https://bugzilla.kernel.org/show_bug.cgi?id=51071
--- Comment #2 from Zdenek Kabelac <zdenek.kabe...@gmail.com> 2012-11-28
18:14:30 ---
Here is my boot log - which is showing some APCI table errors.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.7.0-rc6-00117-g17a96ce (kabi@linux) (gcc version 4.7.2 20121109
(Red Hat 4.7.2-8) (GCC) ) #102 SMP PREEMPT Fri Nov 23 11:22:49 CET 2012
Command line: ro root=/dev/sda2 selinux=0 no_console_suspend intel_iommu=on
kmemleak=off lockdep.prove_locking=0 lockdep.lock_stat=0
SYSFONT=latarcyrheb-sun16 LANG=cs_CZ.UTF-8 KEYTABLE=us systemd.log_level=info
systemd.log_target=kmsg console=ttyS0,115200n8 console=tty ipv6.disable=1
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf6affff] usable
BIOS-e820: [mem 0x00000000bf6b0000-0x00000000bf6cbfff] ACPI data
BIOS-e820: [mem 0x00000000bf6cc000-0x00000000bf6fffff] ACPI NVS
BIOS-e820: [mem 0x00000000bf700000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013bffffff] usable
kmemleak: Kernel memory leak detector disabled
NX (Execute Disable) protection: active
DMI present.
No AGP bridge found
e820: last_pfn = 0x13c000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
total RAM covered: 4023M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G
e820: last_pfn = 0xbf6b0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f68f0-0x000f68ff] mapped at [ffff8800000f68f0]
init_memory_mapping: [mem 0x00000000-0xbf6affff]
init_memory_mapping: [mem 0x100000000-0x13bffffff]
RAMDISK: [mem 0x37830000-0x37feffff]
ACPI: RSDP 00000000000f68c0 00024 (v02 LENOVO)
ACPI: XSDT 00000000bf6bb496 0009C (v01 LENOVO TP-7U 00002290 LTP 00000000)
ACPI: FACP 00000000bf6bb600 000F4 (v03 LENOVO TP-7U 00002290 LNVO 00000001)
ACPI BIOS Bug: Warning: 32/64X length mismatch in FADT/Gpe1Block: 0/32
(20120913/tbfadt-567)
ACPI BIOS Bug: Warning: Optional FADT field Gpe1Block has zero address or
length: 0x000000000000102C/0x0 (20120913/tbfadt-598)
ACPI: DSDT 00000000bf6bba1d 1003C (v01 LENOVO TP-7U 00002290 MSFT 03000000)
ACPI: FACS 00000000bf6e4000 00040
ACPI: SSDT 00000000bf6bb7b4 00269 (v01 LENOVO TP-7U 00002290 MSFT 03000000)
ACPI: ECDT 00000000bf6cba59 00052 (v01 LENOVO TP-7U 00002290 LNVO 00000001)
ACPI: TCPA 00000000bf6cbaab 00032 (v02 LENOVO TP-7U 00002290 LNVO 00000001)
ACPI: APIC 00000000bf6cbadd 00068 (v01 LENOVO TP-7U 00002290 LNVO 00000001)
ACPI: MCFG 00000000bf6cbb45 0003C (v01 LENOVO TP-7U 00002290 LNVO 00000001)
ACPI: HPET 00000000bf6cbb81 00038 (v01 LENOVO TP-7U 00002290 LNVO 00000001)
ACPI: SLIC 00000000bf6cbbb9 00176 (v01 LENOVO TP-7U 00002290 LTP 00000000)
ACPI: SLAC 00000000bf6cbdf0 00176 (v01 LENOVO TP-7U 00002290 LTP 00000000)
ACPI: BOOT 00000000bf6cbf66 00028 (v01 LENOVO TP-7U 00002290 LTP 00000001)
ACPI: ASF! 00000000bf6cbf8e 00072 (v16 LENOVO TP-7U 00002290 PTL 00000001)
ACPI: SSDT 00000000bf6e26d9 0025F (v01 LENOVO TP-7U 00002290 INTL 20050513)
ACPI: SSDT 00000000bf6e2938 000A6 (v01 LENOVO TP-7U 00002290 INTL 20050513)
ACPI: SSDT 00000000bf6e29de 004F7 (v01 LENOVO TP-7U 00002290 INTL 20050513)
ACPI: SSDT 00000000bf6e2ed5 001D8 (v01 LENOVO TP-7U 00002290 INTL 20050513)
ACPI: DMI detected: Lenovo ThinkPad T61
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x13bffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0xbf6affff]
node 0: [mem 0x100000000-0x13bffffff]
ACPI: PM-Timer IO Port: 0x1008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf6b0000 - 00000000bf6cc000
PM: Registered nosave memory: 00000000bf6cc000 - 00000000bf700000
PM: Registered nosave memory: 00000000bf700000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000
PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0xc0000000-0xefffffff] available for PCI devices
setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 476 pages/cpu @ffff880137200000 s1918400 r8192 d23104 u2097152
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1009463
Kernel command line: ro root=/dev/sda2 selinux=0 no_console_suspend
