http://bugzilla.kernel.org/show_bug.cgi?id=13268
--- Comment #13 from ykzhao <yakui.z...@intel.com> 2009-05-11 03:41:44 ---
Hi, Rui
As there exists the GPE storm on GPE00, it can't be disabled by using the
command of "echo disable > /sys/firmware/acpi/interrupts/gpe00".
And the problem is related with the bogus GPE _L00 method.
From the ICH4 chipset it seems that the GPE00 is driven by THRM signal. And
whether the GPE00_STS is set is controlled by the bit of THRM_POL.
In the custom DSDT the polarity of THRM_POL bit is inverted. But from the
log it seems that the problem still exists even after the custom DSDT is used.
Thanks.
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
acpi-bugzilla mailing list
acpi-bugzilla@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
