http://bugzilla.kernel.org/show_bug.cgi?id=5888
------- Additional Comments From [EMAIL PROTECTED] 2006-01-16 07:43 -------
Hi,
echo standby > /sys/power/state came back to work after hitting the power
button.
But:
the monitor did not go down this time
the onboard nic did not work after this.
The fans were not shut down.
here is dmesg:
[ 0.000000] Bootdata ok (command line is root=/dev/hda3 gentoo=nodevfs
noexec=on
nmi_watchdog=1)
[ 0.000000] Linux version 2.6.15-git9 ([EMAIL PROTECTED]) (gcc-Version 3.4.5
(Gentoo 3.4.5,
ssp-3.4.5-1.0, pie-8.7.9)) #1 Sat Jan 14 03:40:01 CET 2006
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @
0x00000000000f9b60
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x08000526 MSFT
0x00000097) @ 0x000000003ffb0000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x08000526 MSFT
0x00000097) @ 0x000000003ffb0200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x08000526 MSFT
0x00000097) @ 0x000000003ffb0390
[ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x08000526 MSFT
0x00000097) @ 0x000000003ffc0040
[ 0.000000] ACPI: DSDT (v001 939M2 939M2120 0x00000120 INTL
0x02002026) @ 0x0000000000000000
[ 0.000000] On node 0 totalpages: 257489
[ 0.000000] DMA zone: 3047 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 254442 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages, LIFO batch:0
[ 0.000000] HighMem zone: 0 pages, LIFO batch:0
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:15 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec10000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 2, version 17, address 0xfec10000, GSI 24-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:bf7c0000)
[ 0.000000] Built 1 zonelists
[ 0.000000] Kernel command line: root=/dev/hda3 gentoo=nodevfs noexec=on
nmi_watchdog=1
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes)
[ 0.000000] time.c: Using 3.579545 MHz PM timer.
[ 0.000000] time.c: Detected 2000.138 MHz processor.
[ 29.832803] time.c: Using PIT/TSC based timekeeping.
[ 29.834881] Console: colour VGA+ 80x25
[ 29.836970] Dentry cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 29.838169] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 29.838397] PCI-DMA: Disabling IOMMU.
[ 29.848047] Memory: 1027968k/1048256k available (1965k kernel code, 19620k
reserved, 937k data, 156k init)
[ 29.926628] Calibrating delay using timer specific routine.. 4004.72
BogoMIPS
(lpj=8009456)
[ 29.926749] Mount-cache hash table entries: 256
[ 29.926873] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 29.926922] CPU: L2 Cache: 512K (64 bytes/line)
[ 29.926973] mtrr: v2.0 (20020519)
[ 29.927018] CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 02
[ 29.975241] activating NMI Watchdog ... done.
[ 29.975320] Using local APIC timer interrupts.
[ 30.025268] Detected 12.500 MHz APIC timer.
[ 30.026444] testing NMI watchdog ... OK.
[ 30.066783] DMI 2.3 present.
[ 30.066864] NET: Registered protocol family 16
[ 30.066927] ACPI: bus type pci registered
[ 30.066977] PCI: Using configuration type 1
[ 30.067297] ACPI: Subsystem revision 20050902
[ 30.072843] ACPI: Interpreter enabled
[ 30.072889] ACPI: Using IOAPIC for interrupt routing
[ 30.073522] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 30.073568] PCI: Probing PCI hardware (bus 00)
[ 30.075652] PCI quirk: region 0800-083f claimed by ali7101 ACPI
[ 30.076008] Boot video device is 0000:01:00.0
[ 30.076300] PCI: Transparent bridge - 0000:00:06.0
[ 30.076374] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 30.088621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 30.088847] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT]
[ 30.092804] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT]
[ 30.092997] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT]
[ 30.093620] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 30.094282] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 30.094969] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14
15),
disabled.
[ 30.095664] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14
15),
disabled.
[ 30.096365] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 30.097021] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 30.097680] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 30.098345] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15)
*9
[ 30.099040] ACPI: PCI Interrupt Link [LNKP] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 30.099604] SCSI subsystem initialized
[ 30.099678] usbcore: registered new driver usbfs
[ 30.099748] usbcore: registered new driver hub
[ 30.099826] PCI: Using ACPI for IRQ routing
[ 30.099872] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 30.100694] PCI: Bridge: 0000:00:01.0
[ 30.100739] IO window: disabled.
