http://bugzilla.kernel.org/show_bug.cgi?id=5888
Summary: computer does not wake up after going to sleep, reset
button does not work
Kernel Version: 2.6.15-git7, 2.6.15-git8 2.6.15-git9
Status: NEW
Severity: normal
Owner: [EMAIL PROTECTED]
Submitter: [EMAIL PROTECTED]
Most recent kernel where this bug did not occur:
I do not know. With older kernels (last time I tried was AFAIR 2.6.11), the box
came
back after hitting the reset-button, but did not wake up on pushing the power
button, too. I
am trying additional kernels over the weekend, have to watch my net-traffic :(
Distribution:
gentoo
Hardware Environment:
Amd64 Venice core 2GHZ, Asrock 939DualSata2, Audigy2
Value, Terratec TV+, usb mouse, ps2 keyboard, Geforce 6600 card in PCIE slot
(connected to monitor), Geforce 5200 in AGP slot (not connected to anything)
cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 47
model name : AMD Athlon(tm) 64 Processor 3200+
stepping : 2
cpu MHz : 1000.000
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36
clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni
lahf_lm
bogomips : 2002.36
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc
Software Environment:
output of ver_linux:
Linux energy 2.6.15-git9 #1 Sat Jan 14 03:40:01 CET 2006 x86_64 AMD Athlon(tm)
64
Processor 3200+ AuthenticAMD GNU/Linux
Gnu C 3.4.5
Gnu make 3.80
binutils 2.16.1
util-linux 2.12r
mount 2.12r
module-init-tools 3.2.2
e2fsprogs 1.38
reiserfsprogs 3.6.19
reiser4progs line
Linux C Library 2.3.6
Dynamic linker (ldd) 2.3.6
Procps 3.2.6
Net-tools 1.60
Kbd 1.12
Sh-utils 5.3.0
udev 079
Modules Loaded nvidia agpgart w83627hf hwmon_vid eeprom i2c_isa
i2c_ali1563
snd_seq_midi snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul
snd_pcm_oss snd_mixer_oss snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq
snd_emu10k1 snd_rawmidi snd_ac97_codec snd_ac97_bus snd_pcm snd_seq_device
snd_timer snd_page_alloc snd_util_mem snd_hwdep snd ehci_hcd ohci_hcd tuner
bttv
video_buf compat_ioctl32 i2c_algo_bit v4l2_common btcx_risc ir_common tveeprom
i2c_core videodev uli526x
I ran the script after starting X. When I try to set the computer into sleep
mode, the nvidia
module is not loaded (!) (not even built and installed) and X not started.
Problem Description:
After doing an 'echo mem > /sys/power/state' the computer goes
down and never comes back. It reacts on pushing the power button with flashing
the drives
lights, same with the reset button, but the monitor does not get any signals
and keyboard is
dead. Shutting down with the power button is possible (tried with git7) but the
box still does
not come back after that. The only way to get it working again is to remove
power to the
computer and force a cold boot that way (on on power loss is activated in
bios). There is
nothing in the logs. I did not try to set up a serial console, because I do not
have a spare
computer.
Steps to reproduce:
boot into new kernel (ie, normal boot).
Do not start X, do not load nvidia module.
echo mem > /sys/power/state (or echo 'mem' > /sys/power/state)
computer goes to sleep, Monitor goes into standby, keyboard is dead, usb mouse
still has
power.
computer reacts on pushing the power button with flashing of the harddrive and
dvd-drives
LEDs, nothing else happens, Monitor still in standby, keyboard dead
computer reacts on pushing the reset button with flashing the drives LEDs.
Nothing else
happens.
Pull the plug and put it back and the computer boots up normaly.
