http://bugzilla.kernel.org/show_bug.cgi?id=6539





------- Additional Comments From [EMAIL PROTECTED]  2006-05-12 13:55 -------
Created an attachment (id=8106)
 --> (http://bugzilla.kernel.org/attachment.cgi?id=8106&action=view)
lspci -vvv output with acpi=off

The output of lspci -vvv  with acpi=off is different from the
output of the same command when acpi is on at boot time:

--- lspci.txt   2006-05-12 01:35:46.000000000 +0300
+++ ../withoutacpi/lspci.txt    2006-05-12 01:53:30.000000000 +0300
@@ -36,11 +36,9 @@
                Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                Slot: AttnInd Off, PwrInd On, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-
-       Capabilities: [100] Virtual Channel
-       Capabilities: [140] Unknown (5)
 
 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI
Express Port 1 (rev 04) (prog-if 00 [Normal decode])
-       Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
+       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size 08
        Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
@@ -61,7 +59,7 @@
                Link: Speed 2.5Gb/s, Width x1
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
                Slot: Number 2, PowerLimit 6.500000
-               Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
+               Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                Slot: AttnInd Unknown, PwrInd Unknown, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-
        Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
@@ -70,11 +68,9 @@
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-       Capabilities: [100] Virtual Channel
-       Capabilities: [180] Unknown (5)
 
 00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI
Express Port 2 (rev 04) (prog-if 00 [Normal decode])
-       Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
+       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size 08
        Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
@@ -95,7 +91,7 @@
                Link: Speed 2.5Gb/s, Width x1
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
                Slot: Number 3, PowerLimit 6.500000
-               Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
+               Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                Slot: AttnInd Unknown, PwrInd Unknown, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-
        Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
@@ -104,11 +100,9 @@
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-       Capabilities: [100] Virtual Channel
-       Capabilities: [180] Unknown (5)
 
 00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI
Express Port 3 (rev 04) (prog-if 00 [Normal decode])
-       Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
+       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size 08
        Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
@@ -125,11 +119,11 @@
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3
                Link: Latency L0s <1us, L1 <4us
-               Link: ASPM Disabled RCB 64 bytes Disabled CommClk- ExtSynch-
+               Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
                Link: Speed 2.5Gb/s, Width x1
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
                Slot: Number 4, PowerLimit 6.500000
-               Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
+               Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                Slot: AttnInd Unknown, PwrInd Unknown, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-
        Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
@@ -138,8 +132,6 @@
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-       Capabilities: [100] Virtual Channel
-       Capabilities: [180] Unknown (5)
 
 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #1 (rev 04) (prog-if 00 [UHCI])
        Subsystem: Acer Incorporated [ALI] Unknown device 0066
@@ -162,7 +154,7 @@
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
-       Interrupt: pin C routed to IRQ 10
+       Interrupt: pin C routed to IRQ 11
        Region 4: I/O ports at 1840 [size=32]
 
 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #4 (rev 04) (prog-if 00 [UHCI])
@@ -202,7 +194,7 @@
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
-       Interrupt: pin A routed to IRQ 11
+       Interrupt: pin A routed to IRQ 10
        Region 0: I/O ports at 1c00 [size=256]
        Region 1: I/O ports at 1880 [size=64]
        Region 2: Memory at c8000800 (32-bit, non-prefetchable) [size=512]
@@ -215,7 +207,7 @@
        Subsystem: Acer Incorporated [ALI] Unknown device 0066
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
-       Interrupt: pin B routed to IRQ 10
+       Interrupt: pin B routed to IRQ 11
        Region 0: I/O ports at 2400 [size=256]
        Region 1: I/O ports at 2000 [size=128]
        Capabilities: [50] Power Management version 2
@@ -233,7 +225,7 @@
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
-       Interrupt: pin A routed to IRQ 10
+       Interrupt: pin A routed to IRQ 0
        Region 0: I/O ports at <unassigned>
        Region 1: I/O ports at <unassigned>
        Region 2: I/O ports at <unassigned>
@@ -273,14 +265,13 @@
                Link: Speed 2.5Gb/s, Width x16
        Capabilities: [80] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
                Address: 0000000000000000  Data: 0000
-       Capabilities: [100] Advanced Error Reporting
 
 06:01.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
        Subsystem: Acer Incorporated [ALI] Unknown device 0066
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 168, Cache Line Size 10
-       Interrupt: pin A routed to IRQ 10
+       Interrupt: pin A routed to IRQ 11
        Region 0: Memory at c8208000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=06, secondary=07, subordinate=08, sec-latency=176
        Memory window 0: 30000000-31fff000 (prefetchable)
@@ -295,7 +286,7 @@
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (750ns min, 1000ns max), Cache Line Size 08
-       Interrupt: pin A routed to IRQ 10
+       Interrupt: pin A routed to IRQ 11
        Region 0: Memory at c8209000 (32-bit, non-prefetchable) [size=2K]
        Region 1: Memory at c8200000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2


------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.


-------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
acpi-bugzilla mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla

Reply via email to