[ 30.100785] MEM window: f2700000-fc7fffff
[ 30.100831] PREFETCH window: a7e00000-c7dfffff
[ 30.100878] PCI: Bridge: 0000:00:02.0
[ 30.100922] IO window: disabled.
[ 30.100967] MEM window: fc800000-fc8fffff
[ 30.101013] PREFETCH window: disabled.
[ 30.101058] PCI: Bridge: 0000:00:05.0
[ 30.101102] IO window: disabled.
[ 30.101149] MEM window: fc900000-fe9fffff
[ 30.101196] PREFETCH window: c7e00000-d7dfffff
[ 30.101245] PCI: Bridge: 0000:00:06.0
[ 30.101290] IO window: d000-dfff
[ 30.101337] MEM window: fea00000-feafffff
[ 30.101384] PREFETCH window: d7e00000-d7efffff
[ 30.101443] GSI 16 sharing vector 0xA9 and IRQ 16
[ 30.101490] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 29 (level, low) ->
IRQ 169
[ 30.101581] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 30.101587] GSI 17 sharing vector 0xB1 and IRQ 17
[ 30.101633] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 34 (level, low) ->
IRQ 177
[ 30.101723] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 30.101729] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 30.101735] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 30.101959] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp
$
[ 30.102447] Total HugeTLB memory allocated, 0
[ 30.102596] io scheduler noop registered
[ 30.102672] io scheduler anticipatory registered
[ 30.102750] io scheduler deadline registered
[ 30.102830] io scheduler cfq registered
[ 30.103579] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 29 (level, low) ->
IRQ 169
[ 30.103673] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 30.103695] assign_interrupt_mode Found MSI capability
[ 30.103772] Allocate Port Service[0000:00:01.0:pcie00]
[ 30.103802] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 34 (level, low) ->
IRQ 177
[ 30.103892] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 30.103913] assign_interrupt_mode Found MSI capability
[ 30.103978] Allocate Port Service[0000:00:02.0:pcie00]
[ 30.104061] ACPI: Power Button (FF) [PWRF]
[ 30.104115] ACPI: Power Button (CM) [PWRB]
[ 30.115758] Real Time Clock Driver v1.12ac
[ 30.117430] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 30.117670] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 30.117795] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 30.117845] ide: Assuming 33MHz system bus speed for PIO modes; override
with
idebus=xx
[ 30.117938] ALI15X3: IDE controller at PCI slot 0000:00:12.0
[ 30.117994] GSI 18 sharing vector 0xD1 and IRQ 18
[ 30.118041] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 19 (level, low) ->
IRQ 209
[ 30.118136] ALI15X3: chipset revision 199
[ 30.118181] ALI15X3: not 100% native mode: will probe irqs later
[ 30.118237] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA,
hdb:pio
[ 30.118899] ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA,
hdd:pio
[ 30.119021] Probing IDE interface ide0...
[ 30.405930] hda: SAMSUNG SP1213N, ATA DISK drive
[ 31.076581] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 31.076706] Probing IDE interface ide1...