This is dmesg output immidiatly before doing the echo:
[ 0.000000] Bootdata ok (command line is root=/dev/hda3 gentoo=nodevfs
noexec=on
nmi_watchdog=1)
[ 0.000000] Linux version 2.6.15-git9 ([EMAIL PROTECTED]) (gcc-Version 3.4.5
(Gentoo 3.4.5,
ssp-3.4.5-1.0, pie-8.7.9)) #1 Sat Jan 14 03:40:01 CET 2006
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @
0x00000000000f9b60
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x08000526 MSFT
0x00000097) @ 0x000000003ffb0000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x08000526 MSFT
0x00000097) @ 0x000000003ffb0200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x08000526 MSFT
0x00000097) @ 0x000000003ffb0390
[ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x08000526 MSFT
0x00000097) @ 0x000000003ffc0040
[ 0.000000] ACPI: DSDT (v001 939M2 939M2120 0x00000120 INTL
0x02002026) @ 0x0000000000000000
[ 0.000000] On node 0 totalpages: 257489
[ 0.000000] DMA zone: 3047 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 254442 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages, LIFO batch:0
[ 0.000000] HighMem zone: 0 pages, LIFO batch:0
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:15 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec10000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 2, version 17, address 0xfec10000, GSI 24-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:bf7c0000)
[ 0.000000] Built 1 zonelists
[ 0.000000] Kernel command line: root=/dev/hda3 gentoo=nodevfs noexec=on
nmi_watchdog=1
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes)
[ 0.000000] time.c: Using 3.579545 MHz PM timer.
[ 0.000000] time.c: Detected 2000.107 MHz processor.
[ 20.887450] time.c: Using PIT/TSC based timekeeping.
[ 20.889530] Console: colour VGA+ 80x25
[ 20.891618] Dentry cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 20.892816] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 20.893043] PCI-DMA: Disabling IOMMU.
[ 20.902690] Memory: 1027968k/1048256k available (1965k kernel code, 19620k
reserved, 937k data, 156k init)
[ 20.981276] Calibrating delay using timer specific routine.. 4004.73
BogoMIPS
(lpj=8009478)
[ 20.981397] Mount-cache hash table entries: 256
[ 20.981521] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 20.981570] CPU: L2 Cache: 512K (64 bytes/line)
[ 20.981621] mtrr: v2.0 (20020519)
[ 20.981666] CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 02
[ 21.029870] activating NMI Watchdog ... done.
[ 21.029949] Using local APIC timer interrupts.
[ 21.079897] Detected 12.500 MHz APIC timer.
[ 21.081096] testing NMI watchdog ... OK.
[ 21.121435] DMI 2.3 present.
[ 21.121516] NET: Registered protocol family 16
[ 21.121579] ACPI: bus type pci registered
[ 21.121628] PCI: Using configuration type 1
[ 21.121948] ACPI: Subsystem revision 20050902
[ 21.127493] ACPI: Interpreter enabled
[ 21.127539] ACPI: Using IOAPIC for interrupt routing
[ 21.128172] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 21.128219] PCI: Probing PCI hardware (bus 00)
[ 21.130304] PCI quirk: region 0800-083f claimed by ali7101 ACPI
[ 21.130659] Boot video device is 0000:01:00.0
[ 21.130952] PCI: Transparent bridge - 0000:00:06.0
[ 21.131027] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 21.143274] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 21.143500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT]
[ 21.147456] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT]
[ 21.147650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT]
[ 21.148283] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 21.148945] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 21.149633] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14
15),
disabled.
[ 21.150329] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14
15),
disabled.
[ 21.151030] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 21.151687] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 21.152346] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 21.153012] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15)
*9
[ 21.153707] ACPI: PCI Interrupt Link [LNKP] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 21.154271] SCSI subsystem initialized
[ 21.154345] usbcore: registered new driver usbfs
[ 21.154415] usbcore: registered new driver hub
[ 21.154493] PCI: Using ACPI for IRQ routing
[ 21.154539] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 21.155362] PCI: Bridge: 0000:00:01.0
[ 21.155407] IO window: disabled.
