Check when you run AGServiceManager.py that it is indeed advertised on port 12000. The newer version actually uses port 11000. You could try to telnet into that service and see if it connects ie telnet video.ag0.scd.ucar.edu 12000, if the connection is refused then I would look for firewall issues on either the display or video machines. It will probably be worth removing the service manager from the display machine and then re-add it. If all else fails run ethereal and see what the machines are trying to do.
Hope that helps Steven Steven Jack University of Glasgow -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Darin Oman Sent: 25 October 2004 17:46 To: [email protected] Subject: [AG-TECH] Service Manager problem Hello, I had to shut our AG machines down for some building maintenance over the weekend and since I brought them up this morning, I can't get the Display machine to see the service manager on the Video machine (2 machine setup). Both machines can ping each other by name and both are on the same subnet, but I still get the message "Exception: Couldn't reach service manager: video.ag0.scd.ucar.edu:12000." I can't see any problems. Does anybody have any ideas? Thanks, Darin
