Siraj, I thought I had tried this configuration. I configured my node again with only the Video Service and I can now see and send video. However, I don't know how to point to the videoservice.zip with windows. I think that is done with the node configuration. Thank you, Mike
"Sabihuddin, Siraj" wrote: > I had the same problem when I tried using both the video consumer and > producer services...each service starts up its own instance of vic. Instead > try using only the Video service "VideoService.zip" that comes with AG 2.2 - > this version should implement both the consumer and producer in one vic > instance. > > Siraj > Student Programmer > Information Security Group, Institute for Information Technology > National Research Council (NRC), Ottawa, Canada > Email: [email protected], > WWW - NRC: http://iit-iti.nrc-cnrc.gc.ca > > > -----Original Message----- > > From: [email protected] [mailto:[email protected]]On > > Behalf Of Mike Elmore > > Sent: Friday, June 04, 2004 1:10 PM > > Cc: [email protected] > > Subject: [AG-TECH] 2 intstances vic.exe > > > > > > Hello, > > I have installed 2.2 on a laptop with xp and I am able to go > > into the rooms. I > > still haven't verified the audio. When I started the venue > > client (after two > > installs) I had video consumer installed in the node. In > > order to send my video > > I had to add video producer or video service to the available > > services. They > > appeared to function identically. Now, I have two instances > > of vic.exe running > > and two windows. 1)video and 2)a window with the room name. > > The problem is that > > when I go into a room with a lot of videos, my cpu usage is > > always at or near > > 100%, which makes everything take what seems like forever > > when I change rooms > > etc,. I don't remember this happening in 2.1.2 All I had to > > do was select the > > video and select transmit to transmit my video. > > Thanks, > > Mike > > > > > > Michael Miller wrote: > > > > > Would this apply to linux as well? > > > > > > MYK > > > > > > At 11:35 AM 6/2/2004, you wrote: > > > >At 10:45 AM 6/2/2004, Frank Sweetser wrote: > > > >>I just removed AG 2.1.2 from my laptop, and then > > installed AG 2.2. I've had > > > >>two issues so far > > > >> > > > >> - The GLOBUS_HOSTNAME environmental variable was > > still set to an > > > >> old hostname. Previously, when the venue > > client started up, it > > > >> would detect that GLOBUS_HOSTNAME wasn't set > > to a hostname that > > > >> was valid for one of the interfaces and bring > > up a dialoge box > > > >> to properly set it. Now, though, various bits > > and pieces just > > > >> try to talk to a hostname that doesn't map to > > any of the local > > > >> interfaces, and isn't even up. > > > > > > > >The new code detects the hostname to be used, *unless* > > GLOBUS_HOSTNAME is > > > >set. The philosophy is that if the autodetection does not > > work properly, > > > >we're probably in an environment where the autodetection > > couldn't work > > > >(for instance, we're behind a NAT). > > > > > > > >Unfortunately, this leads us to the problem you're seeing. > > Probably the > > > >best thing to do is to go to the environment control panel > > and remove the > > > >definition of GLOBUS_HOSTNAME to allow the autodetection > > to go ahead. > > > > > > > >--bob > > > > > > Thanx, > > > > > > Michael Miller > > > System Engineer > > > Visualization Technology Support > > > Computing and Data Management > > > National Center for Supercomputing Applications > > > University of Illinois - UC > > > 217-649-0747 > > > > > > "If you're clear in your vision and trust the people in > > your team with > > > clear objectives, they will invariably do their best to > > achieve everything > > > desired, and usually deliver everything you could have > > hoped for and even > > > more." -Paul Debevec > >
<<attachment: mwelmore.vcf>>
