http://bugzilla.kernel.org/show_bug.cgi?id=10657
------- Comment #6 from [EMAIL PROTECTED] 2008-05-14 12:45 ------- CONFIG_ASUS_LAPTOP is set. CONFIG_ACPI_PROCFS is set too. Compiled both, old and new one, as module. Both loads fine, but not at the same time - of cause, thats what i am facing above. However i miss some things: With asus_acpi i can control the power/backlight of the display (on or off) with echo 0|1 > /proc/acpi/asus/lcd. /sys/class/backlight is empty like /sys/class/leds, how can i do this with asus-laptop module? Switching the display output (lcd,crt,tvout) i am still testing (searching my monitor cable), if it still works like it does with the old module: e.g.: echo $((10#00000062-60)) > /proc/acpi/asus/disp Or is this done different now? Looking at the sourcecode it tells 1,2,4,8 or bitwise combination of them. This change should be documented somewhere (where everyone who switches the driver knows, that he MUST update the scripts, as values have changed.), am i right? So far i can see, brightness, battery, volume up/down/mute are still working fine. thx. -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ acpi-bugzilla mailing list acpi-bugzilla@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
