http://bugzilla.kernel.org/show_bug.cgi?id=10699
--- Comment #34 from Mike Trim <mike.t...@gmail.com> 2009-04-06 18:48:22 --- Created an attachment (id=20833) --> (http://bugzilla.kernel.org/attachment.cgi?id=20833) Console session log with patch from comment #33 I have tested again with v2.6.29 + the patch from comment #33 above. This patch does have an effect on the behaviour. With just v2.6.29, all calls to `cat /proc/acpi/battery/BAT1/state` after loading msi-laptop returned 'unknown' state. With v2.6.29+patch, sometimes the results is 'unknown' and other times some values are returned, however these values are incorrect and change randomly. Somewhat different values are returned if the mains cable is disconnected also (see end of console log). The patch results in a log of identical messages on dmesg (see next attachment): ACPI: EC: non-query interrupt received, switching to interrupt mode Also note the following messages in the dmesg output occur when the mains cable is plugged/unplugged: atkbd.c: Unknown key pressed (translated set 2, code 0xf1 on isa0060/serio0). -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug. ------------------------------------------------------------------------------ This SF.net email is sponsored by: High Quality Requirements in a Collaborative Environment. Download a free trial of Rational Requirements Composer Now! http://p.sf.net/sfu/www-ibm-com _______________________________________________ acpi-bugzilla mailing list acpi-bugzilla@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