[ 31.811308] hdc: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive
[ 32.481953] ide1 at 0x170-0x177,0x376 on irq 15
[ 32.482134] hda: max request size: 512KiB
[ 32.484014] hda: 234493056 sectors (120060 MB) w/8192KiB Cache,
CHS=16383/255/63, UDMA(100)
[ 32.484510] hda: cache flushes supported
[ 32.484585] hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
[ 32.524139] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache,
UDMA(33)
[ 32.524433] Uniform CD-ROM driver Revision: 3.20
[ 32.525605] usbmon: debugfs is not available
[ 32.525666] usbcore: registered new driver usbhid
[ 32.525713] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 32.525804] mice: PS/2 mouse device common for all mice
[ 32.525885] NET: Registered protocol family 2
[ 32.565740] IP route cache hash table entries: 32768 (order: 6, 262144
bytes)
[ 32.566002] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 32.566838] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 32.567246] TCP: Hash tables configured (established 131072 bind 65536)
[ 32.567295] TCP reno registered
[ 32.567357] TCP bic registered
[ 32.567414] NET: Registered protocol family 1
[ 32.567463] NET: Registered protocol family 17
[ 32.567512] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version
1.60.0)
[ 32.567668] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6 (1400 mV)
[ 32.567717] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8 (1350 mV)
[ 32.567765] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0xa (1300 mV)
[ 32.567815] cpu_init done, current fid 0xc, vid 0x6
[ 32.567959] ACPI wakeup devices:
[ 32.568004] HTT PS2K AC97 MC97 LAN USB0 USB1 USB2 UB20 PEB1 PEB2
PEB3
[ 32.568404] ACPI: (supports S0 S1 S3 S4 S5)
[ 32.589394] ReiserFS: hda3: found reiserfs format "3.6" with standard
journal
[ 32.795953] input: AT Translated Set 2 keyboard as /class/input/input0
[ 36.081878] ReiserFS: hda3: using ordered data mode
[ 36.094267] ReiserFS: hda3: journal params: device hda3, size 8192, journal
first block
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 36.095940] ReiserFS: hda3: checking transaction log (hda3)
[ 36.152554] ReiserFS: hda3: Using r5 hash to sort names
[ 36.152619] VFS: Mounted root (reiserfs filesystem) readonly.
[ 36.152796] Freeing unused kernel memory: 156k freed
[ 39.660547] Adding 996020k swap on /dev/hda2. Priority:-1 extents:1
across:996020k
[ 40.706223] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[ 40.706450] GSI 19 sharing vector 0xD9 and IRQ 19
[ 40.706454] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 17 (level, low) ->
IRQ 217
[ 40.728740] eth0: ULi M5263 at pci0000:00:11.0, 00:13:8f:3f:bf:15, irq 217.
[ 40.758664] Linux video capture interface: v1.00
[ 40.901356] bttv: driver version 0.9.16 loaded
[ 40.901360] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 40.901579] bttv: Bt8xx card found (0).
[ 40.901592] GSI 20 sharing vector 0xE1 and IRQ 20
[ 40.901595] ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 21 (level, low) ->
IRQ 225
[ 40.901606] bttv0: Bt848 (rev 18) at 0000:04:06.0, irq: 225, latency: 32,
mmio:
0xd7eff000
[ 40.901615] bttv0: using: Terratec TerraTV+ Version 1.0 (Bt848)/ Terra
TValue
Version 1.0/ Vobis TV-Boostar [card=25,insmod option]
[ 40.901650] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
[ 41.900305] bttv0: tea5757: read timeout
[ 41.900309] bttv0: using tuner=5
[ 41.900312] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[ 41.902449] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[ 41.904577] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[ 41.906768] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[ 42.064139] tuner 0-0060: All bytes are equal. It is not a TEA5767
[ 42.064143] tuner 0-0060: chip found @ 0xc0 (bt848 #0 [sw])
[ 42.064380] tuner 0-0060: type set to 5 (Philips PAL_BG (FI1216 and
compatibles))
[ 42.100418] bttv0: registered device video0
[ 42.100494] bttv0: registered device vbi0
[ 42.212879] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI)
Driver
(PCI)
[ 42.213102] GSI 21 sharing vector 0xE9 and IRQ 21
[ 42.213106] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 20 (level, low) ->
IRQ 233
[ 42.213271] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 42.213707] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus
number 1
[ 42.213719] ohci_hcd 0000:00:13.0: irq 233, io mem 0xfebfe000
[ 42.270030] usb usb1: configuration #1 chosen from 1 choice
