and VideoConsumer.zip in C:\Program Files\AGTk-2.3\NodeServices). You then just run: rat -t 127 233.2.171.xx/59244 vic -t 127 233.2.171.xx/59246 This will not work if you use unicast/Bridged. In this case, you will need to have someone set up a bridge for you for this venue and tell you the address/ports. Andrew :) ============================================ Access Grid Support Centre, RSS Group, Manchester Computing, Kilburn Building, University of Manchester, Oxford Road, Manchester, M13 9PL, UK Tel: +44(0)161-275 0685 Email: [email protected] _____ From: [email protected] [mailto:[email protected]] On Behalf Of Michael A Gideon Sent: 01 April 2005 18:45 To: [email protected] Subject: [AG-TECH] ToolKit to inSORS I use inSORS for Access Grid connectivity. I usually connect to other inSORS sites. I simply select a static venue from a list. Yesterday, I had to connect to a virtal AG venue and after a lot of frustration, I found out I had to go to a web site that inSORS hosts and put in the venue there. At that point I could connect with their software. So today I want to go just the opposite way. I want to initiate a venue with inSORS and try to connect to it with AGTk. I called inSORS to see how this would work. Their tech support told me to get the ip address and the Audio and Video ports. So in my example the ip is 233.2.171.xx and the audio port is 59244 video is 59246 ( I think). Now I'm poking around the AG client, but can't find a place to enter this information. Does anyone have any experience doing this? Thanks a bunch, Mike Gideon UNR
