http://bugzilla.kernel.org/show_bug.cgi?id=10884
------- Comment #6 from [EMAIL PROTECTED] 2008-06-12 13:45 ------- dmesg.acpi=off shows the device: ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 ... ata4.01: ATAPI: TSSTcorp CDDVDW SN-S082H, SB00, max UDMA/33 ata4.01: configured for UDMA/33 scsi 3:0:1:0: CD-ROM TSSTcorp CDDVDW SN-S082H SB00 PQ: 0 ANSI: 5 Uniform Multi-Platform E-IDE driver ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:1:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 3:0:1:0: Attached scsi generic sg1 type 5 When you use this device, does its interrupts show up on irq 14? please attach the /proc/interrupts for both normal and acpi=off boots. Rather than "acpi=off", does booting with any of these help?: pci=nommconf acpi=noirq noapic -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ acpi-bugzilla mailing list acpi-bugzilla@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