[ 42.270121] hub 1-0:1.0: USB hub found
[ 42.270131] hub 1-0:1.0: 3 ports detected
[ 42.371586] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 21 (level, low) ->
IRQ 225
[ 42.371687] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 42.372014] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus
number 2
[ 42.372021] ohci_hcd 0000:00:13.1: irq 225, io mem 0xfebfd000
[ 42.429737] usb usb2: configuration #1 chosen from 1 choice
[ 42.429833] hub 2-0:1.0: USB hub found
[ 42.429843] hub 2-0:1.0: 3 ports detected
[ 42.531493] GSI 22 sharing vector 0x32 and IRQ 22
[ 42.531497] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 22 (level, low) ->
IRQ 50
[ 42.531595] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 42.531922] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 3
[ 42.531935] ohci_hcd 0000:00:13.2: irq 50, io mem 0xfebfc000
[ 42.589418] usb usb3: configuration #1 chosen from 1 choice
[ 42.589519] hub 3-0:1.0: USB hub found
[ 42.589530] hub 3-0:1.0: 3 ports detected
[ 42.626939] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 42.721464] GSI 23 sharing vector 0x3A and IRQ 23
[ 42.721469] ACPI: PCI Interrupt 0000:00:13.3[D] -> GSI 23 (level, low) ->
IRQ 58
[ 42.721628] ehci_hcd 0000:00:13.3: EHCI Host Controller
[ 42.721662] ehci_hcd 0000:00:13.3: debug port 1
[ 42.791630] usb 1-1: configuration #1 chosen from 1 choice
[ 42.797652] hub 1-1:1.0: USB hub found
[ 42.800630] hub 1-1:1.0: 4 ports detected
[ 42.832181] ehci_hcd 0000:00:13.3: new USB bus registered, assigned bus
number 4
[ 42.832195] ehci_hcd 0000:00:13.3: irq 58, io mem 0xfebff800
[ 42.832203] ehci_hcd 0000:00:13.3: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 42.832483] usb usb4: configuration #1 chosen from 1 choice
[ 42.832583] hub 4-0:1.0: USB hub found
[ 42.832592] hub 4-0:1.0: 8 ports detected
[ 42.927425] usb 1-1: USB disconnect, address 2
[ 43.633054] usb 1-1: new full speed USB device using ohci_hcd and address 3
[ 43.797712] usb 1-1: configuration #1 chosen from 1 choice
[ 43.803718] hub 1-1:1.0: USB hub found
[ 43.806694] hub 1-1:1.0: 4 ports detected
[ 44.146047] usb 1-1.3: new low speed USB device using ohci_hcd and address 4
[ 44.250845] usb 1-1.3: configuration #1 chosen from 1 choice
[ 44.265851] input: HID 062a:0000 as /class/input/input1
[ 44.265880] input: USB HID v1.10 Mouse [HID 062a:0000] on
usb-0000:00:13.0-1.3
[ 47.698682] ReiserFS: hda5: found reiserfs format "3.6" with standard
journal
[ 50.759742] ReiserFS: hda5: using ordered data mode
[ 50.778732] ReiserFS: hda5: journal params: device hda5, size 8192, journal
first block
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 50.780296] ReiserFS: hda5: checking transaction log (hda5)
[ 50.853654] ReiserFS: hda5: Using r5 hash to sort names
[ 55.283082] ACPI: PCI Interrupt 0000:04:07.0[A] -> GSI 22 (level, low) ->
IRQ 50
[ 55.286650] Audigy2 value: Special config.
[ 63.160904] uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
[ 63.626933] ali1563: SMBus control = 0403
[ 63.635528] ali1563_probe: Returning 0
[ 81.982500] Stopping tasks: ===========================|
[ 82.126839] ACPI: PCI interrupt for device 0000:04:07.0 disabled
[ 82.126884] ACPI: PCI interrupt for device 0000:04:06.0 disabled
[ 82.126942] ACPI: PCI interrupt for device 0000:00:13.3 disabled
[ 82.134835] ACPI: PCI interrupt for device 0000:00:13.2 disabled
[ 82.134864] ACPI: PCI interrupt for device 0000:00:13.1 disabled
[ 82.134893] ACPI: PCI interrupt for device 0000:00:13.0 disabled
[ 90.885699] Back to C!
[ 90.968167] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 29 (level, low) ->
IRQ 169
[ 90.968207] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 90.968237] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 34 (level, low) ->
IRQ 177
[ 90.968277] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 90.968318] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 90.968351] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 90.968398] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 17 (level, low) ->
IRQ 217
[ 90.968445] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 19 (level, low) ->
IRQ 209
[ 90.968485] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 20 (level, low) ->
IRQ 233
[ 90.968532] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 21 (level, low) ->
IRQ 225
[ 90.968580] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 22 (level, low) ->
IRQ 50
[ 90.970029] BUG: soft lockup detected on CPU#0!