[ 21.155453] MEM window: f2700000-fc7fffff
[ 21.155499] PREFETCH window: a7e00000-c7dfffff
[ 21.155546] PCI: Bridge: 0000:00:02.0
[ 21.155590] IO window: disabled.
[ 21.155635] MEM window: fc800000-fc8fffff
[ 21.155681] PREFETCH window: disabled.
[ 21.155727] PCI: Bridge: 0000:00:05.0
[ 21.155771] IO window: disabled.
[ 21.155818] MEM window: fc900000-fe9fffff
[ 21.155865] PREFETCH window: c7e00000-d7dfffff
[ 21.155913] PCI: Bridge: 0000:00:06.0
[ 21.155959] IO window: d000-dfff
[ 21.156006] MEM window: fea00000-feafffff
[ 21.156053] PREFETCH window: d7e00000-d7efffff
[ 21.156112] GSI 16 sharing vector 0xA9 and IRQ 16
[ 21.156159] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 29 (level, low) ->
IRQ 169
[ 21.156249] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 21.156256] GSI 17 sharing vector 0xB1 and IRQ 17
[ 21.156302] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 34 (level, low) ->
IRQ 177
[ 21.156391] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 21.156397] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 21.156404] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 21.156627] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp
$
[ 21.157113] Total HugeTLB memory allocated, 0
[ 21.157260] io scheduler noop registered
[ 21.157336] io scheduler anticipatory registered
[ 21.157414] io scheduler deadline registered
[ 21.157495] io scheduler cfq registered
[ 21.158245] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 29 (level, low) ->
IRQ 169
[ 21.158339] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 21.158360] assign_interrupt_mode Found MSI capability
[ 21.158437] Allocate Port Service[0000:00:01.0:pcie00]
[ 21.158468] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 34 (level, low) ->
IRQ 177
[ 21.158558] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 21.158579] assign_interrupt_mode Found MSI capability
[ 21.158644] Allocate Port Service[0000:00:02.0:pcie00]
[ 21.158725] ACPI: Power Button (FF) [PWRF]
[ 21.158780] ACPI: Power Button (CM) [PWRB]
[ 21.170600] Real Time Clock Driver v1.12ac
[ 21.172376] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 21.172566] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 21.172691] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 21.172740] ide: Assuming 33MHz system bus speed for PIO modes; override
with
idebus=xx
[ 21.172833] ALI15X3: IDE controller at PCI slot 0000:00:12.0
[ 21.172888] GSI 18 sharing vector 0xD1 and IRQ 18
[ 21.173460] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 19 (level, low) ->
IRQ 209
[ 21.173557] ALI15X3: chipset revision 199
[ 21.173602] ALI15X3: not 100% native mode: will probe irqs later
[ 21.173661] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA,
hdb:pio
[ 21.173787] ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA,
hdd:pio
[ 21.173910] Probing IDE interface ide0...
[ 21.460578] hda: SAMSUNG SP1213N, ATA DISK drive
[ 22.131253] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 22.131378] Probing IDE interface ide1...
