https://bugzilla.kernel.org/show_bug.cgi?id=217225
--- Comment #9 from runrin (run....@rin.run) --- Immediately after a reboot: # cat /etc/modprobe.d/thinkpad_acpi.conf options thinkpad_acpi fan_control=1 # cat /sys/module/thinkpad_acpi/parameters/fan_control N # cat /proc/acpi/ibm/fan status: enabled speed: 3900 level: auto # rmmod thinkpad_acpi # modprobe thinkpad_acpi # cat /sys/module/thinkpad_acpi/parameters/fan_control Y # cat /proc/acpi/ibm/fan status: enabled speed: 3900 level: auto commands: level <level> (<level> is 0-7, auto, disengaged, full-speed) commands: enable, disable commands: watchdog <timeout> (<timeout> is 0 (off), 1-120 (seconds)) After a reboot, fan_control is back to `N'. I'm not sure why it's not picking up the parameter on boot, but manually running `rmmod' then `modprobe' seems to fix it temporarily at least. -- You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug. _______________________________________________ acpi-bugzilla mailing list acpi-bugzilla@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla