RE: [ActiveDir] OT: Cannot send mail to/from e5.5 to/from e2k and 2way CA

[Pelle, Joe]

Title: Message

Ironically I was in a lab for a while and was told to get everything into production (prior to even getting to test e2k) so this is a little bitter ;) I think I'll get over it though.  We were struggling with Active / Active for a couple of days and decided that A/P would be better initially and we could always switch to A/A in the future.     Do you have any recommendations on that for my production lab?   Thanks again!   Joe Pelle Systems Administrator Information Technology Valassis / Targeted Print & Media Solutions 35955 Schoolcraft Rd.   Livonia, MI  48150 Tel 734.632.3753      Fax 734.632.6240 [EMAIL PROTECTED] http://www.valassis.com/   This message may have included proprietary or protected information.  This message and the information contained herein are not to be further communicated without my express written consent.   -----Original Message----- From: Marc Zukerman [mailto:[EMAIL PROTECTED] Sent: Monday, February 24, 2003 6:36 PM To: [EMAIL PROTECTED] Subject: Re: [ActiveDir] OT: Cannot send mail to/from e5.5 to/from e2k an d 2way CA   I was in a lab, so it was easy just to start from scratch. If this was done in production, I think (correct me if I'm wrong everyone) that you need just remove all Exchange 2000 servers from the organization and then remove the AD information. The following article shows this.   http://support.microsoft.com/default.aspx?scid=kb;EN-US;273478   If you have already established mailboxes on this cluster, you will probably have to exmerge them to a pst and then put them on the Exchange 5.5 server. You can't move it if they aren't communicating.   Good luck, and might I recommend a lab? lol   Marc Zukerman Senior Network Engineer Greenwich Technology Partners ----- Original Message ----- From: Pelle, Joe To: '[EMAIL PROTECTED]' Sent: Monday, February 24, 2003 5:56 PM Subject: RE: [ActiveDir] OT: Cannot send mail to/from e5.5 to/from e2k an d 2way CA   Marc,   Thank you for the response - am I screwed then since I already have the first e2k server installed on the cluster?    Joe Pelle Systems Administrator Information Technology Valassis / Targeted Print & Media Solutions 35955 Schoolcraft Rd.   Livonia, MI  48150 Tel 734.632.3753      Fax 734.632.6240 [EMAIL PROTECTED] http://www.valassis.com/   This message may have included proprietary or protected information.  This message and the information contained herein are not to be further communicated without my express written consent.   -----Original Message----- From: Marc Zukerman [mailto:[EMAIL PROTECTED] Sent: Monday, February 24, 2003 5:49 PM To: [EMAIL PROTECTED] Subject: Re: [ActiveDir] OT: Cannot send mail to/from e5.5 to/from e2k an d 2way CA   http://www.mail-archive.com/[EMAIL PROTECTED]/msg05805.html   I posted a note earlier about this problem.   Marc Zukerman Senior Network Engineer Greenwich Technology Partners ----- Original Message ----- From: Roger Seielstad To: '[EMAIL PROTECTED]' Sent: Monday, February 24, 2003 5:23 PM Subject: RE: [ActiveDir] OT: Cannot send mail to/from e5.5 to/from e2k an d 2way CA   Won't work. WHich is clearly spelled out in the release notes for E2k. I suggest you reread them to see exactly what's going on.   Roger -------------------------------------------------------------- Roger D. Seielstad - MCSE Sr. Systems Administrator Inovis Inc. -----Original Message----- From: Pelle, Joe [mailto:[EMAIL PROTECTED] Sent: Monday, February 24, 2003 5:13 PM To: '[EMAIL PROTECTED]' Subject: RE: [ActiveDir] OT: Cannot send mail to/from e5.5 to/from e2k an d 2way CA yes   Joe Pelle Systems Administrator Information Technology Valassis / Targeted Print & Media Solutions 35955 Schoolcraft Rd.   Livonia, MI  48150 Tel 734.632.3753      Fax 734.632.6240 [EMAIL PROTECTED] http://www.valassis.com/   This message may have included proprietary or protected information.  This message and the information contained herein are not to be further communicated without my express written consent.   -----Original Message----- From: Roger Seielstad [mailto:[EMAIL PROTECTED] Sent: Monday, February 24, 2003 4:55 PM To: '[EMAIL PROTECTED]' Subject: RE: [ActiveDir] OT: Cannot send mail to/from e5.5 to/from e2k an d 2way CA   Was the cluster the first E2k machine you installed?     -------------------------------------------------------------- Roger D. Seielstad - MCSE Sr. Systems Administrator Inovis Inc. -----Original Message----- From: Pelle, Joe [mailto:[EMAIL PROTECTED] Sent: Monday, February 24, 2003 4:11 PM To: [EMAIL PROTECTED] Subject: [ActiveDir] OT: Cannot send mail to/from e5.5 to/from e2k and 2way CA Hello, I set up an Active/Passive cluster for Exchange 2000 sp3 and have an existing 5.5 sp4 organization - I want to be able to send mail to/from 5.5 and 2000 during our migration to Active Directory.  Do any of you have experience setting up the Active Directory Connector?  This is the KB article I followed (Second Scenario):   http://support.microsoft.com/default.aspx?scid=kb;en-us;296260   Any help would be greatly appreciated!    Thanks!   Joe Pelle Systems Administrator Information Technology Valassis / Targeted Print & Media Solutions 35955 Schoolcraft Rd.   Livonia, MI  48150 Tel 734.632.3753      Fax 734.632.6240 [EMAIL PROTECTED] http://www.valassis.com/   This message may have included proprietary or protected information.  This message and the information contained herein are not to be further communicated without my express written consent.