[ 22.865957] hdc: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive
[ 23.536601] ide1 at 0x170-0x177,0x376 on irq 15
[ 23.536780] hda: max request size: 512KiB
[ 23.538676] hda: 234493056 sectors (120060 MB) w/8192KiB Cache,
CHS=16383/255/63, UDMA(100)
[ 23.539210] hda: cache flushes supported
[ 23.539285] hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
[ 23.582079] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache,
UDMA(33)
[ 23.582373] Uniform CD-ROM driver Revision: 3.20
[ 23.583559] usbmon: debugfs is not available
[ 23.583620] usbcore: registered new driver usbhid
[ 23.583666] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 23.583749] mice: PS/2 mouse device common for all mice
[ 23.583830] NET: Registered protocol family 2
[ 23.616395] IP route cache hash table entries: 32768 (order: 6, 262144
bytes)
[ 23.616657] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 23.617490] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 23.617897] TCP: Hash tables configured (established 131072 bind 65536)
[ 23.617946] TCP reno registered
[ 23.618009] TCP bic registered
[ 23.618067] NET: Registered protocol family 1
[ 23.618117] NET: Registered protocol family 17
[ 23.618166] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version
1.60.0)
[ 23.618324] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6 (1400 mV)
[ 23.618372] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8 (1350 mV)
[ 23.618421] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0xa (1300 mV)
[ 23.618471] cpu_init done, current fid 0xc, vid 0x6
[ 23.618615] ACPI wakeup devices:
[ 23.618659] HTT PS2K AC97 MC97 LAN USB0 USB1 USB2 UB20 PEB1 PEB2
PEB3
[ 23.619060] ACPI: (supports S0 S1 S3 S4 S5)
[ 23.639007] ReiserFS: hda3: found reiserfs format "3.6" with standard
journal
[ 23.854770] input: AT Translated Set 2 keyboard as /class/input/input0
[ 27.272776] ReiserFS: hda3: using ordered data mode
[ 27.285166] ReiserFS: hda3: journal params: device hda3, size 8192, journal
first block
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 27.286856] ReiserFS: hda3: checking transaction log (hda3)
[ 27.349801] ReiserFS: hda3: replayed 10 transactions in 0 seconds
[ 27.376624] ReiserFS: hda3: Using r5 hash to sort names
[ 27.376685] VFS: Mounted root (reiserfs filesystem) readonly.
[ 27.376829] Freeing unused kernel memory: 156k freed
[ 30.887353] Adding 996020k swap on /dev/hda2. Priority:-1 extents:1
across:996020k
[ 31.296252] ReiserFS: hda3: Removing [344649 127382 0x0 SD]..done
[ 31.296314] ReiserFS: hda3: Removing [344649 120715 0x0 SD]..done
[ 31.296352] ReiserFS: hda3: Removing [344649 119965 0x0 SD]..done
[ 31.296385] ReiserFS: hda3: There were 3 uncompleted unlinks/truncates.
Completed
[ 31.921984] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[ 31.922217] GSI 19 sharing vector 0xD9 and IRQ 19
[ 31.922220] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 17 (level, low) ->
IRQ 217
[ 31.944501] eth0: ULi M5263 at pci0000:00:11.0, 00:13:8f:3f:bf:15, irq 217.
[ 31.974427] Linux video capture interface: v1.00
[ 32.117137] bttv: driver version 0.9.16 loaded
[ 32.117141] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 32.117367] bttv: Bt8xx card found (0).
[ 32.117380] GSI 20 sharing vector 0xE1 and IRQ 20
[ 32.117383] ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 21 (level, low) ->
IRQ 225
[ 32.117393] bttv0: Bt848 (rev 18) at 0000:04:06.0, irq: 225, latency: 32,
mmio:
0xd7eff000
[ 32.117403] bttv0: using: Terratec TerraTV+ Version 1.0 (Bt848)/ Terra
TValue
Version 1.0/ Vobis TV-Boostar [card=25,insmod option]
[ 32.117436] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
[ 33.118637] bttv0: tea5757: read timeout
[ 33.118641] bttv0: using tuner=5
[ 33.118645] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[ 33.120782] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[ 33.122904] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[ 33.125024] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[ 33.155164] tuner 0-0060: All bytes are equal. It is not a TEA5767