[ 90.970049] CPU 0:
[ 90.970082] Modules linked in: w83627hf hwmon_vid eeprom i2c_isa i2c_ali1563
snd_seq_midi snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul
snd_pcm_oss snd_mixer_oss snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq
snd_emu10k1 snd_rawmidi snd_ac97_codec snd_ac97_bus snd_pcm snd_seq_device
snd_timer snd_page_alloc snd_util_mem snd_hwdep snd ehci_hcd ohci_hcd tuner
bttv
video_buf compat_ioctl32 i2c_algo_bit v4l2_common btcx_risc ir_common tveeprom
i2c_core videodev uli526x
[ 90.970815] Pid: 0, comm: swapper Not tainted 2.6.15-git9 #1
[ 90.970841] RIP: 0010:[<ffffffff8010ccfa>]
<ffffffff8010ccfa>{default_idle+42}
[ 90.970888] RSP: 0018:ffffffff80453f78 EFLAGS: 00000246
[ 90.970935] RAX: 0000000000000000 RBX: ffffffff802e7274 RCX:
ffffffff80341060
[ 90.970963] RDX: 0000000000000000 RSI: 0000000000000001 RDI:
ffffffff803de9d8
[ 90.970990] RBP: 000000152e27355a R08: ffffffff80452000 R09:
0000000000000000
[ 90.971018] R10: 000000000000009b R11: ffffffff80291770 R12:
0000000000000000
[ 90.971046] R13: 00000000ffff2c58 R14: ffffffff80345080 R15:
ffff81003fbb5080
[ 90.971074] FS: 00002aaaab0486e0(0000) GS:ffffffff8044c000(0000)
knlGS:0000000000000000
[ 90.971107] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[ 90.971134] CR2: 00002aaaab14d000 CR3: 000000003d681000 CR4:
00000000000006e0
[ 90.971160]
[ 90.971161] Call Trace: <ffffffff8010ce24>{cpu_idle+68}
<ffffffff804547cf>{start_kernel+399}
[ 90.971280] <ffffffff80454283>{_sinittext+643}
[ 90.971507] PCI: Enabling device 0000:00:13.3 (0000 -> 0002)
[ 90.971533] ACPI: PCI Interrupt 0000:00:13.3[D] -> GSI 23 (level, low) ->
IRQ 58
[ 90.971583] PCI: Setting latency timer of device 0000:00:13.3 to 64
[ 90.971649] ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 21 (level, low) ->
IRQ 225
[ 90.971698] ACPI: PCI interrupt for device 0000:04:06.0 disabled
[ 90.971724] bttv0: Can't enable device.
[ 90.977979] ACPI: PCI Interrupt 0000:04:07.0[A] -> GSI 22 (level, low) ->
IRQ 50
[ 90.979901] Audigy2 value: Special config.
[ 94.036669] ohci_hcd 0000:00:13.0: wakeup
[ 94.176319] Restarting tasks... done
[ 94.463890] uli526x: eth0 NIC Link is Down
[ 94.962721] uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
[ 99.454183] eth0: Tx timeout - resetting
[ 99.953673] uli526x: eth0 NIC Link is Down
[ 100.452483] uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
I could ping myself, but everything else was unreachable. Restarting the
init-service did not
help.