intel_iommu=on kmemleak=off lockdep.prove_locking=0 lockdep.lock_stat=0
SYSFONT=latarcyrheb-sun16 LANG=cs_CZ.UTF-8 KEYTABLE=us systemd.log_level=info
systemd.log_target=kmsg console=ttyS0,115200n8 console=tty ipv6.disable=1
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Memory: 3944524k/5177344k available (5520k kernel code, 1058572k absent,
174248k reserved, 5503k data, 2612k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
RCU debugfs-based tracing is enabled.
RCU dyntick-idle grace-period acceleration is enabled.
RCU lockdep checking is enabled.
Additional per-CPU info printed with stalls.
NR_IRQS:4352 nr_irqs:512 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 16384
... MAX_LOCKDEP_CHAINS: 32768
... CHAINHASH_SIZE: 16384
memory used by lock dependency info: 6367 kB
per task-struct memory footprint: 2688 bytes
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
tsc: Fast TSC calibration using PIT
tsc: Detected 2194.524 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency..
4390.92 BogoMIPS (lpj=7315080)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20120913
ftrace: allocating 18620 entries in 73 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz (fam: 06, model:
0f, stepping: 0a)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
SMP alternatives: lockdep: fixing up alternatives
smpboot: Booting Node 0, Processors #1 OK
TSC synchronization [CPU#0 -> CPU#1]:
Measured 399476 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Brought up 2 CPUs
smpboot: Total of 2 processors activated (8781.85 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbf6cc000-0xbf6fffff] (212992 bytes)
regulator-dummy: no parameters
RTC time: 10:47:02, date: 11/28/12
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base
0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux)
ACPI: EC: EC description table is found, configuring boot EC
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI
ACPI: SSDT 00000000bf6e1b32 002C4 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 002C4 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
ACPI: SSDT 00000000bf6e1e7b 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
ACPI: SSDT 00000000bf6e1a6a 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
ACPI: SSDT 00000000bf6e1df6 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [PUBS] (on)
ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
ACPI: ACPI Dock Station Driver: 3 docks/bays found
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and
report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only
partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via cardbus
function)
pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller
pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type scsi registered
PCI: Using ACPI for IRQ routing
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: [io 0x1000-0x107f] has been reserved
system 00:02: [io 0x1180-0x11bf] has been reserved
system 00:02: [io 0x0800-0x080f] has been reserved
system 00:02: [io 0x15e0-0x15ef] has been reserved
system 00:02: [io 0x1600-0x165f] could not be reserved
system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff]
pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xdc000000-0xdf3fffff]
pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff]
pci 0000:00:1c.2: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd5ffffff]
pci 0000:00:1c.3: bridge window [mem 0xdf800000-0xdf8fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd1ffffff]
pci 0000:00:1c.4: bridge window [mem 0xdf500000-0xdf5fffff 64bit pref]
pci 0000:15:00.0: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref]
pci 0000:15:00.0: BAR 16: assigned [mem 0xc0000000-0xc3ffffff]
pci 0000:15:00.0: BAR 13: assigned [io 0x7000-0x70ff]
pci 0000:15:00.0: BAR 14: assigned [io 0x7400-0x74ff]
pci 0000:15:00.0: CardBus bridge to [bus 16-17]
pci 0000:15:00.0: bridge window [io 0x7000-0x70ff]
pci 0000:15:00.0: bridge window [io 0x7400-0x74ff]