[ 33.155168] tuner 0-0060: chip found @ 0xc0 (bt848 #0 [sw])
[ 33.155417] tuner 0-0060: type set to 5 (Philips PAL_BG (FI1216 and
compatibles))
[ 33.191348] bttv0: registered device video0
[ 33.191427] bttv0: registered device vbi0
[ 33.229044] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI)
Driver
(PCI)
[ 33.229276] GSI 21 sharing vector 0xE9 and IRQ 21
[ 33.229279] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 20 (level, low) ->
IRQ 233
[ 33.229445] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 33.229883] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus
number 1
[ 33.229896] ohci_hcd 0000:00:13.0: irq 233, io mem 0xfebfe000
[ 33.284632] usb usb1: configuration #1 chosen from 1 choice
[ 33.284721] hub 1-0:1.0: USB hub found
[ 33.284731] hub 1-0:1.0: 3 ports detected
[ 33.386308] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 21 (level, low) ->
IRQ 225
[ 33.386412] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 33.386744] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus
number 2
[ 33.386752] ohci_hcd 0000:00:13.1: irq 225, io mem 0xfebfd000
[ 33.444380] usb usb2: configuration #1 chosen from 1 choice
[ 33.444479] hub 2-0:1.0: USB hub found
[ 33.444489] hub 2-0:1.0: 3 ports detected
[ 33.545991] GSI 22 sharing vector 0x32 and IRQ 22
[ 33.545995] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 22 (level, low) ->
IRQ 50
[ 33.546098] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 33.546428] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 3
[ 33.546441] ohci_hcd 0000:00:13.2: irq 50, io mem 0xfebfc000
[ 33.604024] usb usb3: configuration #1 chosen from 1 choice
[ 33.604122] hub 3-0:1.0: USB hub found
[ 33.604132] hub 3-0:1.0: 3 ports detected
[ 33.641658] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 33.793147] GSI 23 sharing vector 0x3A and IRQ 23
[ 33.793151] ACPI: PCI Interrupt 0000:00:13.3[D] -> GSI 23 (level, low) ->
IRQ 58
[ 33.793312] ehci_hcd 0000:00:13.3: EHCI Host Controller
[ 33.793347] ehci_hcd 0000:00:13.3: debug port 1
[ 33.806346] usb 1-1: configuration #1 chosen from 1 choice
[ 33.812378] hub 1-1:1.0: USB hub found
[ 33.815340] hub 1-1:1.0: 4 ports detected
[ 33.860406] ehci_hcd 0000:00:13.3: new USB bus registered, assigned bus
number 4
[ 33.860420] ehci_hcd 0000:00:13.3: irq 58, io mem 0xfebff800
[ 33.860429] ehci_hcd 0000:00:13.3: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 33.860710] usb usb4: configuration #1 chosen from 1 choice
[ 33.860805] hub 4-0:1.0: USB hub found
[ 33.860814] hub 4-0:1.0: 8 ports detected
[ 33.942139] usb 1-1: USB disconnect, address 2
[ 34.647779] usb 1-1: new full speed USB device using ohci_hcd and address 3
[ 34.812442] usb 1-1: configuration #1 chosen from 1 choice
[ 34.818448] hub 1-1:1.0: USB hub found
[ 34.821423] hub 1-1:1.0: 4 ports detected
[ 35.160796] usb 1-1.3: new low speed USB device using ohci_hcd and address 4
[ 35.265597] usb 1-1.3: configuration #1 chosen from 1 choice
[ 35.280622] input: HID 062a:0000 as /class/input/input1
[ 35.280656] input: USB HID v1.10 Mouse [HID 062a:0000] on
usb-0000:00:13.0-1.3
[ 39.353678] ReiserFS: hda5: found reiserfs format "3.6" with standard
journal
[ 42.407688] ReiserFS: hda5: using ordered data mode
[ 42.426677] ReiserFS: hda5: journal params: device hda5, size 8192, journal
first block
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 42.428218] ReiserFS: hda5: checking transaction log (hda5)
[ 42.493281] ReiserFS: hda5: Using r5 hash to sort names
[ 46.273706] ACPI: PCI Interrupt 0000:04:07.0[A] -> GSI 22 (level, low) ->
IRQ 50
[ 46.277273] Audigy2 value: Special config.
[ 54.235525] uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
[ 54.817290] ali1563: SMBus control = 0403
[ 54.825968] ali1563_probe: Returning 0
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
acpi-bugzilla mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