this was in the log:
===========================|
Jan 16 16:34:40 [kernel] [ 82.126839] ACPI: PCI interrupt for device
0000:04:07.0
disabled
Jan 16 16:34:40 [kernel] [ 82.126884] ACPI: PCI interrupt for device
0000:04:06.0
disabled
Jan 16 16:34:40 [kernel] [ 82.126942] ACPI: PCI interrupt for device
0000:00:13.3
disabled
Jan 16 16:34:40 [kernel] [ 82.134835] ACPI: PCI interrupt for device
0000:00:13.2
disabled
Jan 16 16:34:40 [kernel] [ 82.134864] ACPI: PCI interrupt for device
0000:00:13.1
disabled
Jan 16 16:34:40 [kernel] [ 82.134893] ACPI: PCI interrupt for device
0000:00:13.0
disabled
Jan 16 16:34:40 [kernel] [ 90.968167] ACPI: PCI Interrupt 0000:00:01.0[A] ->
GSI 29
(level, low) -> IRQ 169
Jan 16 16:34:40 [kernel] [ 90.968237] ACPI: PCI Interrupt 0000:00:02.0[A] ->
GSI 34
(level, low) -> IRQ 177
Jan 16 16:34:40 [kernel] [ 90.968398] ACPI: PCI Interrupt 0000:00:11.0[A] ->
GSI 17
(level, low) -> IRQ 217
Jan 16 16:34:40 [kernel] [ 90.968445] ACPI: PCI Interrupt 0000:00:12.0[A] ->
GSI 19
(level, low) -> IRQ 209
Jan 16 16:34:40 [kernel] [ 90.968485] ACPI: PCI Interrupt 0000:00:13.0[A] ->
GSI 20
(level, low) -> IRQ 233
Jan 16 16:34:40 [kernel] [ 90.968532] ACPI: PCI Interrupt 0000:00:13.1[B] ->
GSI 21
(level, low) -> IRQ 225
Jan 16 16:34:40 [kernel] [ 90.968580] ACPI: PCI Interrupt 0000:00:13.2[C] ->
GSI 22
(level, low) -> IRQ 50
Jan 16 16:34:40 [kernel] [ 90.970029] BUG: soft lockup detected on CPU#0!
Jan 16 16:34:40 [kernel] [ 90.970049] CPU 0:
Jan 16 16:34:40 [kernel] [ 90.970082] Modules linked in: w83627hf hwmon_vid
eeprom
i2c_isa i2c_ali1563 snd_seq_midi snd_emu10k1_synth snd_emux_synth
snd_seq_virmidi
snd_seq_midi_emul snd_pcm_oss snd_mixer_oss snd_seq_dummy snd_seq_oss
snd_seq_midi_event snd_seq snd_emu10k1 snd_rawmidi snd_ac97_codec snd_ac97_bus
snd_pcm snd_seq_device snd_timer snd_page_alloc snd_util_mem snd_hwdep snd
ehci_hcd ohci_hcd tuner bttv video_buf compat_ioctl32 i2c_algo_bit v4l2_common
btcx_risc ir_common tveeprom i2c_core videodev uli526x
Jan 16 16:34:40 [kernel] [ 90.970815] Pid: 0, comm: swapper Not tainted
2.6.15-git9 #1
Jan 16 16:34:40 [kernel] [ 90.970841] RIP: 0010:[<ffffffff8010ccfa>]
<ffffffff8010ccfa>{default_idle+42}
Jan 16 16:34:40 [kernel] [ 90.970888] RSP: 0018:ffffffff80453f78 EFLAGS:
00000246
Jan 16 16:34:40 [kernel] [ 90.970935] RAX: 0000000000000000 RBX:
ffffffff802e7274 RCX: ffffffff80341060
Jan 16 16:34:40 [kernel] [ 90.970963] RDX: 0000000000000000 RSI:
0000000000000001 RDI: ffffffff803de9d8
Jan 16 16:34:40 [kernel] [ 90.970990] RBP: 000000152e27355a R08:
ffffffff80452000
R09: 0000000000000000
Jan 16 16:34:40 [kernel] [ 90.971018] R10: 000000000000009b R11:
ffffffff80291770
R12: 0000000000000000
Jan 16 16:34:40 [kernel] [ 90.971046] R13: 00000000ffff2c58 R14:
ffffffff80345080
R15: ffff81003fbb5080
Jan 16 16:34:40 [kernel] [ 90.971074] FS: 00002aaaab0486e0(0000)
GS:ffffffff8044c000(0000) knlGS:0000000000000000
Jan 16 16:34:40 [kernel] [ 90.971107] CS: 0010 DS: 0018 ES: 0018 CR0:
000000008005003b
Jan 16 16:34:40 [kernel] [ 90.971134] CR2: 00002aaaab14d000 CR3:
000000003d681000 CR4: 00000000000006e0
Jan 16 16:34:40 [kernel] [ 90.971160]
Jan 16 16:34:40 [kernel] [ 90.971161] Call Trace:
<ffffffff8010ce24>{cpu_idle+68}
<ffffffff804547cf>{start_kernel+399}
Jan 16 16:34:40 [kernel] [ 90.971280]
<ffffffff80454283>{_sinittext+643}
Jan 16 16:34:40 [kernel] [ 90.971507] PCI: Enabling device 0000:00:13.3 (0000
->
0002)
Jan 16 16:34:40 [kernel] [ 90.971533] ACPI: PCI Interrupt 0000:00:13.3[D] ->
GSI 23
(level, low) -> IRQ 58
Jan 16 16:34:40 [kernel] [ 90.971649] ACPI: PCI Interrupt 0000:04:06.0[A] ->
GSI 21
(level, low) -> IRQ 225
Jan 16 16:34:40 [kernel] [ 90.971698] ACPI: PCI interrupt for device
0000:04:06.0
disabled
Jan 16 16:34:40 [kernel] [ 90.971724] bttv0: Can't enable device.