pci 0000:15:00.0: bridge window [mem 0xf4000000-0xf7ffffff pref]
pci 0000:15:00.0: bridge window [mem 0xc0000000-0xc3ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 15-18]
pci 0000:00:1e.0: bridge window [io 0x7000-0xafff]
pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff]
pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
pci 0000:00:1e.0: enabling device (0005 -> 0007)
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 32768 (order: 9, 2621440 bytes)
TCP: Hash tables configured (established 262144 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 6, 393216 bytes)
UDP-Lite hash table entries: 2048 (order: 6, 393216 bytes)
NET: Registered protocol family 1
pci 0000:00:1a.1: power state changed by ACPI to D0
pci 0000:00:1d.0: power state changed by ACPI to D0
pci 0000:00:1d.2: power state changed by ACPI to D0
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 7936k freed
DMA-API: preallocated 32768 debug entries
DMA-API: debugging enabled by kernel config
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbb6ae000-0xbf6adfff] (64MB) mapped at
[ffff8800bb6ae000-ffff8800bf6adfff]
Simple Boot Flag at 0x35 set to 0x1
sha1_ssse3: Using SSSE3 optimized SHA-1 implementation
audit: initializing netlink socket (disabled)
type=2000 audit(1354099621.543:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
msgmni has been set to 7719
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Deprecated procfs I/F for AC is loaded, please retry with
CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (58 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (60 C)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
brd: module loaded
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
ACPI: Deprecated procfs I/F for battery is loaded, please retry with
CONFIG_ACPI_PROCFS_POWER cleared
scsi0 : ahci
ACPI: Battery Slot [BAT0] (battery present)
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 45
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 45
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
hdaps: inverting axis (3) readings
hdaps: LENOVO ThinkPad T61 detected
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input3
input: hdaps as /devices/platform/hdaps/input/input4
hdaps: driver successfully loaded
TCP: cubic registered
NET: Registered protocol family 17
Key type dns_resolver registered
registered taskstats version 1
Key type encrypted registered
EVM: Error registering secfs
Magic number: 4:431:781
rtc_cmos 00:07: setting system clock to 2012-11-28 10:47:04 UTC (1354099624)
ata4.00: ATAPI: MATSHITADVD-RAM UJ-842 z, RC01, max UDMA/33
ata4.00: configured for UDMA/33
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 CXM0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-842 z RC01 PQ: 0 ANSI: 5
scsi 3:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 2612k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 612k freed
Freeing unused kernel memory: 1844k freed
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
uhci_hcd: USB Universal Host Controller Interface driver
yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: EHCI Host Controller
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.7.0-rc6-00117-g17a96ce ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0428, PCI irq 16
yenta_cardbus 0000:15:00.0: Socket status: 30000006
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io
0x7000-0xafff]
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem
0xf8300000-0xfbffffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xf8300000-0xfbffffff:
excluding 0xf8300000-0xf86cffff
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem
0xf4000000-0xf7ffffff 64bit pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4000000-0xf7ffffff:
excluding 0xf4000000-0xf7ffffff
hub 1-0:1.0: 4 ports detected
sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to
support it.
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to
support it.