Jan 16 16:34:40 [kernel] [ 90.977979] ACPI: PCI Interrupt 0000:04:07.0[A] ->
GSI 22
(level, low) -> IRQ 50
Jan 16 16:34:40 [kernel] [ 90.979901] Audigy2 value: Special config.
Jan 16 16:34:40 [kernel] [ 94.036669] ohci_hcd 0000:00:13.0: wakeup
Jan 16 16:34:40 [kernel] [ 94.463890] uli526x: eth0 NIC Link is Down
Jan 16 16:34:41 [kernel] [ 94.962721] uli526x: eth0 NIC Link is Up 100 Mbps
Full
duplex
Jan 16 16:34:50 [kernel] [ 99.454183] eth0: Tx timeout - resetting
Jan 16 16:34:51 [kernel] [ 99.953673] uli526x: eth0 NIC Link is Down
Jan 16 16:34:52 [kernel] [ 100.452483] uli526x: eth0 NIC Link is Up 100 Mbps
Full
duplex
Jan 16 16:35:01 [kernel] [ 104.943955] eth0: Tx timeout - resetting
Jan 16 16:35:02 [kernel] [ 105.443435] uli526x: eth0 NIC Link is Down
Jan 16 16:35:03 [kernel] [ 105.942265] uli526x: eth0 NIC Link is Up 100 Mbps
Full
duplex
Jan 16 16:35:12 [kernel] [ 110.433726] eth0: Tx timeout - resetting
Jan 16 16:35:13 [kernel] [ 110.933217] uli526x: eth0 NIC Link is Down
Jan 16 16:35:14 [kernel] [ 111.432027] uli526x: eth0 NIC Link is Up 100 Mbps
Full
duplex
Jan 16 16:35:23 [kernel] [ 115.923498] eth0: Tx timeout - resetting
Jan 16 16:35:24 [kernel] [ 116.422979] uli526x: eth0 NIC Link is Down
Jan 16 16:35:25 [kernel] [ 116.921808] uli526x: eth0 NIC Link is Up 100 Mbps
Full
duplex
Jan 16 16:35:34 [kernel] [ 121.413269] eth0: Tx timeout - resetting
Jan 16 16:35:35 [kernel] [ 121.912760] uli526x: eth0 NIC Link is Down
Jan 16 16:35:36 [kernel] [ 122.411567] uli526x: eth0 NIC Link is Up 100 Mbps
Full
duplex
Jan 16 16:35:45 [kernel] [ 126.903041] eth0: Tx timeout - resetting
Jan 16 16:35:46 [kernel] [ 127.402518] uli526x: eth0 NIC Link is Down
Jan 16 16:35:47 [kernel] [ 127.901351] uli526x: eth0 NIC Link is Up 100 Mbps
Full
duplex
Jan 16 16:35:56 [kernel] [ 132.392813] eth0: Tx timeout - resetting
Jan 16 16:35:57 [kernel] [ 132.892303] uli526x: eth0 NIC Link is Down
Jan 16 16:35:58 [kernel] [ 133.391113] uli526x: eth0 NIC Link is Up 100 Mbps
Full
duplex
Jan 16 16:36:07 [kernel] [ 137.882585] eth0: Tx timeout - resetting
Jan 16 16:36:07 [init] Activating demand-procedures for 'A'
Jan 16 16:36:08 [kernel] [ 138.382066] uli526x: eth0 NIC Link is Down
Jan 16 16:36:09 [kernel] [ 138.880898] uli526x: eth0 NIC Link is Up 100 Mbps
Full
duplex
Jan 16 16:36:09 [kernel] [ 138.961400] Linux agpgart interface v0.101 (c) Dave
Jones
Jan 16 16:36:10 [kernel] [ 139.124715] nvidia: module license 'NVIDIA' taints
kernel.
Jan 16 16:36:10 [kernel] [ 139.127603] GSI 24 sharing vector 0x42 and IRQ 24
Jan 16 16:36:10 [kernel] [ 139.127607] ACPI: PCI Interrupt 0000:01:00.0[A] ->
GSI 25
(level, low) -> IRQ 66
Jan 16 16:36:10 [kernel] [ 139.127820] PCI: Enabling device 0000:03:00.0 (0000
->
0002)
Jan 16 16:36:10 [kernel] [ 139.127824] GSI 25 sharing vector 0x4A and IRQ 25
Jan 16 16:36:10 [kernel] [ 139.127826] ACPI: PCI Interrupt 0000:03:00.0[A] ->
GSI 16
(level, low) -> IRQ 74
Jan 16 16:36:10 [kernel] [ 139.127994] NVRM: loading NVIDIA Linux x86_64
NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:58:07 PST 2005
Jan 16 16:36:17 [kernel] [ 142.887263] eth0: Tx timeout - resetting
Jan 16 16:36:18 [kernel] [ 143.386762] uli526x: eth0 NIC Link is Down
Jan 16 16:36:20 [kernel] [ 144.384628] uli526x: eth0 NIC Link is Up 100 Mbps
Full
duplex
Jan 16 16:36:24 [kde(pam_unix)] session opened for user energyman by (uid=0)
Jan 16 16:36:28 [kernel] [ 149.277682] uli526x: eth0 NIC Link is Down
Jan 16 16:36:29 [kernel] [ 149.776517] uli526x: eth0 NIC Link is Up 100 Mbps
Full
duplex
Jan 16 16:36:38 [kernel] [ 154.267973] eth0: Tx timeout - resetting
Jan 16 16:36:39 [kernel] [ 154.922944] uli526x: eth0 NIC Link is Down
Jan 16 16:36:41 [kernel] [ 156.887930] uli526x: eth0 NIC Link is Up 100 Mbps
Full
duplex
Jan 16 16:37:08 [kernel] [ 170.640444] eth0: Tx timeout - resetting
Jan 16 16:37:09 [kernel] [ 171.139945] uli526x: eth0 NIC Link is Down
Jan 16 16:37:10 [kernel] [ 171.638759] uli526x: eth0 NIC Link is Up 100 Mbps
Full
duplex
Jan 16 16:37:28 [kernel] [ 180.622267] uli526x: eth0 NIC Link is Down
Jan 16 16:37:30 [kernel] [ 181.620150] uli526x: eth0 NIC Link is Up 100 Mbps
Full
duplex
Jan 16 16:37:51 [kernel] [ 193.001706] eth0: Tx timeout - resetting
Jan 16 16:37:52 [kernel] [ 193.501207] uli526x: eth0 NIC Link is Down
Jan 16 16:37:53 [kernel] [ 194.000004] uli526x: eth0 NIC Link is Up 100 Mbps
Full
duplex
Jan 16 16:38:13 [kernel] [ 203.981246] eth0: Tx timeout - resetting
Jan 16 16:38:14 [kernel] [ 204.480731] uli526x: eth0 NIC Link is Down
Jan 16 16:38:15 [kernel] [ 204.979563] uli526x: eth0 NIC Link is Up 100 Mbps
Full
duplex
Jan 16 16:38:38 [kernel] [ 216.457999] eth0: Tx timeout - resetting
Jan 16 16:38:39 [kernel] [ 216.957490] uli526x: eth0 NIC Link is Down
I loaded the nvidia module after trying to go to standby, for posting here and
it obviously
did not work. Nothing, a reboot could not solve. Oh, and it does not matter if
nvidia is
loaded and X started, the nic does not come back ;)
I tried three times, three times the same results. (not to ping, to go to
standby and come
back).
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
acpi-bugzilla mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