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.7.0-rc6-00117-g17a96ce uhci_hcd
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to
support it.
usb usb2: SerialNumber: 0000:00:1a.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to
support it.
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.7.0-rc6-00117-g17a96ce uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to
support it.
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to
support it.
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.7.0-rc6-00117-g17a96ce ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.7
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.7.0-rc6-00117-g17a96ce uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.7.0-rc6-00117-g17a96ce uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.7.0-rc6-00117-g17a96ce uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 1-4: new high-speed USB device number 3 using ehci_hcd
usb 1-4: New USB device found, idVendor=04b3, idProduct=4485
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
usb 2-2: new full-speed USB device number 2 using uhci_hcd
usb 2-2: New USB device found, idVendor=0483, idProduct=2016
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: Biometric Coprocessor
usb 2-2: Manufacturer: STMicroelectronics
usb 1-4.4: new low-speed USB device number 4 using ehci_hcd
usb 1-4.4: New USB device found, idVendor=046d, idProduct=c016
usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.4: Product: Optical USB Mouse
usb 1-4.4: Manufacturer: Logitech
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised:
dm-de...@redhat.com
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
loop: module loaded
EXT4-fs (sda2): re-mounted. Opts: data=ordered
Non-volatile memory driver v1.3
wmi: Mapper loaded
thinkpad_acpi: ThinkPad ACPI Extras v0.24
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 7LETC9WW (2.29 ), EC 7KHT24WW-1.08
thinkpad_acpi: Lenovo ThinkPad T61, model 6464CTO
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic
conservative mode
thinkpad_acpi: ACPI backlight control delay disabled
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control,
supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
r592: driver successfully loaded
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xcffff 0xe0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
excluding 0xa0000000-0xa0ffffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
excluding 0x60000000-0x60ffffff
r852: driver loaded successfully
cfg80211: Calling CRDA to update world regulatory domain
microcode: CPU0 sig=0x6fa, pf=0x80, revision=0x95
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
microcode: CPU1 sig=0x6fa, pf=0x80, revision=0x95
microcode: Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>, Peter
Oruba
thinkpad_acpi: Standard ACPI backlight interface available, not loading native
one
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux,
in-tree:s
iwl3945: Copyright(c) 2003-2011 Intel Corporation
cfg80211: World regulatory domain updated:
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:25:14:4a:e2
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 6, PBA No: FFFFFF-0FF
ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with
Region \_SB_.PCI0.LPC_.PMIO 1 (20120913/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead
of the native driver
ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with
Region \_SB_.PCI0.LPC_.LPIO 1 (20120913/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead
of the native driver
ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with
Region \_SB_.PCI0.LPC_.LPIO 1 (20120913/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead
of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
input: Logitech Optical USB Mouse as
/devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.4/1-4.4:1.0/input/input6
hid-generic 0003:046D:C016.0001: input: USB HID v1.10 Mouse [Logitech Optical
USB Mouse] on usb-0000:00:1a.7-4.4/input0
iTCO_vendor_support: vendor-support=0
hda_intel: probe_mask set to 0x1 for device 17aa:20ac
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts:
data=ordered,user_xattr
psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps:
0xa04793/0x300000/0x0, board id: 71, fw id: 67352
psmouse serio1: synaptics: serio: Synaptics pass-through port at
isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input7
usb 2-1: new full-speed USB device number 3 using uhci_hcd
usb 2-1: New USB device found, idVendor=0a5c, idProduct=2110
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: BCM2045B
usb 2-1: Manufacturer: Broadcom Corp
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
--
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
------------------------------------------------------------------------------
Keep yourself connected to Go Parallel:
INSIGHTS What's next for parallel hardware, programming and related areas?
Interviews and blogs by thought leaders keep you ahead of the curve.
http://goparallel.sourceforge.net
_______________________________________________
acpi-bugzilla mailing list
acpi-bugzilla@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
